Beruflich Dokumente
Kultur Dokumente
intelligent
fire alarm
panel
features introduction
• certified to EN54 parts The NOTIFIER ID3000 intelligent fire A full range of intelligent sensors,
2 and 4 alarm panel offers a technically advanced detection products, input and
sophisticated range of facilities and output devices, repeaters, mimic
• expandable from 2 to 8 functions whilst remaining easy to drivers, printers and other peripherals
loop capacity install, program and operate. Modern complement the ID3000 to bring you the
styling and a variety of aesthetic most complete and versatile fire alarm
• up to 198 devices per loop options are sure to win over facility system in the market place.
(99 sensor and 99 modules) owners and architects. It has been 3rd
party certified to the current EN54 The ID3000 panels can be networked
standards part 2 and 4. together either as a true peer to peer
• 255 fire zones per panel
network or in a Master / Slave network,
Advanced design and manufacturing extending the total capacity of the
• modular design
techniques coupled with NOTIFIER’s 50 system to fit the largest applications.
plus years of experience at the forefront
• supports NOTIFIER’S of the fire industry, ensure that the The ID3000 is designed in a modular
advanced detection ID3000 sets new standards in many areas fashion to allow for a wide range of
such as: such as product functionality, flexibility, applications, facilitating installation and
user friendliness and reliability; in short servicing whilst making the ID3000 very
• VIEW™ everything you expect from the world easy to tailor to the requirements of
leaders in modern life safety systems. the application. The large LCD graphic
• OptiPlex provides easy to read and understand
messages complying with the EN54
• HARSH™ standard for primary user interfaces.
• HAZARD™
• 9 levels of sensitivity
• “Autolearn” facility
• network option
• Master/Slave
• degraded mode of
operation
• variety of mounting
options
The ID2net (Intelligent Digital Delivery ultra high speed of the ID2net, the network
nodes, with up to 32 networked ID3000
Network) from NOTIFIER is truly a appears to be invisible. A very large
eight loop fire alarm panels. This provides
quantum leap in fire networking network has the feel of one single fire
an astounding system capacity of 50,688
technology. It has been developed to panel. Complex CBE (Control by Event)
addressable points, (25,344 smoke
exceed international requirements and to configured and integral to each attached
detectors, 25,344 input and/or output
set new industry standards in the areas of fire panel, can travel across the network
modules and/or loop powered sounders),
speed, reliability, robustness and flexibility. at speeds so high they allow multiple
8160 network zones, and up to 170 km of decisions by multiple panels in the blink of
ID2net the network of tomorrow, today.
network cabling. Furthermore, the ID2net an eye. This opens tremendous possibilities
supports fibre optics; simply connect the in varied real world applications never
The ID2net functions without burdening
NOTIFIER fibre optic card to the network before thought possible. In the event of
the attached fire panel and peripherals.
gateway module and a mixture of wire multiple network faults, as with an open
In fact, since the attached fire panels
are removed from all networking cable and fibre optic cable can be applied or short circuit between nodes, “mini
responsibilities, they perform faster and if desired. networks” are established and continue
are 100% fully dedicated to advanced to function as normal. For example, in the
alarm detection and alarm processing. Detection and recovery mechanisms case of an open circuit between buildings
Each network gateway module on the from open and short circuits, as well and on the connecting ring in the other
ID2net has an on-board powerful as earth faults, are totally reliable and direction, the panels inside each building
microprocessor responsible for the exceed the EN-54. Each communication continue to communicate with one
network integrity, including fault path between nodes are electrically another and any CBE between them
isolated, so that no ground loop problems operates as intended.
Up to 1.7km* Up to 1.7km*
Copper Copper
conductor conductor
cable cable
Up to 3km
Up to 8 loops, Up to 8 loops, Up to 8 loops,
Up to 1,584 Up to 1,584 Up to 1,584
devices devices devices
Fibre-optic cable
Up to 8 loops,
Up to 1,584
devices
Up to 8 loops, Up to 8 loops,
Up to 1,584 Up to 1,584
devices devices
Loop 1 Loop 1
Copper
Fibre-optic
conductor
cable
cable
Up to 1.7km* Up to 3km*
master/slave and mimic driver stations. The network
supports general control functions
The ID3000 Master/Slave network
remains compatible with NOTIFIER’s
such as Reset, Silence, Mute, Evacuate ID1000 and ID2000 intelligent control
network and more specific functions such as panels. However, as the ID1000 and
Point/Zone Isolate, Walk Test, Zone ID2000 do not support all of the
The ID3000 Master/Slave network is an
Event Broadcast and Control by Event functionality offered by the ID3000,
RS485 serial data link and can support
(CBE) across the network. Full system the network will be limited within the
up to 32 network stations. Up to a
monitoring and control is easily ID1000 and/or the ID2000 functionality.
