Beruflich Dokumente
Kultur Dokumente
CONTENTS
4.2 MAPS 28
4.3 NOTIFICATIONS 29
5 NEMO OPEN FILE FORMAT 30
6 NEMO PRODUCTS 31
7 CONTACT INFORMATION 32
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 2
This product description, as well as the software described in it, is furnished under license and
may only be used or copied in accordance with the terms of such license. The information in
this paper is intended for informational use only and is subject to change without notice. Anite
Finland Ltd. assumes no responsibility or liability for any errors or inaccuracies that may appear
in this material.
Except as permitted by such license, no part of this publication may be reproduced or
transmitted in any form or by any means, electronic, mechanical, recording, or otherwise,
without the prior written permission of Anite Finland Ltd.
Nemo Outdoor™, Nemo Analyze™, Nemo Handy™, and Nemo Q™ are trademarks of Anite
Finland Ltd.
Windows® 2000 and Windows® XP are registered trademarks of the Microsoft® Corporation and
MapInfo® and MapX® are registered trademarks of MapInfo® Corporation. DTI is a trademark of
PCTEL corporation.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 3
Nemo Outdoor
supports more
than 70 different
test terminals on
one common
software platform.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 4
• Support for Voice quality measurements with LG VX- 8xxx series cdma terminals
• Support for MNC/MCC/Cell ID/ LAC decoding with PCTel GSM scanners
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 5
o Option GlobeTrotter GT MAX 7.2 Ready HSDPA data card and Option GlobeTrotter
HSDPA 7.2 data card (GSM/GPRS/EDGE 850/900/1800/1900 UMTS/HSDPA
850/1900/2100)
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 6
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 7
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 8
The data measurement system has two modes: Send and Receive. In the Send mode, the
measurement unit sends data packets to the application server; in the Receive mode vice
versa. When an FTP server is used the measurement unit uploads (Send mode) or downloads
(Receive mode) test files to or from the FTP server. When an HTTP server is used the
measurement unit can only receive files.
In CS data measurements, the recorded parameters include:
• Number of requested and used timeslots
• Requested and used coding schemes
• Data call type (Non-transparent/Transparent)
• Resource upgrades/downgrades during handovers
• Transfer rate (every n second and average)
• Packet error rate
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 9
The data measurement system has two modes: Send and Receive. In the Send mode, the
measurement unit sends data packets to the application server; in the Receive mode vice
versa.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 10
Nemo Outdoor, with support for UMA, is an ideal solution for operators who test and verify how
subscribers can access and move seamlessly between mobile networks and WLANs.
Furthermore, not only can voice services be tested, but also all mobile services including email,
MMS, SMS, and other applications. At the moment Nemo Outdoor supports the Nokia 6136
UMA terminal. UMA parameters available include GAN State, WLAN Quality, QoS parameters,
AMR information, LLC data rate, and URR/ URLC signaling.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 11
DVB-H is a broadcasting network, so there is no return path. The first version is based on Nokia
N92, Samsung, and LG DVB-H terminals. DVB-H network operators are interesting in network
coverage, as DVB-H is driven by the power of the transmitter and performance of the receiver.
The cost of the network will be highly dependent on the performance of the receiver, in
particular its ability to recover a signal with a poor signal-to-noise ratio (SNR) and its robustness
against adjacent channel interference. Nemo Outdoor helps the operator optimize the network
by enabling the measuring of all key parameters of DVB-H broadcasting. Available parameters
include BER, FER, MFER (MPE-FEC frame error ratio) and RSSI.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 12
Frequency Scan mode is designed for basic frequency domain monitoring or spectrum analysis.
The scanning receiver can be used in variable bandwidth modes to check the existence of
wanted or unwanted radio signals in the defined frequency band. By using this mode, all the
user-selected carrier frequencies of the current wireless system and their field strength values
can be observed. In addition, if the Nemo Outdoor measurement system is equipped with a
GPS receiver, the position information is also stored by the system. Frequency scanning results
contain the field strength values for the carriers. The data collected can be used, for example,
for network planning and tuning and, furthermore, for interference measurements. Depending
on the cellular system technology, frequency scan mode also allows detection and
measurement of other important parameters such as BSIC, DVCC, and C/I values. The DTI
GSM scanner supports RXLEV and C/I measurements and BSIC decoding including MNC,
MCC, Cell ID and LAC information.
