Beruflich Dokumente
Kultur Dokumente
Hi All,
MOI PRO AMD firmware has updated to v2.0.0.4, added TBS open source support, improved the WebUI DVBlast scan
page, support DVBTand DVBC at the same time, you don't need to change the driver when you want to scan DVBC from
DVBT. And most importand, it supports our Multi tuner PCIe Card, like TBS6522, TBS6528,TBS6590.
MOIPro-AMD web update package v2.0.0.5:
1.Add capture card support, like TBS6301 HDMI capture card and ASI capture card.
2.Fixed some dvb-s2 transponder can not scan in web page.
3.Fixed web page load frontend issue.
4.Fixed dvblast do not choose the Ethernet issue.
5.Update tvheadend to latest version and add audio transcode support (eac3 to ac3)
6.Fixed some small bugs
If you are old customer of MOI PRO AMD, and want to use our new firmware v2.0.0.4, you can upgrade it yourself.
If you are using web page to update, please get it here:
https://sourceforge.net/projects/moiproamd/files/Release/moipro-amd-web-update-v2.0.0.1.zip/download
update guide check here:
http://www.tbsiptv.com/download/tbs2951/MOIPro-AMD_How_to_use_web_update.pdf
and please do not forget do these steps after update:
7. If you think that is complex you can direct reset to factory image :
https://sourceforge.net/projects/moiproamd/files/Release/moipro-amd-v2.0.0.1.zip/download
Guide :
http://www.tbsiptv.com/download/tbs2951/MOI_Pro_AMD_How_to_reset_to_factory_system-v2.pdf
the last steps is like this:
enter the following command to start reset the system.
$ sudo -s
# cd /lib/live/mount/medium/home/
# ./installdvb.sh
MOIPro-AMD has 2 LAN ports, it gets the IP address via DHCP by default, and it will display tuner
information, time, and IP address etc on LCD. All those information are not shown on LCD at the same
time, so you need to use arrow keys to see the information you need:
You will see information on LCD shown as below picture after MOI Pro-AMD is powered up:
Notes:
1) With LAN1 connected only, you will see “LAN1: xxx.xxx.x.xxLAN2: Disconnect” shown on LCD
2) With LAN2 connected only, you will see “LAN1: DisconnectLAN2: xxx.xxx.x.xx” shown on LCD
3) With LAN1 and LAN2 connected at the same time, you will see “LAN1: xxx.xxx.x.xxLAN2:
xxx.xxx.x.xx“ shown on LCD.
In most case, users can not get the channels lock, we found it because they connected their cable to the incorrect input.
So, it's important to distinguish them first then it will not cost your time to try one by one.
SSH remote and system login user name and password is root / 123456
Click "LAN1 Settings", select "DHCP", and then click "Save", then MOI Pro-AMD will receive a
dynamic IP address from the Ethernet server. Please check below picture for your reference:
You can also set "DHCP" to "STATIC" by selecting “STATIC”, and then enter data for IP Address, Subnet
Mask, Gate Way and DNS Server, then click “Save”, and then "STATIC" will be set successfully. Please
check below picture for your reference:
dynamic IP address from the Ethernet server. Please check below picture for your reference:
You can also set "DHCP" to "STATIC", the method is the same with "LAN1 Settings". Please check below
picture for your reference:
1. If you use None, Tvheadend, VDR and Dvblast will not run
2. If you use Tvheadend, it will enter Tvheadend web page after a few seconds
3. If you use VDR, please select the TV Adapter (tuner) and scan first, after the scan is
4. If you use Dvblast, please select the TV Adapter (tuner) and scan first, after the
In this page, we have improved to a completely new scan page, support DVBT and DVBC and multi tuner PCIe card,
you don't need to change the driver compared old firmware, more convenient.
Select "TBS 6905 DVBS/S2 adapter 0", and configure all the parameters like below picture
(similarly, you can click "adapter 1, adapter 2, adapter3…"):
By clicking "Scan Channels" and waiting about 10 seconds if scan success,you will see a channel list.
Under drop-down menu of IP, there have 3 options: auto, 192.168.8.25, and 192.168.8.80, you can
choose one from those 3 options:
1) Choose "auto" means it will stream to 192.168.8.25 (LAN1) or 192.168.8.80 (LAN2) at random
2) Choose 192.168.8.25 means it will stream from LAN1
3) Choose 192.168.8.80 means it will stream from LAN2
You can select UDP as your own preference, take program CCTV NEWS for example, if you check UDP, then
the stream coming out is UDP, and the address is udp://@239.255.0.2:1234, and if you uncheck UDP,
then the stream coming out is RTP, so the address now is rtp://239.255.0.2:1234.
Notes: If you need to stream and save the programs, you need to check"Enable", and then check
"Streaming&Save", and then the selected programs will be streamed and saved.
1) OSCAM Settings
You can see a drop-down menu shows 8 options from "TBS 6910 DVBS/S2+2xCI adapter 0" to "TBS 6909
DVBS/S2 adapter 8" (Tips: Here we use three TBS6904 card for test, if you use our other TBS cards, it
will show different options)
Choose one option and do “DiSEqC settings” and “Scan settings“as following:
For this firmware version 2.0.0.4, we have add capture cards support. For example, out tbs6301 HDMI
Capture card and tbs690A ASI capture card.
You can install these capture cards to our Moi Pro Amd server to collect more kinds of media source
for your IPTV system, except traditonal signal like DVBS/S2, DVBT/T2, DVBC, ATSC.
Update:
1) Download the web update package from http://www.tbsdtv.com/download/ page, unpack the zip
file ,Select file “update.tar.bz2” from your PC.
This is a page show you how to configure Tvheadend for DVB tuner ,more detail steps you can check
here:
https://www.youtube.com/watch?v=8YAnJtHrTWw&feature=youtu.be
Best Regards,
Email: support@tbsdtv.com
Website: www.tbsdtv.com
---17 / 17---
MOI Pro –AMDGet Started Guide V1.0.0.6