Beruflich Dokumente
Kultur Dokumente
Summary
Setting units
Tools > Set Units
Setting Grid
View > Set Construction Grid
Selection tools
Select the closed space
Sweep tools
Sweep the body to create solid object
Make necessary changes on the shown values
Making a coil
On the project bar click on the body needed to be transformed into a coil > Model >
Make Simple Coil
Click Coil tab on the project bar > Change number of turns > Change the current in the
coil
Pre-solving
Solve > Set Solver Options > Change Polynomial Order to specified one
Solve > Set Adaptation Options > Check on h-adaptation > Set h-adaptation to specified
value > Set Tolerance
Solving
Solve > Static 2D
Post-Solving
The post processing bar appears
Click on the global values tab to get values of Force, Energy… etc.
Click Field on project bar > Choose the type of drawing (Contour, Shaded, Arrow) >
Choose field needed to be shown (e.g. Flux Function, |B| Smoothed) > Update View
Plotting Graph for Field Distributions
Show Field Distribution by the same method above > Tools > Field Line Graph > Set
the initial point and the end point using mouse or keyboard input bar
TAKE CARE:
When drawing air box "Ignore hole" MUST be checked
You MUST sweep all the bodies using the same model sweep
Using Keyboard input bar is optional but recommended
Drawing the Air box first guarantees accurate results
FAQ
Q: I solved the model but the global values I got aren't correct?
A: Repeat your model drawing the Air Box first.
Q: When I click solve I get a warning "The object "whatever" doesn't follow the model
sweep it will be ignored" and then I get values of zero?
A: Make sure you swept all the shapes in the model in the same way.