Pilot mode is designed for scrambling or spreading code domain analysis in WCDMA networks.
In this mode, Nemo Outdoor is able to measure and decode the Pilot signal scrambling codes
and their signal-to-noise ratios (Ec/No and Ec/Io values). In addition, the Primary and
Secondary Synchronization Channel Ec/No can be measured. Furthermore, Pilot Channel Time
of Arrival and Absolute Timing (referenced to GPS) can be observed. The complete RF signal
power (RSSI) can be measured as well as the signal code power (RSCP) for each individual
scrambling code.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 13
When performing measurements inside buildings, it is not practical to use a GPS receiver for
collecting location data. Therefore, the indoor measurement option offers a marker function that
can be used for plotting the measurement route on the map. With a Tablet PC the user can
place markers on the map with the click of a pen. It is also possible to import a bitmap image,
such as, a floorplan to be used as a map.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 14
Nemo Outdoor Multi is a multiple test mobile holder and a general measurement device adapter
to be used with Nemo Outdoor. Together with the Multi-Mobile Software Support option, it
allows simultaneous connection and the use of up to five test mobiles, multiple scanners, and a
GPS device. The test mobiles can be of different technologies. It is delivered in a heavy-duty
case or with a car mounting kit that allows the unit to be semi-permanently mounted into a test
vehicle.
Multi-Data allows up to five concurrent data measurements with a single laptop. It supports
circuit-switched and packet data connections, as well as simultaneous voice measurements and
different combinations of measurement modes or system technologies, such as, GSM, GPRS,
EDGE, WCDMA, HSDPA, and CDMA2000. Combined with Nemo Data Test Server, Nemo
Outdoor Multi-Data makes it easy to carry out, not only casual data benchmarking test cases
that can be used to compare the performance of different technologies or operators, but also
long-term network performance measurements.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 15
Nemo Outdoor enables network operators to test their network using the same application
protocols as their customers and, therefore, provides results that correspond with the end-user
experience. Nemo Outdoor supports, e-mail, SMS, MMS, WAP, and PoC testing, FTP and
HTTP file transfers, RTSP streaming, streaming video quality, voice quality measurements,
video call and video call quality measurements, and ICMP ping measurements. The information
provided by Nemo Outdoor assists in the verification and troubleshooting of new services
reducing the time-to-market.
All services are supported in a single product, Nemo Outdoor, providing an easy-to-use,
consistent interface for configuring the different application. Different applications, such as,
voice, SMS, and packet-switched data can be launched in one measurement session to
simulate end-user behavior.
For example, MMS testing allows you to monitor how multimedia messages are transferred in
the network. MMS messages can be sent manually and with scripts. In addition to successfully
sent/received MMS messages, also sending/receiving attempts and sending/receiving failures
are recorded enabling statistical success rate calculations. Nemo Outdoor measures total MMS
sending delay. Also separate delays from attach, PDP context activation, logging to MMSC, and
message sending/receiving are recorded.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 16
PoC (push-to-talk over cellular) is a real time one-to-one and one-to-many voice service over a
cellular packet-switched network (GPRS/EDGE supported currently). With Nemo Outdoor, SIP
signaling and RTP (STP) signaling is measured and messages can be decoded. Furthermore,
RTP (STP) speech frames can be measured and PTT state recorded. The test terminal
supported is the Nokia 6230i PoC-capable mobile.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 17
The supported mobiles for voice quality measurements are Nokia 6125, 6136, 6230i, 6255i,
6280, 6630, 6650, 6651, 6680, 7600, N80, LG VX8100 and LG VX8300.
The Nemo Voice Quality system setup consists of Nemo Outdoor, 1-2 mobiles, 1-2 audio
modules, and the Nemo multi rack.
In mobile-to-mobile measurements, one terminal is calling another and the mobiles send a test
sample in one or both directions. These measurements present the combination of the uplink
quality of the transmitting terminal and the downlink quality of the receiving terminal.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 18
Nemo Outdoor offers support for streaming video quality. Nemo Outdoor measures the quality
of the streaming video sound and picture in real time using five different parameters: audio
MOS (1-5), video MOS (1-5), jerkiness (0-100%), blockiness (0-100%), and blurriness (0-
100%). Furthermore, Nemo Outdoor saves the test video stream to a file for further analysis.
