Sie sind auf Seite 1von 1

Batch Certification

D-70
BATCH # 7246D15
PRODUCT DESCRIPTION TYPE METHOD SENSITIVITY FORM CLASS APPROVAL
DATE
D-70 Nonaqueous Developer I & II A, B, C, & D 2* d&e NA 30-Apr-2015
We here by certify that this batch of inspection material when tested following manufacture met the following :
1 - AMS-2644F and is listed on the Qualified Products List QPL AMS-2644 (test reference: AFWAL/MLS 86-88)
2 - Is approved by the U. S. Air Force Materials Laboratory, including toxicity requirements for qualification to AMS-2644F.
3 - Is free of mercury contamination and was not made in any mercury bearing equipment.
4 - Is free of all known Ozone depleting substances.
5 - Does not contain Polychlorinated Biphenyl (PCB's)
6 - Is approved for use under AMS-2647-E, ASTM E-165/E165M-12 and ASTM E-1417/E1417M-13, ASTM E1418-10.
7 - Meets the requirements of ASME Boiler & Pressure Vessel Code 2015 Section V, Article 6, appendix II-¶ 641 & II-¶-642.
8 - Meets the requirements of NAVSEA 250-1500-1 ¶ 12.5.1.1.1, Rev 17.
9 - Meets the requirements of Mil-Std -2132 ¶ 7.1.3, and Mil-Std-271(SH) ¶5.6.1(93)
10 - Meets the requirements of Boeing BSS 7039.
11 - Meets the requirements of RCC-M edition 2000, Section V-F, sub-section F6423 ¶ 3.
12 - Meets the requirements of Velan PS-008, Rev. 10.
13 - Meets the requirements of Pratt & Whitney FPM PMC #4357-AE
14 - Meets the requirements of Rolls-Royce CSS 232, RRP 58003C (aerosol only)
15 - Meets the requirements for Snecma sensibilité S2, S3, & S4.
16 - Meets the requirements of ISO/FDIS 3452-2006, and EN 571-3*
17 - Meets the requirements of Flowserv
18- 10 CFR part 21 applies.
Warranty shelf life is 5 years from date of batch approval. PO#________________________
Batch number is on bulk labels or bottom of aerosol cans.

QUALITY ASSURANCE TESTS REQUIREMENTS BATCH


RESULTS
Appearance: Milky liquid, light white sediment, on standing PASS
Fluorescence: per AMS-2644F ¶ 3.3.10.2 Free of bright fluorescent specks. PASS
Removability: per AMS-2644F ¶3.3.10.4 Free of heavy developer film. PASS
Redispersibility: per AMS-2644F ¶ 3.3.10.5 Resuspends readily PASS
Solids Content: per ISO 3452-2:2006(E) ¶ 7.13 9.5 - 13.5 % 10.3%
Performance per ISO 3452-2:2006(E) ¶ 7.15 at 122˚F(50˚C)* Type 1= > 95% 10µ; Type II = > 75% 30µ PASS
Sulfur Content: per ASTM E-165/E165M-12 ¶ 9.1.2(D-1552 or D129/E516) ISO 3452: ≤ 200 ppm (0.02 %); PMC 4357: <1000 ppm ( 0.1%) 100 ppm
Chloride Content: ASTM E-165/E165M-12 ¶ 9.1.2(D-808 or Annex 4) ISO 3452:- ≤ 200 ppm (0.02 %); PMC 4357: < 1000 ppm (0.1%) 100 ppm
Fluoride Content: ASTM E-165/E165M-12 ¶ 9.1.2(D-808 or Annex 4) PMC 4357: ≤ 50 ppm (0.005 %) 21 ppm
Sodium Content: ASTM E-165/E165M-12 ¶ 9.1.2(D-808 or Annex 4) or MCL M-504 PMC 4357: ≤ 1000 ppm (0.02 %) 200 ppm
Total Halogen Content: ASTM E-165/E165M-12 ¶ 9.1.2(D-808 or Annex 4) ISO 3452: ≤ 200 ppm (0.02%); ASME PV&B sec 6 < 1% 121 ppm

Batch Tested By: Met-L-Chek Quality Assurance Batch Approved By:

Rick Valdez M. L. White


5/12/14

Met-L-Chek Company, 1639 Euclid Street, Santa Monica, California 90404, U.S.A
Phone: 310-450-1111 Fax: 310-452-4046 Email: info@met-l-chek.com Web: www.met-l-chek.com

Das könnte Ihnen auch gefallen