Beruflich Dokumente
Kultur Dokumente
LOADER
Page 1 of 4
INSTRUMENTATION OPERATOR ENVIRONMENT cylinders
Indicators ROPS/FOPS level 1 canopy w/side screens Lift cylinder –
Digital Hourmeter Tilt ROPS/FOPS Bore diameter 2.5 in (63.5 mm)
Fuel level LCD bar graph with alarm Rear window w/ emergency escape Rod diameter 1.75 in (44.5 mm)
Warning lights with alarms Stroke 32.2 in (817.9 mm)
Instrument panels
Engine coolant temperature Closed length 45.6 in (1158 mm)
Suspension vinyl seat
Engine oil pressure Bucket cylinders –
2 in (51 mm) retractable seat belt
Engine Malfunction Bore diameter 3.0 in (76.2 mm)
Hydraulic charge pressure Hand throttle Rod diameter 1.5 in (38.1 mm)
Hydraulic filter restriction Foot throttle Stroke 16.14 in (410.0 mm)
Hydraulic oil temperature Alarm package Closed length 24 in (610.0 mm)
Warning alarms Headliner
Battery voltage (plus display) Top window Weights
Indicator light Cup holder
Operating weight 9,600 lb (4355 kg)
Engine preheat Power plug socket
Parking brake Shipping weight 9,265 lb (4200 kg)
Foot rest
Seat bar reminder Add-on weights –
Storage tray
Side cab glass 46.9 lb (21.3 kg)
Low effort ergonomic hand controls Lexan door 74 lb (33.6 kg)
ELECTRICAL SYSTEM Padded seat bar w/integral armrests Glass door with wiper 134 lb (60.8 kg)
Alternator 95 amp Loader control lockout system Suspension seat 22.1 lb (10 kg)
Starter 4.0 kW Electric parking brake control
Battery Floor cleanout panel Service Capacities
12-volt low-maintenance 1000 cold-cranking Fuel tank 25.5 gal (96.5 L )
amps @ 0° F (-18° C)
Engine oil with filter 10.5 qt (9.5 L )
Hydraulic system –
Reservoir 5.9 gal (22.4 L)
Total 11.75 gal (44.5 L)
TRACK SELECTION
Width to
Area Ground pressure Outside of track
sq in (cm2) psi (kPa) in (m)
15.7 in (400 mm) 2,038 (13 120) 4.8 (33) 74 (1.88)
17.7 in (450 mm) 2,293 (13 776) 4.3 (29.7) 76 (1.93)
TR320 • Page 2 of 4
Dimensions
TR320 • Page 3 of 4
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices,
where applicable.
NOTE: All engines meet current EPA emissions requirements.
IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without
notice and without incurring any obligation relating to such change. Case Construction Equipment Inc.
does not warrant the safety or reliability of attachments from other manufacturers.
Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association
with goods and/or services of companies other than CNH America LLC, are the property of those
respective companies. www.casece.com