Nemo Outdoor uses the perceptual evaluation of video quality (PEVQ) measurement
technology provided under license from Genista. The Genista technology provides perceptual
metrics and a Mean Opinion Score (MOS) for streaming video quality based on properties of
human visual system, and audio quality based on human audition. All metrics work without
reference signals, allowing nonintrusive, in-service measurements.
Streaming video quality can be measured with all terminals that have data capabilities.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 19
Nemo Outdoor displays the missing neighbors in a bar graph and also some important network
parameters, such as, BCCH arfcn (channel), BSIC, RX level, difference to strongest, Ec/No, and
RSCP related to the missing neighbors.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 20
From the captured data it is possible to see, for example, the time between the first and last
packet, the number of packets sent, the average of packets sent per second, average packet
size, and delays.
Ethereal® is used by network professionals around the world for troubleshooting, analysis,
software and protocol development, and education. For further information please login to
www.ethereal.com, www.wireshark.org.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 21
Nemo Outdoor is delivered with the Nemo Export Wizard software. With the Nemo Export
Wizard software measurement data based on the Nemo file format can be converted easily to
different ASCII formats and opened, for example, with MapInfo Professional®. Exporting can be
made based on time or parameter.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 22
Configuring and using Nemo Outdoor has been designed to provide the utmost convenience to
a new user as well as to more experienced users. The automatic device detection functionality
in Nemo Outdoor, accessed both through the Welcome page and the menu bar, automatically
detects devices connected to the PC and assigns the appropriate, previously created COM port
and dial-up information to them. As a consequence, for example, reassignment of COM ports to
the devices will no longer cause confusion for the user. In addition, the user does not need to
spend time on manually going through the same procedure, saving valuable time and optimizing
the experience of easy and intuitive use of Nemo Outdoor.
You can do the same functions as previously, i.e. start the devices online ready for
measurements, or choose to start measurements offline. The refresh button serves as a quick
remedy in case of, say, accidentally lost data cable connection.
The automatic device detection functionality varies depending on the device vendor.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 23
The Nemo Outdoor user interface is compatible with common Windows® standards. During
measurement, users can easily monitor the results and the progress of the measurement
process. Through the Nemo Outdoor main window users will easily access all relevant
functions. After the initial device setups and configurations the user can save all device-related
settings to a hardware configuration file and load the same configuration later on.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 24
It is also possible to add parameters from the parameter tree to a data view with the convenient
drag and drop functionality.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 25
Nemo Outdoor offers several methods for viewing measurement results: line graphs are
suitable for viewing parameters for which historical (past) values need to be seen, such as
serving cell RSSI value, bar graphs work especially well with multiple parameters which need to
be compared with each other, e.g. RSSI levels for neighboring cells, scatter plot graphs are
ideal for observing correlations between two or more parameters, and delay profile graphs are a
special type of graph for viewing delay profile information from CDMA systems.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 26
Grids offer more detailed information on the measurement data. Events grids list, by default, all
measurement events, but the user can configure the view so that only events that are of special
interest are displayed. Parameters grids display selected network parameters. Statistics grids
list various statistics, such as the number of PDP context activation attempts, successes, and
failures from the measurement. Messages grids are used for observing layer 2 and 3,
RLC/MAC, and LLC messages. Table grids provide an easy way of simultaneously displaying
the same parameter values for multiple instances. For example, the neighbor list of a serving
cell can be displayed in a table grid so that each row represents one neighbor and each column
represents a parameter value (e.g., system, carrier, scrambling code, etc.).
In events and messages grids, the data can be analyzed even more in-depth by decoding the
individual events and messages simply by double-clicking the event in question. Event and
messages grids can also be color coded. Color coding can be done based on a certain
message, sub channel or decoded message.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 27
Furthermore, it is possible to copy grid data, such as, signaling, and export (paste) to MS Excel,
MS Word, etc. for further analysis. Signaling data can be copied in non-decoded or in decoded
format.