maximum of 8 stations can be ID3000
achieved from the Master control panel.
panels with the rest being repeater
OptiPlex
Call Point
VIEW Sensor VIEW Sensor
Duct Sensor
Optical Sensor
Short Circuit
Isolation Module
Loop
Call Point Powered
Sounder
Ionisation Conventional
Sensor Detector Interface
The IDR Series repeaters and mimic run diagnostics tests on the repeater.
As with all other ID series intelligent
drivers complement the ID Series For security, a key switch on the front of
fire alarm panels from NOTIFIER, the
intelligent fire alarm panels. By placing the repeater enables function keys.
ID3000 comes in the Black/Grey
repeaters and/or graphical mimic
NOTIFIER colour as standard. A light
display panels at strategic points in the The mimic is a highly versatile product
grey cover and bezel option with a high
facility – such as nurse stations, floor that allows tremendous flexibility in
quality velvety finish and a stainless
landings, gatehouse or control rooms – configuring large numbers of system
steel cover and bezel option with clean
valuable time can be saved when status LED’s, relays and programmable
bright looks are also available for more
identifying the location of a fire and/or digital inputs. Up to 31 mimics can be
architecturally challenging sites.
evacuating the building. The repeaters attached to the ID3000 via an RS485
In areas where visibility is important or
also provide additional system control communication link. Utilising the
where local codes require the full range
and monitoring positions for the system maximum capabilities of a full array
of back-boxes, covers and bezels are
users. of 31 mimics, 15872 LED’s or relay driven
also available in red.
outputs, 1736 high current outputs
and 248 digital inputs are available.
Each mimic consists of a microprocessor
based mimic control board and up to 8
flexible driver boards. Each driver board
provides 64 LED or low current relay
drivers, 8 high current driven outputs
and 8 programmable digital inputs
typically used for Mute, Lamp Test,
Enable, Reset, Silence or other.
Termination boards are also available
to simplify wiring of LED’s relays and
The IDR6A Active Repeater Panel other devices to each driver board
combines a compact design with a 240
x 64 pixel graphics LCD, system control
buttons in surface or flush mounting
options. The large LCD replicates the
display on the ID3000 panel and utilises
the same simple menu driven user
interface as the ID3000 panel. The
control buttons and navigation keys
on the repeater provide the operator
with the ability to navigate through
menu options and event displays.
Furthermore it allows the user to
remotely reset the system, acknowledge
events, silence sounders, resound
sounders, initiate evacuation and to
graphical The ID3000 plug-in provides the user
complete control over all points in the
downs from a single push button.
All functions may be disabled at
system and includes: Acknowledge, Silence, various levels of security access.
display and Resound, Reset, Disable Zone, Enable
Zone, Disable Device, Enable Device, The workstation uses Microsoft®
control system Test Zone, Terminate Test & Evacuate. Windows® 98, providing an easy to use
and learn graphical user interface. The
UniNet-ID SOLUTIONS
The UniNet-ID™ will also allow a
combination of these functions to be
added together in a ‘Macro’. This will
operator is presented with a consistent
look and operation for all monitored
equipment. The workstation features
The ID3000 is fully compatible with the allow the systems provider to customise customisable screens and allows a wide
UniNet-ID™ graphics system. This will the workstation to provide functions variety of configuration options for any
allow up to two hundred ID3000 systems such as disable multiple plant shut situation.
to be connected to a single UniNet-ID™
server. Up to 10 servers may also be
networked together using standard
TCP/IP providing a single system
gateway to a large ID3000 system.
UK AUSTRALIA BENELUX BRAZIL CANADA CHILE CHINA GERMANY HONG KONG INDIA ITALY
JORDAN LEBANON MEXICO POLAND RUSSIA SINGAPORE SOUTH AFRICA SPAIN SWEDEN USA VENEZUELA
local distributor
Every care has been taken in the preparation of this data sheet but no liability can be accepted for the use of the information therein. Design features may be changed or amended without prior notice.
Ref: 436(1004).