Beruflich Dokumente
Kultur Dokumente
CLICK ON THE PAGE YOU’D LIKE TO VISIT OR FLIP THROUGH OUR BROCHURE
CLICK ON THE PAGE YOU’D LIKE TO VISIT OR FLIP THROUGH OUR BROCHURE
HIGH PERFORMANCE
FLOOR COATING
WB EPOXY PRIMER
METALLIC PIGMENTS
CLICK HERE TO WATCH VIDEO
<< Back to Table of Contents
METALLIC EPOXY
• Water-based
• Low Odor
• VOC Compliant
• UV Resistant
• Impact and Abrasion CLICK HERE TO WATCH VIDEO
Resistant
• Easy to Clean
One of the most advanced Top Coats on the market hands down. Our
• Enhances Color High Wear Urethane adds value, durability, and ease of maintenance. It is
• Clear Non-yellowing designed for use where long-lasting protection of decorative substrates
is required.
• Good Working Time
• Excellent Adhesion Pot Life (Gel Time) 150gm @72°F.........................................................................................1-1.5 hr.
Tack Free over concrete (@ 6 mil) @72°F...........................................................................4 hr.
• USDA & FDA Compliant Foot Traffic -1st coat- over concrete @72°F......................................................................8 hr.
Foot Traffic -sealed surface- @72°F.....................................................................................12-16 hr.
• Gloss or Matte Full Cure (@ 6mil).......................................................................................................................72 hr.
Pencil Hardness.........................................................................................................................2H
Adhesion on Concrete (7 day cure) ASTM D3359..........................................................5
Sag & Leveling ASTM D4400.................................................................................................4
Reducer/Clean Up.....................................................................................................................Water
<< Back to Table of Contents
HIGH-GLOSS FINISH
TOP COATS
MATTE/SATIN FINISH
TOP COATS
MISSION STATEMENT
CLICK HERE TO WATCH VIDEO
install epoxy that thin you will never get the dynamic looks,
flow, marbleization, and effects that our Metallic Epoxy
System creates. When you choose our system you’re getting
an industrial grade product with proprietary additives
specifically designed to create longer working time before
setting up. It will bond better, last longer, has higher scratch
resistance and it’s 2x to 3x thicker than any other product
available while still having competitive pricing. Order
with confidence knowing you’re getting the best system
available that has been tested and proven.
<< Back to Table of Contents
WHAT’S IN A LEGGARI
FLOOR KIT?
The 2 reasons everyone says our floor kits are so easy to install is because our
Metallic Epoxy resin is a living, flowing resin during its curing process. Our resin
is more fluid than any other resin on the market, making it easier to self-level,
creating that natural look of blended colors without the installer needing an
CLICK HERE TO WATCH VIDEO artistic touch. All of our kits are pre-measured into 3 gallons so you don’t have to
measure out every gallon.
PREPPING THE SUBSTRATE OR SURFACE
One of the best ways to prep your surface is diamond grinding. You can rent
concrete grinders at most rental stores. The next best way is using an etching
chemical to etch the surface of the concrete. You can also sand the surface if
the before mentioned methods can’t be done. If you can only prep minimally
or can’t prep at all we have a Prep Replacement Primer to help achieve a
strong bond. We always recommend prepping the concrete surface first.
CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO
DISPERSING EFFECTS
Designed to create unique effects in the epoxy
surface by mixing any of our metallic pigment with
91% or higher isoprophyl alcohol. Once sprayed
onto the surface of our epoxy it will disperse the
surface creating dynamic looks, colors and cells. Mix
ratio is 3 teaspoons of metallic powder to 15 fl oz of
isopropyl alcohol.
DECAL LOGOS, STICKERS
AND PICTURES
It’s simple, all you need to do is go to your local vinyl decal
shop and have them print your logo, sticker or picture with an
adhesive backing (just like stickers are made). Before you apply
your top coat, place your decal or picture on the epoxy surface
and apply your Urethane Top Coat right over it. Now you have a
custom logo or picture in your floor that’s protected by our High
CLICK HERE TO WATCH VIDEO
Wear Urethane Top Coat.
ENDLESS TECHNIQUES
AND LOOKS
One of the coolest parts about our Floor Kits, besides the
fact that you can transform your floor in 2 days, is our
endless design techniques and possibilities . We are always
inventing new techniques to achieve different looks that
are frequently copied by competitors.
CLICK HERE TO WATCH VIDEO
CUSTOMER INSTALLS
Base Coat: Silver Base Coat: Green Apple Base Coat: Coffee
Highlights: Titanium Highlights: Black Highlights: Black
Base Coat: Coffee
Highlights: Brass
CUSTOMER INSTALLS
Base Coat: Pearl White Base Coat: Black Base Coat: silver
Highlights: Titanium Highlights: Brass & Orange Highlights: Pearl White
Base Coat: Silver Base Coat: White
Highlights: Black Highlights: Deep Blue
CUSTOMER INSTALLS
Base Coat: Pearl White Base Coat: Silver
Highlights: Moss Green Highlights: Pearl White
Base Coat: Pearl White Base Coat: Black Base Coat: Silver
Highlights: Black Highlights: Silver & Orange Highlights: Titanium
<< Back to Table of Contents
CUSTOMER INSTALLS
FLOORS WITH MATTE FINISH TOP COATS
SCIENTIFICALLY ENGINEERED
COUNTERTOP SYSTEMS
Leggari Countertop Kits were designed to transform your countertop, tabletop, or
desktop into something new and beautiful by coating your existing countertop
or pre-built wood countertop. They can be installed in 3 to 5 hrs. including the
prep work, and will last for decades. If you can paint your countertops, you’re
more than qualified to install a Leggari Countertop Kit. Our Countertop system is
leading the resin industry for thickness, durability, and scratch resistance with our
High Wear Top Coats.