In addition, the user-defined parameters function offers more options for advanced users. A
user-defined string is searched in a decoded message, and the following value is returned. The
parameter can be displayed in info view and graph side panel.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 28
4.2 MAPS
When Nemo Outdoor is used with a GPS receiver and positioning coordinates are collected, the
measurement route is drawn on a map and the user can easily correlate events to location
coordinates.
Nemo Outdoor offers parameter-based route coloring. This means that users can observe the
values of certain network parameters from the route coloring on the map. Users can define
which color refers to which parameter value. This way it is easy to spot the problem areas on a
map. To make analysis even simpler, the same route can be drawn several times on the map
and different route coloring can be applied to each of them. Also certain events can be shown
as icons on the map.
Nemo Outdoor maps can also display a base station overlay. With a user-defined BTS file, the
map shows the location of each base station, the defined antennas with antenna directions, and
even antenna apertures and cell identifying parameters. During drive testing or playback, a line
connecting the current location to the serving and/or neighbor cell (sector) will be drawn
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 29
automatically (in CDMA systems, even multiple lines can be drawn to active sectors). This
provides a highly visual impression of the network operation. For example, it can be instantly
seen if a call is connected to a non-optimal cell.
Nemo Outdoor supports MapInfo® raster and vector maps. It also supports MapX Geoset files
(.gst) which enable the user to open several layers on a map and then save them all in a .gst file
to be opened later on. All user-defined map settings, such as, the order of the different map
layers and the zoom factor are stored in the .gst file.
For indoor measurements, you can import a floorplan and use that as a map. Nemo Outdoor
supports markers, which allows the user to easily correlate events to positioning coordinates.
The measurement route will be drawn on a map based on the user-defined markers. The route
can be colored based on parameter values and event notifications icons can be displayed on
the map.
4.3 NOTIFICATIONS
Nemo Outdoor can be configured to play audio notifications or voice prompts whenever a
certain event occurs. The voice prompts are Windows .wav files, and in Nemo Outdoor both
female and male default notification sounds are available. However, you can record and use
your own voice notifications instead of the default files as well. The voice prompts help you
during a drive testing to notice immediately when something special happens. Custom
notifications can also prove useful when creating a script file. For example, the user can set a
video call to start only when it is supported by a cellular technology.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 30
A detailed description of the file format is included in the product user documentation. The file
format description contains all recorded events and their parameters.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 31
6 NEMO PRODUCTS
In addition to the previously described product, Anite Finland Ltd. has a range of tools and
software that can be used for measuring and analyzing wireless networks.
Nemo Outdoor™ A portable engineering tool for measuring and monitoring the
air interface of TETRA, GSM (HSCSD, GPRS, EDGE),
WCDMA (UMTS), TDMA (IS-136), AMPS, cdmaOne, CDMA
2000, and UMA wireless networks.
- with Indoor Option Nemo Outdoor is ideal for indoor measurements. Lightweight
Tablet PC makes it is easy to carry and allows the user to plot
the measurement route on a floorplan with a click of a pen.
www.anite.com/nemo – nemo.sales@anite.com
NEM O O UT DOO R™ 4. 21 PRO DUCT DESCR IPT IO N 32
7 CONTACT INFORMATION
Global
Email nemo.sales@anite.com
Tel. +358 50 395 7736
Fax +358 8 551 6182
Address Anite Finland Ltd, Sepänkatu 20, 90100 Oulu, Finland
North America
Email nemo.sales@anite.com
Tel. +1 214 566 4972
Fax +1 972 929 9898
Address Anite Telecoms Inc., 8100 Jetstar Drive, Suite #100, Irving, TX 75063, USA
APAC
Email nemo.sales@anite.com
Tel. +65 9792 9003
Fax +65 6254 9885
Address Anite Singapore Pte. Ltd., 101 Thomson Road, #20-05 United Square,
Singapore 307591
P.R. China
Email nemo.sales@anite.com
Tel. +86 10 6787 0268-232
Fax +86 10 6788 9681
Address China Office (Beijing), 307A No.18 Hongda Northern Rd.
Beijing Economic and Technological Development Area, Beijing 100176, China
For information on other local representatives near you, please check the updated contact
information list at www.anite.com/nemo.
www.anite.com/nemo – nemo.sales@anite.com