Beruflich Dokumente
Kultur Dokumente
Product
Catalog
Shipping Address:
Karts and Parts
7051 Hunters Creek Rd.
South Wales, New York 14139
Mailing Address:
Karts and Parts
7051 Hunters Creek Rd.
South Wales, New York 14139
Phone: 716-655-2883
Fax: 716-655-2883
E-mail: gary@smartkartparts.com
When ordering please specify our part number, quantity and how you may be contacted.
Prices: Prices are subject to change without notice and are F.O.B. shipping point (South Wales, NY);
shipping charges are added to quoted prices and appear on your invoice.
Terms: ALL SALES are Cash-in-advance. Credit Card, Money Order, certified check in U.S. funds only
or personal checks are the only accepted forms of payment. Personal checks will delay order processing.
Delivery: We strive to give your order our immediate attention. We appreciate as much lead time as
possible in order to schedule your shipment. Shipping will be via US Postal Service Parcel Post, UPS
Ground or DHL Ground. If you need your shipment quicker or for areas outside the lower 48 states please
e-mail us for a shipping quote before ordering.
Claims and Returned Goods: Goods mat not be returned without our prior authorization. Contact us for
an RGA number; we may refuse to accept unauthorized returns. Claims for breakage or loss must be made
directly with the carrier. Claims of defect or shortage must be made within ten days of delivery of order.
Returned goods are subject to an inspection and handling charge of 15%. Full credit or replacement will be
given if there is a manufacturing defect or an error in filling the order.
Limited Warranty: Seller warrants to the original purchaser only that goods will be of the kind and
quality described in the invoice and will be free of defects in material or workmanship for a period of 90
days from the original date of the original buyer’s purchase. After proper notification by the original
purchaser as described below and upon Seller’s satisfaction that goods have been stored, transported,
installed, maintained and operated as required by Seller and in accordance with standard industry practice.
Seller will, at its option, repair or replace goods that are found to Seller’s satisfaction, to be non-
conforming or defective in material or workmanship. Seller may refund the purchase price to the original
purchaser if Seller is unable by repair or replacement to make the goods perform the function for which
they, according to Seller, were designed. This warranty does not obligate Seller to bear any transportation,
shipping, removal or installation charges in connection with goods covered by this warranty.
This warranty does not cover defects or costs caused by: 1.) wear and tear. 2.) modification, alteration,
repair or service of the goods other than by Seller. 3.) physical abuse to or misuse of the goods. 4.) use of
the goods other than that for which they were intended as designated by Seller.
Terms of Sale & Warranties
To obtain warranty benefits the original purchaser must within the warranty period: 1.) notify Seller in
writing of the particulars of the defect or failure or the goods to conform; and 2.) deliver the goods to Seller
at the address listed above on this page with shipping costs to be born by purchaser.
THE ABOVE WARRANTIES ARE EXCLUSIVE, THE ONLY WARRANTIES ON ANY GOODS
WHETHER MANUFACTURED BY SELLER OR OTHERS AND ARE IN LIEU OF ANY
WARRANTY OF MERCANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALL
WARRANTIES WHETHER EXPRESS OR IMPLIED, OTHER THAN AS STATED ABOVE ARE
SPECIFICALLY EXCLUDED AND DISCLAIMED. ANY DESCRIPTION OF THE GOODS,
AFFIRMATION OF FACT OR PROMISE, SAMPLE, MODEL, PHOTOGRAPH,
ILLUSTRATION OR MODEL, WHETHER OR NOT IN THIS CATALOG, IS NOT A PART OF
THE BASIS OF THE BARGAIN AND DOES NOT CONSTITUTE A WARRANTY THAT THE
GOODS WILL CONFORM THERETO.
Limitation of Liability: Correction of defects and/or non-conformities, in the manner and for the period of
time provided above, shall constitute fulfillment of all liabilities of the seller to any purchaser whether
based on contract or otherwise. The seller shall not under any circumstances be liable for any damages,
whether direct, special, incidental or consequential whatsoever. The remedies set forth herein are exclusive
and the liability of Seller with respect to any contract, or anything done in connection therewith including
but not limited to the performance or breach thereof or from the manufacture, sale, delivery, resale,
installation or use of any goods covered by or furnished under this contract whether arising out of contract,
negligence, or under any warranty, or otherwise, shall not, except as expressly provided herein, exceed the
price of the non-conforming or defective goods upon which such liability is based. Without limiting the
foregoing, no liability shall result from delay in performance or non-performance caused by circumstances
beyond our control, including but not limited to acts of God, fire, flood, war, government action, accident
or work stoppage.
Printers, Stenographic and Clerical Errors: In the course of doing business, errors by printers,
stenographers, computer operations and clerks sometimes occur. We reserve the right to correct any such
errors without penalty.
