Beruflich Dokumente
Kultur Dokumente
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Serial
IP-Address : --
Login Time : 2019-12-19 16:45:17+08:00
Logout Time : 2019-12-19 17:13:42+08:00
-----------------------------------------------------------------------------
! SECURITY MINOR 2019-12-19 17:14:02+08:00
EVENT NAME :The managing user of the equipment logout or logon
PARAMETERS :User name: root, Log mode: Serial, IP: --, State: Log on
-----------------------------------------------------------------------------
All user fail login information:
-----------------------------------------------------------------------------
QCY_051_HYB_01>
Access Type IP-Address Time Login Times
-----------------------------------------------------------------------------
Serial -- 2019-12-19 17:13:58+08:00 1
-----------------------------------------------------------------------------
QCY_051_HYB_01>
Warning: Using the default user password is not recommended. Please change the
password.
QCY_051_HYB_01>enable
QCY_051_HYB_01#config
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#display board 0
-------------------------------------------------------------------------
SlotID BoardName Status SubType0 SubType1 Online/Offline
-------------------------------------------------------------------------
0 H805GPFD Normal
1 H80DSDPM Normal
2
3
4
5
6 H801SCUK Standby_normal
7 H801SCUK Active_normal
8 H802X2CS Normal
9 H802X2CS Normal
10 H801PRTE Normal
11 H801PRTE Normal
12
-------------------------------------------------------------------------
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#display current-configuration
{ <cr>|ont<K>|port<K>|section<K>|service-port<K>|simple<K>||<K> }:
Command:
display current-configuration
[Active: H801SCUK; Standby: H801SCUK]
[Patch Info: SPH206 HP2013]
[MA5600V800R018: 8510]
#
[sysmode]
<sysmode>
switch adsl mode to rfc2662 vdsl mode to tr165
xpon mode switch-to profile-mode
voice-spec set vag-num 8
protocol support h248
system ex-mode backup
system workscene msan
router mode basic
#
[global-config]
<global-config>
sysname QCY_051_HYB_01
undo system snmp-user password security
terminal user name buildrun_new_password root *J$1a$im0QMoc8I#$9P2H-4LX6On[lFV!
KYw=tBC/$KE-P$Q+P/;`]ixF$* 7 0000:00:00:00:00:00 0000:00:00:00:00:00 root 1
first-login-info 0 "-----"
xdsl data-rate-profile quickadd 100 maximum-bit-error-ratio 3 path-mode 2 rate 32
32 500000 32 0 0 4000 0 g.998.4-rtx etr-min 32 etr-max 500000 ndr-max 500000
min-sos-br 8 desc 35B_data_rate_300Mb
xdsl data-rate-profile quickadd 101 maximum-bit-error-ratio 3 path-mode 2 rate 32
32 200000 32 0 0 4000 0 g.998.4-rtx etr-min 32 etr-max 200000 ndr-max 200000 min-
sos-br 8 desc 35B_data_rate_200Mb
xdsl data-rate-profile quickadd 102 maximum-bit-error-ratio 3 path-mode 2 rate 32
32 100000 32 0 0 4000 0 g.998.4-rtx etr-min 32 etr-max 100000 ndr-max 100000 min-
sos-br 8 desc 35B_data_rate_100Mb
xdsl data-rate-profile quickadd 103 maximum-bit-error-ratio 3 path-mode 2 rate 32
32 50000 32 0 0 4000 0 g.998.4-rtx etr-min 32 etr-max 50000 ndr-max 50000
min-sos-br 8 desc 35B_data_rate_50Mb
xdsl upbo-profile quickadd 100 force-electrical-length-us auto 4 upbo-parameter
4450 2930 4550 1660 4000 0 4000 0 upboboostmode 2 237 118 0 0 aelemode 0
upboelmt 10 desc 35b_UPBO
xdsl dpbo-profile quickadd 100 working-mode 7 eside-electrical-length 54 54
eside-cable-model 270 490 256 min-usable-signal 224 span-frequency 64 511
dpbo-calculation 2 desc 35b_DPBO
xdsl dpbo-profile quickmodify 100 assumed-exchange-psd enable 64:73,256:73,
314:84,376:93,511:96
xdsl noise-margin-profile quickadd 100 snr-margin 60 0 310 60 0 310 rate-adapt 2 2
snr-mode disable disable desc 35b_NoiseMargin
xdsl inp-delay-profile quickadd 100 inp-4.3125khz 4 4 inp-8.625khz 1 1
interleaved-delay 8 8 delay-variation 255 channel-policy 0 mdosplit 255 desc
35b_INP-Delay
xdsl mode-specific-psd-profile quickadd 100 nominal-transmit-PSD-ds 400
nominal-transmit-PSD-us 380 aggregate-transmit-power-ds 170
aggregate-transmit-power-us 145 aggregate-receive-power-us 380
xdsl mode-specific-psd-profile quickmodify 100 upstream-psd-mask-selection 1
description 35B_SPC_PSD
xdsl mode-specific-psd-profile quickmodify 100 psd-class-mask 9 psd-limit-mask 66
psd-limit-mask-u0used 66 enable
xdsl line-spectrum-profile quickadd 100 l0-time 255 l2-time 30 l3-time 255
max-transmite-power-reduction 3 total-max-power-reduction 9 bit-swap-ds 2
bit-swap-us 2 overhead-datarate-us 4000 overhead-datarate-ds 4000
xdsl line-spectrum-profile quickmodify 100 allow-transitions-to-idle 2
allow-transitions-to-lowpower 2 reference-clock freeRun cyclic-extension-flag 1
force-inp-ds 1 force-inp-us 1 desc 35B_SPECTRUM
xdsl line-spectrum-profile quickmodify 100 g.993.2-profile 9 mode-specific
enable 1 100
xdsl line-spectrum-profile quickmodify 100 g.993.2-profile 9 us0-psd-mask 1
