Beruflich Dokumente
Kultur Dokumente
* V2.8.0 - 01-September-2015
===============================
New Features
************
+ Adding support of STM32L4x6xx devices
+ Adding support of STM32L0xx 192K of flash devices
+ Adding support of STM32F74x/5x devices
+ Adding support of STM32F412xx/F410xx/F446xx/F469xx/F479xx devices
+ Adding support of STM32F303/302xD/E devices
+ Fix com port up to 255
+ Fix GUI/command line version supporting .bin at an address offset different
from base address
+ Fix STUARTBLLIB.dll to support non-aligned address at end of flash area.
But data should be always multiple of 4 bytes.
Known Limitations
*****************
+ Options Bytes management of STM8, STM32L1/L0/L4 and STM32F0/2/3/4/7 devices
is supported only in Command line version
for batch programming,
+ Automatic selection of some STM8 devices may not work properly. If required,
use
command line version with batch files customization,
+ on Some STM32 MCus Write protection of last pages which is controlled by the
last protection bit7
in WPR3 options byte is working properly but the Graphical view of check
boxes may not updated
accordingly on some devices with large size greater than 128Kbytes.
To enable/disable the write protection of last pages, you can check/uncheck
only the first
page of this group of pages on the graphical view.
+ STM32L "Erase all" feature is not supported. See AN2606 for more details.
* V2.7.0 - 15-September-2014
===========================
New Features
************
+ Adding support of New STM32F0xx/STM32F3xx/STM32F4xx/STM32L1xx/STM32L0xx/
devices
+ Project Source files upgraded to Visual Studio 2013
Known Limitations
*****************
+ Options Bytes management of STM8, STM32L1/L0 and STM32F0/2/3/4 devices is
supported only in Command line version
for batch programming,
+ Automatic selection of some STM8 devices may not work properly. If required,
use
command line version with batch files customization,
+ on Some STM32 MCus Write protection of last pages which is controlled by the
last protection bit7
in WPR3 options byte is working properly but the Graphical view of check
boxes may not updated
accordingly on some devices with large size greater than 128Kbytes.
To enable/disable the write protection of last pages, you can check/uncheck
only the first
page of this group of pages on the graphical view.
+ STM32L "Erase all" feature is not supported. See AN2606 for more details.
* V2.6.0 - 07-November-2012
===========================
New Features
************
+ Adding support of STM32F3xx devices
+ Adding support of STM32F0xx devices
+ Add options bytes data for STM32L devices
Known Limitations
*****************
+ Options Bytes management of STM8, STM32L1 and STM32F0/2/3/4 devices is
supported only in Command line version
for batch programming,
+ Automatic selection of some STM8 devices may not work properly. If required,
use
command line version with batch files customization,
+ STM32F1xx Write protection of last pages which is controlled by the last
protection bit7
in WPR3 options byte is working properly but the Graphical view of check
boxes may not updated
accordingly on some devices with large size greater than 128Kbytes.
To enable/disable the write protection of last pages, you can check/uncheck
only the first
page of this group of pages on the graphical view.
+ STM32L "Erase all" feature is not supported. See AN2606 for more details.
* V2.5.0 - 25-November-2011
===========================
New Features
************
Enhancements
************
+ Fix of "Select all" pages erase for STM32L1xx devices when using GUI demo
(Selection mode)
+ Add EEPROM data for STM32L devices
+ Fix of RTS and DTR Outputs control in Command line version
+ Add of batch files for STM32F2/F4 MB786 revB ST evaluation board for
automatic update
+ Fix of writing extra bytes at end of flash pages
+ Fix Flow control from the GUI (removed) and enhanced only in command line
version
Known Limitations
*****************
+ Options Bytes management of STM8, STM32L1 and STM32F2 devices is supported
only in Command line version
for batch programming,
+ Automatic selection of some STM8 devices may not work properly. If required,
use
command line version with batch files customization,
+ STM32F1xx Write protection of last pages which is controlled by the last
protection bit7
in WPR3 options byte is working properly but the Graphical view of check
boxes may not updated
accordingly on some devices with large size greater than 128Kbytes.
To enable/disable the write protection of last pages, you can check/uncheck
only the first
page of this group of pages on the graphical view.
