Beruflich Dokumente
Kultur Dokumente
2.Define Default Values for item status :-Set the default value for items in BOM.
IMG--Production--Basic data--Bill of materials--General data--BOM usage--Define
default values for the item status
Note :-When a new bill of material is created, the system checks the
material type as follows:� Non-generic entries are checked first. The generic
entries are checked afterwards.
4.BOM Status :-BOM status is used to define whether the BOM can be used by any
application area or not.BOM status defines whether The BOM is active or inactive.
IMG--Production--Basic data--Bill of materials-- General data--Define BOM status
5.This configuration setting enables to define item category. IMG--Production--
Basic data--Bill of materials-- Item data--Define item category
6.Define allowed material type for BOM items:
This configuration setting enables to control the item type which can be entered as
a component in the BOM.
Ex:--It is required to restrict FERT material to be the member of the BOM.
IMG--Production--Basic data--Bill of materials-- Item data--Define allowed material
type for BOM items
7.Define Explosion types:
IMG--Production--Basic data--Bill of materials--Item data--Define Explosion types.
9.Define Application:
This configuration setting enables to define BOM Application.BOM application
controls use of BOM in a specific area.
Areas like MRP run, cost estimate calculation etc.. will use the BOM of its own
respective BOM application.
IMG--Production--Basic data--Bill of materials--Alternative determination--Define
Applications
4.Define Parameters:
This configuration setting enables to define Parameter (activities) for
formula.Parameter is one of the required settings to calculate the conversion cost
incurred in the Work center during manufacturing.
IMG--Production--Basic data--Work center-- General Data --Standard Value--Define
Parameters.
Capacity Planning:--
Factory calendar will contain the entire working day and holiday details for a
specific plant.Factory calendar will be attached to the capacity header.Factory
calendar will be referred while scheduling the
operations.IMG--General settings -- Maintain Calendar
Note:-Factory calendar will be defined directly in the client. It will not be
captured and transported through Transport Management.