WB EPOXY PRIMER
METALLIC PIGMENTS
METALLIC EPOXY
Our Countertop Epoxy is
specifically designed for counters
and can be applied to any hard
surface. It’s 100% Pure Solids
using the finest raw materials that
include proprietary additives for
working time, thickness, flow and
marbleization that are vital when
achieving our Dynamic Effects.
CLICK HERE TO WATCH VIDEO
Our Countertop Epoxy is also a
decorative, durable and chemically
resistant coating, available with a
High Gloss or Matte finish.
TYPICAL PHYSICAL PROPERTIES @ 75°F (24°C)
Viscosity (mixed)......................................................................50 cps
Solids Content...........................................................................100% • Durable
Pot Life (1 gallon mass)..........................................................Approximately 30 minutes
Tack-Free Time:.........................................................................50°F : 10-12 hrs. 75°F : 4-6 hrs. 90°F :2-4 hrs. • Seamless
Compressive Strength ASTM D695....................................2,900 psi (Resin & Hardener)
Tensile Strength ASTM D638................................................,400 psi (Resin & Hardener) • Unique Effects
Adhesion ASTM D4541..........................................................>400 psi
Water Absorption MIL-D-3134.............................................<1.0% • Variety of Colors
Abrasion Resistance ASTM D4060.....................................0.09 gr (CS17, 1000gr load, 1000 cycles)
Flammability ASTM D635......................................................Self-Extinguishing (Bonded to Concrete) • Chemically Resistant
VOC...............................................................................................3 g/L
Microbial Resistant ASTM G21.............................................Passes Rating 1
• USDA & FDA Compliant
GLAZE COAT TOP COAT
• 100% Solids
• Low Odor
• VOC Compliant
• UV Resistant
• Impact and Abrasion CLICK HERE TO WATCH VIDEO
Resistant
• Easy to Clean
Glaze Coat is a state of the art, 100% solids, UV resistant coating designed
• Enhances Color to create a glass smooth surface while still adding extreme depth, durability
• Clear Non-yellowing and scratch resistance to any decorative surface.
• Water Based
• Low Odor
• VOC Compliant
• UV Resistant
• Impact and Abrasion CLICK HERE TO WATCH VIDEO
Resistant
• Easy to Clean
One of the most advanced Top Coats on the Market hands down. Our
• Enhances Color high wear Urethane adds value, durability, and ease of maintenance. It is
• Clear Non-yellowing designed for use where long-lasting protection of decorative substrates
is required.
• Good Working Time
• Excellent Adhesion Pot Life (Gel Time) 150gm @72°F.........................................................................................1-1.5 hr.
Tack Free over concrete (@ 6 mil) @72°F...........................................................................4 hr.
• USDA & FDA Compliant Foot Traffic -1st coat- over concrete @72°F......................................................................8 hr.
Foot Traffic -sealed surface- @72°F.....................................................................................12-16 hr.
• Gloss or Matte Full Cure (@ 6mil).......................................................................................................................72 hr.
Pencil Hardness.........................................................................................................................2H
Adhesion on Concrete (7 day cure) ASTM D3359..........................................................5
Sag & Leveling ASTM D4400.................................................................................................4
Reducer/Clean Up.....................................................................................................................Water
THE SUBSTRATE
Prepping the surface of the countertops is easy. Most surfaces just need
sanded (80-100 Grit) then wiped clean. Granite and Marble will need the
sealer removed. Tile will need the grout lines filled with Bondo and sanded
smooth before applying our Countertop Kits.
FINISHED COUNTERTOPS
**APPLICATION DETAILS ARE ADDRESSED IN OUR TUTORIAL VIDEOS.
<< Back to Table of Contents
SCRATCH RESISTANT
METALLIC EPOXY SAMPLE KITS
CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO
<< Back to Table of Contents
CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO CLICK HERE TO WATCH VIDEO
DISPERSING EFFECTS
Designed to create unique effects in the epoxy
surface by mixing any of our metallic pigment with
91% or higher isoprophyl alcohol. Once sprayed
onto the surface of our epoxy it will disperse the
surface creating dynamic looks, colors and cells. Mix
ratio is 3 teaspoons of metallic powder to 15 fl oz of
isopropyl alcohol.
COUNTERTOP KITS OVER FORMICA
Applying our kits over Formica is simple. Using 60, 80, or 100 grit sandpaper, scuff up the
Formica including the edges and faces. Vacuum and wipe clean with Denatured Alcohol
and you’re ready to apply your kit.
ENDLESS TECHNIQUES
AND LOOKS
CUSTOMER INSTALLS
Base Coat: Pearl White Base Coat: Black Base Coat: Brass
Highlights: Black & Orange Gold Highlights: Pearl White & Purple Highlights: Turquoise
Base Coat: Pearl White Base Coat: Coffee
Highlights: Silver & Liquid Diamonds Highlights: Brass
CUSTOMER INSTALLS
Base Coat: Brass Base Coat: Pearl White Base Coat: Copper
Highlights: Black & Orange Gold Highlights: Silver Highlights: Black, Coffee & Silver
Base Coat: Pearl White
Highlights: Black & Titanium
QUARTZ
QUARTZ
M E TA L L I C S
COFFEE BLACK
Note: These colors are represented as closely as possible. They may differ slightly from
the finished installed product. Variations should be expected due to: thickness of application,
application method, color of primer, and amount of metallics used.
AS SEEN ON
Follow us on Pinterest! Like our Facebook Page! Follow us on Instagram! Follow us on Twit ter!