Beruflich Dokumente
Kultur Dokumente
Specifications
FILTER
HI-LEVEL REGULATOR
ALARM SERIES TYPE 73
1005P1
Body Pilot
ᔢ Process Connection ᔢ Type
2.00" NPT 3-way
SERIES1005P1 WITH PILOT
ᔢ Material ᔢ Connection
Carbon steel plated (std.) 0.125" NPT (female)
316 stainless steel (opt.) ᔢ Pressure gauge
ᔢ Pressure rating 0-30 psig (std.) 0-60 psig (opt.)
1500 psig Temperature Rating CONTROL VALVE
SERIES 2023
ᔢ Vent connection ᔢ 180° F (std.) 250° (opt.) 2027
0.25" NPT (female) LOW-LEVEL 2220
Specific Gravity (Min.) ALARM SERIES 2275
Float 1005P1 2720
ᔢ 0.60 (std.)
ᔢ Material Lower specific gravities,
316 stainless steel consult factory
ᔢ Pressure rating Typical
1500 psig Optional Items
ᔢ Float extension arms
separator/scrubber
Seals ᔢ Pipe adapter .125" M x .250" F installation
ᔢ Material (wetted) ᔢ Filter/regulators with gauges Note: A supply filter/regulator
Fluorocarbon (std.), nitrile (opt.) should be installed to provide
ᔢ 40 micron filter clean, dry air for proper
ᔢ Material (non-wetted) ᔢ External float chambers performance of switch.
Nitrile (Std.), fluorocarbon (opt.) Flow Coefficients (Cv)
Air ᔢ Block & bleed output 0.11
ᔢ Supply ᔢ Pilot output 0.28
Min. operating 15 psig ᔢ Pilot consumption 0.007
Max. operating 50 psi
Max. allowable 100 psi
ᔢ Connection
0.125" NPT (female)
Engineered
Performance
2 model Code
How to order
1. Specify Series 1005P1
2. Select Model Number
PiLot oPtion
1018 – V P
body mateRiaL Code Option
5.00 8.91
4.72
3.52
W/O EXTENSION
ARM
4.50 EXHAUST
.125 NPT
Series 1005P1 6.17
SUPPLY SUPPLY
Block and Bleed .125 NPT .125 NPT
1.75 4.11 52.24°
with Pilot, Model P
VENT
.250 NPT 2.00 NPT
8.91
4.72
2.89 SUPPLY 3.52
W/O EXTENSION
.125 NPT ARM
Series 1005P1
2.03
Block and Bleed,
Model O 3.72 1.75 4.11 52.24°
In Canada contact:
Engineered Performance
Tel: 713· 466·3552 Tel: (780) 434-8566
Fax: 713· 896·7386 Fax: (780) 434-4267
www.norriseal.com www.albertaoiltool.com
©2014 Dover Corporation/Norriseal and its affiliates. This manual, including all text and Due to the continuous improvement program at Norriseal, specifications and/or prices
images, is a copyrighted work of Dover Corporation/Norriseal and its affiliates. It may are subject to change without notice or obligation.
not be, in whole or in part, photocopied, scanned, or otherwise reproduced, revised,
or publicly displayed, without prior written permission from Norriseal. This manual is All trademarks contained herein are the property of their respective owners.
for use only with the new Norriseal valves and/or controllers listed in the manual. It
may not be distributed with, and is not for use with, any remanufactured products. 1005P1214T