INDEX OF PRODUCTS
A C L S
Adapter Hubs . . . . . . . . . . . . . . . . 11 Control Cables . . . . . . . . . . . 38, 39 Live Axle Bearing Kits. . . . . . . . . 22 Sprocket Hub, Steel . . . . . . . . . . 26
Aluminum Wheels . . . . . . . . . 4, 5, 6 Control Rod Anchors . . . . . . 34, 35 Live Axle Hubs . . . . . . . . 11, 24, 26 Sprockets:
ATV Wheels . . . . . . . . . . . . . . . . . . 7 Controls, Throttle/Brake . . . . 34, 39 Locking Collars . . . . . . . 33, 36, 49 “A” Type. . . . . . . . . . . . . . 26-29
ATV Wheel Adapter Hubs . . . . . . . 11 Cotter Pins. . . . . . . . . . . . . . . . . 49 Locknuts, Assorted . . . . . . . . . . 49 “B” Type . . . . . . . . . . . . . . . . 30
Axles. . . . . . . . . . . . . . . . . 20-21, 40 Lug Nuts . . . . . . . . . . . . . . . 10, 49 “C” Type . . . . . . . . . . . . . . . . 30
Aluminum . . . . . . . . . . . . . . . . 20 D Aluminum. . . . . . . . . . . . . 24-29
ATV . . . . . . . . . . . . . . . . . . 20, 21 Disc Brake, Posi Stop Mech. . . . 19 M Tru-A-Line, #35 . . . . . 24, 25
Chrome-Moly Tubular . . . . . . . 20 Draggin-Skin Racing Clutch . . . . 42 Mini Bike Tuf-N-Tru, #35. . . . . . . . . . 25
Flexpruf Steel. . . . . . . . . . . . . . 21 Drums, Brake . . . . . . . . . 16, 17, 18 Axles . . . . . . . . . . . . . . . . . . . 40 Tru-N-Fine, #219 . . . . . . . . 25
Kart . . . . . . . . . . . . . . . . . . 20, 21 Drum & Hub Assemblies . . . 17, 18 Components List . . . . . . . . . . 46 Blank. . . . . . . . . . . . . . . . . . . 29
Mini-Bike . . . . . . . . . . . . . . . . . 40 Drum & Sprocket Assemblies. 7, 17 Forks & Frames . . . . . . . . . . . 46 Heavy Duty. . . . . . . . .26, 27, 28
Solid Steel . . . . . . . . . . . . . . . . 21 Seats. . . . . . . . . . . . . . . . . . . 45 Idler . . . . . . . . . . . . . . . . . . . 28
Standard Steel Tubular . . . . . . . 20
E Shock Absorbers . . . . . . . . . . 41 Jumbo XNT . . . . . . . . . . . . . . 25
Axle Nuts . . . . . . . . . . . . . . . . 40, 49 Engine Mounting Plates . . . . . . . 37 Mini Hub, (Uni-Hub). . . . . . . . . . 24 Mini Aluminum . . . . . . . . . . . 24
Axle Sprockets . . . . . . . . . 26, 27, 28 Engine Sprockets . . . . . 26, 28, 30 Motorcycle Sprockets. . . . . . 28, 29 Motorcycle . . . . . . . . . . . . . . 29
Azusalite Nylon Wheels . . . . . . . 8, 9 Engine Tester . . . . . . . . . . . . . . . 48 Mount, Swing . . . . . . . . . . . . . . 36 Quarter Midget . . . . . . . . . . . 28
F Mounting Plates, Engine. . . . . . . 37 Shifter . . . . . . . . . . . . . . . . . . 28
B
Fenders . . . . . . . . . . . . . . . . . . . 40 N Specialty . . . . . . . . . .26, 27, 28
Bearings, Axle . . . . . . . . . . . . 14, 22 Stamped Steel . . . . . . . . . . . . 27
Jackshaft . . . . . . . . . . . . . . 14, 36 Fender Washers . . . . . . . . . . . . . 37 Neck Collars (See Racewear Folder)
Fittings, Brass . . . . . . . . . . . . . . 19 Steering Shaft & Hub Assy/Kits . 33
Rod End. . . . . . . . . . . . 14, 15, 34 Number Sets . . . . . . . . . . . . . . . 39 Steering Wheels
Wheel . . . . . . . . . . . . . . . . 11, 14 Cable & Conduit. . . . . . . . . . . 38 Nuts, Assorted . . . . . . . . . . . . . . 49
Fuel Line & Tank . . . . . . . . . . 37 Butterfly . . . . . . . . . . . . . . . . 32
Tapered Roller . . . . . . . . . . 11, 14 Nyliner Insert Bushings . . . . 31, 40 Round . . . . . . . . . . . . . . . . . . 32
Types. . . . . . . . . . . . . . . . . . . . 11 Flangettes, Bearing. . . . . . . . 22, 36 Nylon “Azusalite” Wheels . . . . . 8, 9
Foot Pedals . . . . . . . . . . . . . . . . 34 Steering Wheel Cap Assembly . . 33
