Beruflich Dokumente
Kultur Dokumente
07
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
VF7000 Series
User Manual
1
Color Black
External : 5.25" x 1
Drive Bays
Internal : 3.5"x
x3
Expansion Slots 7
2
3
Remove the screw as shown picture then take off the rod
3 4
Release the screw of 3.5" cage Remove outward the 3.5" cage
5
6 7
There are 3 springs in the front Push and release the 3 springs
doors, push to release it. of front door
8 9
After loosing the spring of Insert the device into the 1st
front door, pull out it as arrow 5.25" drive bay
shows.
4
5
10
11 12
13 14
Secure the HDD cage with After finish 5.25" device installation,
the screw as shown. push the front door back.
15
Notice: For correct operating 5.25" drive
bay, insert the 5.25" device into the 2nd
or 3rd bay is not recommended.
2 3
Slide the HDD into the cage as Squeeze and push in-ward
shown and move it to the desired the tool-free clip
location.
6
7
1 2
Open the PCI tool-free bar then Pull out the plastic clips of PCI slots
turn it clockwise
3 4
Remove the PCI slot as shown Install the tuner card then pull
back the plastic clips of PCI slots
Placement Direction:
When installing the motherboard, make sure you follow the direction
provided by your motherboard manufacturer. On most standard
motherboards, the edge with external ports goes to the rear part of
the chassis. It is highly recommended that you install CPU, heat
sink and modular components before fixing the motherboard inside
the chassis.
= the locations of
the screw holes. Note
these locations and
place included
This side towards
standoffs on the chassis
the rear of the
first.
chassis
8
3.3 USB2.0 & IEEE1394 Firewire connection
USB connection
Please consult your motherboard manual to find
out the section of "USB connection".
USB2.0
Brank)
GND1 GND2
Data+1 Data+2
Data-1 Data-2
Vcc1 Vcc 2
10
11
IEEE1394a
TPA+ TPA
VG Brank)
TPB+ TPB
VP Brank)
GND
3.4 Audio connection
Please refer to the following illustration of Audio
connector and your motherboard user manual.
Please select the motherboard which used AC'97 or HD
Audio (Azalia), (be aware of that your audio supports AC'97
or HD Audio (Azalia)) or it will damage your device(s).
On some motherboards, the connectors for Audio are not
the same as the drawing below. Please check with your
motherboard manual before installing.
12
13
Black Wire
White Wire
2
Chapter4 Front Buttons Instruction
4.1 Media LAB Hot keys Module
function instruction (Optional)
DH Series supports the latest VFD kit. The VFD not only supports the latest
multimedia functions, it also supports a set of Hot Keys function. The simple
design will allow users to control the system simply through a touch on the
front panel.
Esc button
This is used to go backward on iMEDIAN or MCE
Direction button
This is arrow key to move up/down/left/right
Star Button
This is the same as the windows icon key on the keyboard
Menu button
This is same as the menu button of the Media LAB remote control
Enter Button
This is used to enter the function that you choose
14
15
16
17
1) S/W Installation
Insert 'Media LAB Application CD' to your CD ROM, and install
Media LAB software and Multi-Median according to the auto
running S/W installation process.
18
19
After all the connection finished, turn on your system. You may see
the 'Found New H/W Wizard' when Windows starts. Assign the CD
ROM drive for searching H/W driver.
CD/DVD/Removable HDD
You can enjoy the media files on the CD,
DVD and Removable Disk Drive.
Webcasting
You can enjoy the internet radio stations that we prepared
and also you can edit the list of internet radio/TV stations using
Webcasting station editor.
TV
Assign the TV device using the setting of iMEDIAN.
You need to select the audio/video device from the list.
Settings
You can change and adjust all the settings
of iMEDIAN by settings menu.
20
21
Running iMEDIAN
Navigation of iMEDIAN
You can control and navigate iMEDIAN using buttons or PAD on the remote control.
Please refer to the button usage of remote control for navigation below.
PAD Controller
'PAD Controller' is used as like 4 way Arrow Keys Control in the
iMEDIAN. You can move the focus of the object of the iMEDIAN.
Enter button
'ENTER' button is used to go to the next view of iMEDIAN.
1. Automatic Fan Speed Control: All power supply can detect the inside
heat and automatically adjust the fan speed to provide adequate airflow.
2. Ultra Silent: Ball bearing fans with high reliability 140mm or 120mm
cooling fan and super low acoustic noise under all load condition.
3. Modularized Cable Management: To eliminate clutter and improve
airflow inside the case.
4. Dedicated Graphic Card Power: reduce the loading on current PSU and
no need to upgrade current PSU while running multi graphic cards mode.
The functions can assure all Thermaltake Power Supply meets the balance in
noise control and heat exhausted. All power supply provides complete protection
function as follow:
1. Over power protection.
2. Short circuit protection on all output.
3. Over voltage protection / Under voltage protection.
4. Over current protection.
5. Over temperature protection.
Besides, Thermaltake enables the quality assurance of all power supply: 100%
Hi-POT and ATE Function Test, 100% Burn-In and AC Input cycled on/off under
high temperature condition. Furthermore, it has been approved by UL, CUL, TUV,
CB, FCC, CE, and BSMI.
There are three main products line of Thermaltake PSU which divided into
Toughpower, Purepower (include Purepower RX) and TR2 (include TR2 RX)
series. Please refer to
http://www.thermaltake.com/product/Power/power_index.asp
22