+ STM32L "Erase all" feature is not supported. See AN2606 for more details.
* V2.4.0 - 07/18/2011
=====================
New Features
************
+ Adding support of STM32F1xx High density Value line devices
+ Adding support of STM32L1xx devices
+ Adding support of STM32F2xx devices
+ Adding Flow control in the GUI for RTS and DTR management
Known Limitations
*****************
+ Options Bytes management of STM8, STM32L1 and STM32F2 devices is supported
only in Command line version
for batch programming,
+ Automatic selection of some STM8 devices may not work properly. If required,
use
command line version with batch files customization,
+ STM32F1xx Write protection of last pages which is controlled by the last
protection bit7
in WPR3 options byte is working properly but the Graphical view of check
boxes may not updated
accordingly on some devices with large size greater than 128Kbytes.
To enable/disable the write protection of last pages, you can check/uncheck
only the first
page of this group of pages on the graphical view.
Enhancements
************
+ Update of 'STUARTBLLIB.dll' v2.2.2 :
- Fix of sending extra random byte at the end if sending non-aligned data for
STM32
- Fix of Erase of pages/sectors less then 10.
* V2.2.0 - 05/03/2010
=====================
New Features
************
+ Adding support of STM32F1xx Value line and XL density devices
+ Adding support of new STM8L devices
Enhancements
************
+ Fix of "removes FFs data" when using GUI demo or Command line utility
+ Fix of sending extra "0xFF" or a random byte at the end of flash if sending
odd data
+ Fix of RTS and DTR Outputs control in Command line version
+ Fix of special Echo modes for LIN emulation over UART for STM8 while using a
tranceiver
Known Limitations
*****************
+ Automatic selection of some STM8 devices may not work properly. If required,
use
command line version with batch files customization.
+ STM32F1xx Write protection of last pages which is controlled by the last
protection bit7
in WPR3 options byte is working properly but the Graphical view of check
boxes may not updated
accordingly on some devices with large size greater than 128Kbytes.
To enable/disable the write protection of last pages, you can check/uncheck
only the first
page of this group of pages on the graphical view.
* V2.1.0 - 11/02/2009
=====================
New Features
************
+ Adding New STM8 map files with options bytes support,
+ Adding "Echo" mode option in UART communication for LIN emulation over UART
for STM8
+ Adding a new combox with "No erase" option when downlading a file.
Enhancements
************
+ Fix of COM ports number > 9 using when using some USB-to-Serial commercial
bridges,
+ Fix of --o option (removes FFs data) when using Command line utility,
+ Fix of GUI map files selection in some particular cases,
+ Fix of refresh of the window values after reading Options Bytes,
+ Removing "Stop Bits" combox in the GUI first Window,
+ Removing CAN selection over the COMBox bridge board,
+ Removing DFU Selection for the GUI; To use DFU bootloader refer to DFuSe
Software,
+ Minor enhancemenst for dialog box messages and comments for the GUI and
Command Line versions.
Known Limitations
*****************
+ Automatic selection of some STM8 devices may not work properly. If required,
use
command line version with batch files customization.
* V2.0.0 - 07/03/2009
=====================
New Features
************
+ Adding STM32 connectivity line and STM8 devices
+ Adding CAN communication for connectivity line devices over COMBox bridge
+ Adding Access to DfuSe Demo (the DfuSe Demo should be installed on your
machine)
* V1.3.0 - 03/05/2009
=====================
Enhancements
************
+ Allow device selection in the flash loader GUI for non programmed flash size
devices
+ Add Visual studio 2005 workspace template under INSTALLDIR\src directory
* V1.2.0 - 10/23/2008
=====================
New Features
************
Enhancements
************
* V1.1.1 - 06/16/2008
=====================
* V1.1.0 - 06/02/2008
===================
New Features
************
+ Save the last used file names for upload and download operations
+ Add Option bytes upgrade thru files option to the download operation
Enhancements
************
+ Fix a minor issue of format with the Upload operation in a binary file
+ Fix a minor issue with erase command status update
+ Fix an issue of Download, Upload and erase operations with an image size
(>32k)
* V1.0.0 - 10/25/2007
====================
Created.