xdsl line-spectrum-profile quickmodify 100 transmode 1
xdsl line-spectrum-profile quickmodify 100 g.998.4-rtx-mode 1 1 leftr-thresh 78 78
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
---------------------------------------
Board Name : H802X2CS
Board Status : Normal
---------------------------------------
------------------------------------------------------------------------------
Power Status Power-off cause Power-off Time
------------------------------------------------------------------------------
POWER-ON - -
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Port Port Optic Native MDI Speed Duplex Flow- Active Link
Type Status VLAN (Mbps) Ctrl State
------------------------------------------------------------------------------
0 10GE normal 1 - 10000 full off active offline
1 10GE normal 1 - 10000 full off active offline
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Port Detecting Time(Min) TX State Resume Detect Resume Auto-sensing
Detect Interval Duration
------------------------------------------------------------------------------
0 - - - - - -
1 - - - - - -
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Port 15Min 15Min 24Hour 24Hour
AlmProf WarnProf AlmProf WarnProf
------------------------------------------------------------------------------
0 - - - -
1 - - - -
------------------------------------------------------------------------------
Note: For any port, setting MDI to auto-negotiation is invalid, For a 1000 M
Electrical port in the full-duplex mode, setting MDI to any value is
invalid
---------------------------------------
Board Name : H802X2CS
Board Status : Normal
---------------------------------------
------------------------------------------------------------------------------
Power Status Power-off cause Power-off Time
------------------------------------------------------------------------------
POWER-ON - -
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Port Port Optic Native MDI Speed Duplex Flow- Active Link
Type Status VLAN (Mbps) Ctrl State
------------------------------------------------------------------------------
0 10GE normal 1 - 10000 full off active offline
1 10GE normal 1 - 10000 full off active offline
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Port Detecting Time(Min) TX State Resume Detect Resume Auto-sensing
Detect Interval Duration
------------------------------------------------------------------------------
0 - - - - - -
1 - - - - - -
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Port 15Min 15Min 24Hour 24Hour
AlmProf WarnProf AlmProf WarnProf
------------------------------------------------------------------------------
0 - - - -
1 - - - -
------------------------------------------------------------------------------
Note: For any port, setting MDI to auto-negotiation is invalid, For a 1000 M
Electrical port in the full-duplex mode, setting MDI to any value is
invalid
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#display vlan all
{ <cr>|vlanattr<K>|vlantype<E><mux,standard,smart,super> }:
Command:
display vlan all
-----------------------------------------------------------------------
VLAN Type Attribute STND-Port NUM SERV-Port NUM VLAN-Con NUM
-----------------------------------------------------------------------
1 smart common 8 0 -
1496 smart common 4 0 -
1497 smart common 4 64 -
1498 smart common 4 64 -
-----------------------------------------------------------------------
Total: 4
Note : STND-Port--standard port, SERV-Port--service virtual port,
VLAN-Con--vlan-connect
QCY_051_HYB_01(config)#display version
{ <cr>|backplane<K>|frameid/slotid<S><Length 1-15> }:
Command:
display version
VERSION : MA5600V800R018C10
PATCH : SPH206 HP2013
PRODUCT : MA5603T
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
Main CPU :
APP Version: 616(2018-9-20)
BIOS Version: (U12)211
Main CPU :
APP Version: 616(2018-9-20)
BIOS Version: (U12)211
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#display version 0/12
Failure: Board does not exist
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#display language
Local:
Description: CHINESE SIMPLIFIED (DEFAULT LANGUAGE)
Version: MA5600V800R018C10
Encoding: GBK
General:
Description: ENGLISH (DEFAULT LANGUAGE)
Version: MA5600V800R018C10
Encoding: ANSI
Command:
display interface vlanif
vlanif1496 current state : DOWN
Line protocol current state : DOWN
Description : HUAWEI, SmartAX Series, vlanif1496 Interface
The Maximum Transmit Unit is 1500 bytes
Forward plane MTU: -
Internet Address is 10.168.49.70/28
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is a849-4d31-8f9f
VLAN Encap-mode : single-tag
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#
QCY_051_HYB_01(config)#quit
QCY_051_HYB_01#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:
QCY_051_HYB_01#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
QCY_051_HYB_01#
>>User name: