Sie sind auf Seite 1von 4

Revision

Indication STANDARD SPECIFICATION


UOP Engineering Department
8-1283-12 Page 1 of 4
DATE STATUS SPNSR APVD
PIPE CLASS
HF-5, HF-50 30MAY17 Revised AB BP

Service Material and Flange Class Corrosion Allowance


Hydrocarbon and Trace HF Acid Killed Carbon Steel Class 300 RF Note 1
Temperature Range (Design) Pressure Range
-20F (29C) through 500F (260C) Per ASME B16.5 for sizes to 24 inch
CONFIDENTIAL – The information in this document is confidential and must not be used for any purpose, duplicated, or disclosed to others without UOP's written permission.

Flanges ASME Class 300 forged raised face. ASTM A 105.


1 1/2 inch and smaller socket weld.
2 inch to 24 inch welding neck bored to match ID of pipe.

Gaskets Spiral wound in accordance with ASME B16.20 with alloy UNS N04400 windings
(Note 2) and flexible graphite filler. PTFE (Limited to design temperature 450F (232C)) or
steel inner retaining ring for all sizes.

Grooved Metal Gaskets with Covering Layers with alloy UNS N04400 core and
flexible graphite covering layers in accordance with ASME B16.20 may be installed
as an alternate.

Fittings 1 1/2 inch and smaller forged socket weld. ASTM A 105.
(Note 3) 2 inch and larger welding same thickness as pipe. ASTM A 234 WPB.
Branch connection welding fittings. ASTM A 105.

Packed Gland Cast or forged, OS&Y, bolted bonnet, corrosion-inhibited die formed flexible graphite
Globe Valves packing with braided anti-extrusion rings. ASTM A 216 Grade WCB or ASTM A 105
Marked "M" body/bonnet, UNS N05500 stem, UNS N04400 trim, corrugated soft iron single sheet
on P&ID or spiral wound UNS N04400 windings and flexible graphite filler bonnet gasket.
(Notes 2, 4, 5,
6, 7 & 9) 1/2 inch to 1 1/2 inch ASME Class 800 socket weld, in compliance with
ASME B16.34 and API 602.
Bonney Forge HL-30-HF5, Descote 1500-UHF-5(50)-800, Pacific 3669-HF8,
PetrolValves F 102 UHF 5G, Strack 2/734 253, Velan 1W-2074B-02HM-U1,
Vogt SW-23141-HF5, Xanik BH08W-U.

2 inch to 6 inch ASME Class 300 raised face flanged, in compliance with
ASME B16.34.
Pacific 360-HF8, PetrolValves 1022 UHF 5G, Strack 2/734 254,
Velan 2F-1074C-02HM-U1, Xanik BH03R-U.

Packed Gland 1 1/2 inch to 20 inch, cast carbon steel, flanged, ASME Class 300, body and bonnet
Globe Valves ASTM A216 Grade WCB, disc ASTM B574 (UNS N10276), body seat Stellite 21 or
Marked "M" UNS N10276, stem ASTM B574 (UNS N10276), lantern ring UNS N04400, bonnet
on P&ID gasket spiral wound with UNS N04400 and graphite, corrosion inhibited die formed
(Notes 2, 7) flexible graphite with braided anti-extrusion rings, bonnet bolts ASTM A193 Grade
B7M and ASTM A194 Grade 2HM nuts, in conformance with ASME B16.34.
STANDARD SPECIFICATION
UOP Engineering Department
8-1283-12 Page 2 of 4
DATE STATUS SPNSR APVD
PIPE CLASS
HF-5, HF-50 30MAY17 Revised AB BP

Packed Gland Descote 1500-UHF-5-300GVF/1500-UHF-50-300GVF. GVF design is perfectly


Globe Valves interchangeable with globe valves.
Marked "M"
CONFIDENTIAL – The information in this document is confidential and must not be used for any purpose, duplicated, or disclosed to others without UOP's written permission.

on P&ID Descote 1500-UHF-5-300PVF/1500-UHF-50-300PVF. PVF design is perfectly


(Notes 2, 7, interchangeable with plug and gate valves.
cont.)

Bellows Sealed 1/2 inch to 1 1/2 inch cast or forged carbon steel, socket weld, ASME Class 800,
Globe Valves bellows sealed, body and bonnet ASTM A 105 or ASTM A 216 Grade WCB, UNS
Marked "M" N10276 disc, ASTM B 574 (UNS N10276) bellows, alloy UNS N10276 overlay body
on P&ID seat, UNS N05500 upper stem, UNS N10276 lower stem, bonnet gasket spiral wound
(Notes 2, 7) with UNS N04400 and graphite, corrosion inhibited die formed flexible graphite with
braided anti-extrusion rings, bonnet bolts ASTM A193 Grade B7M and ASTM A194
Grade 2HM nuts, in conformance with ASME B16.34.

Phönix 350EC4-5, Class 800

2 inch to 6 inch cast carbon steel, flanged, ASME Class 300, bellows sealed, body and
bonnet ASTM A 216 Grade WCB, disc ASTM B 574 (UNS N10276), bellows ASTM
B 574 (UNS N10276), body seat Stellite 21, stem ASTM B 574 (UNS N10276),
lantern ring UNS N04400, bonnet gasket spiral wound with UNS N04400 and
graphite, corrosion inhibited die formed flexible graphite with braided anti-extrusion
rings, bonnet bolts ASTM A 193 Grade B7M and ASTM A 194 Grade 2HM nuts, in
conformance with ASME B16.34.

Descote 2100-UHF-5-300GVF/2100-UHF-50-300GVF. GVF design is perfectly


interchangeable with globe valves.

Descote 2100-UHF-5-300PVF/2100-UHF-50-300PVF. PVF design is perfectly


interchangeable with plug and gate valves.

1/2 inch to 10 inch cast or forged carbon steel, flanged, ASME Class 300, bellows
sealed, body and bonnet ASTM A 105 or A 216 Grade WCB, UNS N10276 disc,
ASTM B 574 (UNS N10276) bellows, alloy UNS N10276 overlay body seat, UNS
N05500 upper stem, UNS N10276 lower stem, bonnet gasket spiral wound with UNS
N04400 and graphite, corrosion inhibited die formed flexible graphite with braided
anti-extrusion rings, bonnet bolts ASTM A193 Grade B7M and ASTM A194 Grade
2HM nuts, in conformance with ASME B16.34.

Phönix 350EC4-5, Class 300

Gate Valves Cast or forged, OS&Y, bolted bonnet, corrosion-inhibited die formed flexible graphite
Marked "M" packing with braided anti-extrusion rings. ASTM A 216 Grade WCB or ASTM A 105
on P&ID body/bonnet, UNS N05500 stem, solid wedge, UNS N04400 trim, corrugated soft iron
(Notes 2, 4, 5, 6, single sheet or spiral wound Monel windings and flexible graphite filler bonnet
7 & 9) gasket.
STANDARD SPECIFICATION
UOP Engineering Department
8-1283-12 Page 3 of 4
DATE STATUS SPNSR APVD
PIPE CLASS
HF-5, HF-50 30MAY17 Revised AB BP

Gate Valves 1/2 inch to 1 1/2 inch ASME Class 800 socket weld, in compliance with API 602.
Marked "M" Bonney Forge H-10-HF5, Pacific 3656-HF8, PetrolValves F 101 UHF 5G, Strack
on P&ID 2/766 721, Velan 1W-2054B-02HM-U1, Vogt SW-13111-HF5, Xanik GH08W-U.
CONFIDENTIAL – The information in this document is confidential and must not be used for any purpose, duplicated, or disclosed to others without UOP's written permission.

(Notes 2, 4, 5, 6,
7 & 9, cont.) 2 inch to 24 inch ASME Class 300 raised face flanged, in compliance with API 600.
Pacific 350-HF8, PetrolValves 1012 UHF 5G, Strack 2/766 723,
Velan 2F-1064C-02HM-U1, Xanik GH03R-U.

Check Valves Cast or forged, bolted bonnet cap, ASTM A 216 Grade WCB or ASTM A 105
Marked "M" body/bonnet cap, UNS N04400 trim, corrugated soft iron single sheet or spiral wound
on P&ID Alloy 400 windings and flexible graphite filler bonnet gasket.
(Notes 2, 4, 5, 6,
7 & 9) 1/2 inch to 1 1/2 inch ASME Class 800 socket weld, lift or ball type, in compliance
with ASME B16.34 and API 602.
Bonney Forge HL-40-HF5, Pacific 3682-HF8, PetrolValves F 501 UHF 5G, Strack
3/734 301, Vogt SWB-43721-HF5, Xanik LH08W-U.

2 inch to 16 inch ASME Class 300 raised face flanged, swing type, in compliance with
ASME B16.34.
Pacific 380R-HF8, PetrolValves 1032 UHF 5, Strack 2/766 722,
Velan 2F-1114C-02HM-U1, Xanik WH03R-U (with external hinge pin), Xanik
WH03R-U-Z (with internal hinge pin).

Butterfly Double-flanged, triple-offset, high performance butterfly valve, ASME Class 300,
Valves ASTM A216 Grade WCB body, UNS N04400 disc, UNS N10276 shaft, laminated
(Notes 2, 10) UNS N10276 and graphite seat ring, hardfaced seat, graphite stem packing, in
compliance with API 598 and API 609, with gear operator.

6 inch to 24 inch face-to-face per ASME B16.10, Table 2, Col. 10


Vanessa Series 30000 Model UOP-12-C2-A-01

6 inch to 24 inch face-to-face per ISO 5752 Table 1, Col. 13


Vanessa Series 30000 Model UOP-12-C2-B-01

Bolting Stud bolts ASTM A 193 Grade B7 or B7M threaded full length with 2 ASTM A 194
Grade 2H or 2HM nuts.

Pipe ASTM A 106 Grade B seamless.


(Note 8) Contractor to calculate wall thickness.

Notes: 1. Corrosion allowances are as follows:


Class HF-5 – 0.125 inch (3.0 mm)
Class HF-50 – 0.25 inch (6.0mm)

2. Flexible graphite shall be a minimum of 98% by weight pure carbon.


STANDARD SPECIFICATION
UOP Engineering Department
8-1283-12 Page 4 of 4
DATE STATUS SPNSR APVD
PIPE CLASS
HF-5, HF-50 30MAY17 Revised AB BP

Notes (cont.): 3. 1 1/2 and smaller fittings are as follows:


Class 6000 for HF-5
Class 9000 for HF-50
CONFIDENTIAL – The information in this document is confidential and must not be used for any purpose, duplicated, or disclosed to others without UOP's written permission.

4. An alloy UNS N04400 weld intended to be deposited onto a carbon steel


surface requires a nickel butter layer for separation.

5. For seat rings in valves 2 inch and larger, the following options are permitted:

a. For threaded-in seat rings, the body seat ring area shall be machined to accept
an alloy UNS N04400 or nickel weld inlay. Once the weld inlay is
completed, the valve body area is then re-machined and threaded to accept
the alloy UNS N04400 seat rings.

b. Alloy UNS N04400 seat rings, when threaded into a carbon steel seat pocket,
are acceptable only if double seal welded.

c. Alloy UNS N04400 seat rings, when press-fit into the carbon steel seat
pocket, must be double seal welded. Where double seal welding is not
practical, an alloy UNS N04400 or nickel weld inlay shall be installed in the
valve body to accept the alloy UNS N04400 seat rings. A single seal weld
shall be installed on the pipe bore side (gate and check valves) or on the inlet
side (globe valves).

d. For an alloy UNS N04400 weld overlay (integral) seat ring, the carbon steel
seat pocket shall be machined to accept a welded nickel butter layer. Once
the butter layer is completed, an alloy UNS N04400 weld overlay shall be
deposited and machined to the final seat ring contour.

6. For valves 1 1/2 inch and smaller the alloy UNS N04400 seat ring shall be
press-fit into the carbon steel seat pocket.

7. No valve substitutions are permitted.

8. Minimum wall thickness for 1 1/2 inch and smaller pipe shall be as follows:
Class HF-5 – no less than Schedule 160.
Class HF-50 – no less than Schedule XX-Strong.

9. Full corrosion allowance 0.25 inch (6.0 mm) is not available for 1-1/2 inch
and smaller valves.

10. See UOP Project Specification 801 for chemical composition limits.

Manufacturer (Mandatory):

Bonney Forge, Pacific, PetrolValves, Phönix, Strack, Vanessa, Velan, Vogt, Xanik

Das könnte Ihnen auch gefallen