Bearing Hangers. . . . . . . . . . . 22, 35
Foot Pegs . . . . . . . . . . . . . . . . . 45 O Suits . . . . . . (See Racewear Folder)
Bearing Kits . . . . . . . . . . . . . . . . . 22
Forks, Mini-Bike . . . . . . . . . . . . . 46 Offset Links, Chain . . . . . . . . . . . 23 Swing Mount Kit . . . . . . . . . . . . 36
Bolts, Assorted. . . . . . . . . . . . . . . 49
Frames, Kart . . . . . . . . . . . . . . . 47 Oil, L&T Clutch . . . . . . . . . . . . . 43 Switch, Kill Button . . . . . . . . . . . 33
Bolts w/Drilled Holes . . . . . . . 10, 49
Bolt Kit for Spacers . . . . . . . . . . . . 8 Mini-Bike . . . . . . . . . . . . . . . . 46 T
Brakes, 4-1/2" Azusa . . . . . . . . . . 17 Fuel Line . . . . . . . . . . . . . . . . . . 37 P
Pants . . . . . (See Racewear Folder) “T” Fitting, Delrin® . . . . . . . . . . 37
5" Azusa . . . . . . . . . . . . . . . . . 18 G Tank Fittings . . . . . . . . . . . . . . . 37
6" Azusa . . . . . . . . . . . . . . . . . 18 Pedals, Brake & Throttle. . . . . . . 34
Go Kart, Components List . . . . . 47 Pitman Arms . . . . . . . . . . . . 33, 35 Tapered Roller Bearings. . . . .11, 14
Band, 4", 4-1/2" . . . . . . . . . . . . 16 Throttle Controls . . . . . . . . . 34, 39
Frames . . . . . . . . . . . . . . . . . 47 Pressure & Vacuum Tester . . . . . 48
Posi-Stop Disc. . . . . . . . . . . . . 19 Throttle Pedal . . . . . . . . . . . . . . 34
Seats. . . . . . . . . . . . . . . . . . . 44
Brake Cables & Fittings . . . . . 38, 39 Q Throttle Rods & Kits . . . . . . . . . 34
Brake Drums . . . . . . . . . . 16, 17, 18 Gloves, Racing. (See Racewear Folder)
Grips, Throttle & Dummy . . . . . . 39 Quarter Midget Sprockets. . . . . . 28 Tie Rods & Tie Rod Kits . . . . . . . 15
Brake Drum & Sprocket Assy . . . . 17 Tire Mounting Safety . . . . . . 10, 13
Brake Drum Platform . . . . . . . . . . . 8 Grommets, Rubber . . . . . . . . . . 37
R Tires, ATV & Trailer . . . . . . . . . . . 7
Brake & Hub Assembly. . . . . . 17, 18 H Racewear. . . . . (See Racewear Folder) Ribbed & Sawtooth . . . . . . . . 13
Brake Lever . . . . . . . . . . . . . . . . . 39 Hardware, Assorted . . . . . . . . . . 49 Racing Collars . (See Racewear Folder) Slicks & Turf Saver . . . . . . . . 12
Brake Line Fittings . . . . . . . . . . . . 19 Helmet Cushion (See Racewear Folder) Racing Pants . . (See Racewear Folder) Studded, Knobby & Universal. 13
Brake Line, Hydraulic . . . . . . . . . . 19 Hex Nuts, Assorted . . . . . . . . . . 49 Racing Suits . . (See Racewear Folder) Tire Tread Patterns. . . . . . . . . . . . 4
Brake Pedal . . . . . . . . . . . . . . . . . 34 Hex Nuts, Slotted . . . . . . . . . 10, 49 Rod Ends . . . . . . . . . . . . 14, 15, 34 Trailer Wheels & Tires . . . . . . . . . 7
Brake Rods & Kits . . . . . . . . . . . . 34 Housing, Cable. . . . . . . . . . . . . . 38 Rods, Brake & Throttle. . . . . . . . 34 Twist Grip Assemblies . . . . . . . . 39
Brake Shoes . . . . . . . . . . . 17, 18, 19 Hubs, “A” Sprocket . . . . . . . . . . 24 Tie. . . . . . . . . . . . . . . . . . . . . 15 Tubes, Inner . . . . . . . . . . . . . 12, 13
Brake Spacer . . . . . . . . . . . . . . . . 18 ATV Wheel Adapter . . . . . . . . 11 Roller Chain . . . . . . . . . . . . . . . . 23
Brass Fittings . . . . . . . . . . . . . . . 19 Live Axle . . . . . . . . . . 11, 24, 26 (See also Roller Chain Folder) U
Bucket Seats & Covers . . . . . . . . . 44 Rubber Grommet Kit . . . . . . . . . 37 Uni-Hub . . . . . . . . . . . . . . . . . . 24
Mini . . . . . . . . . . . . . . . . . . . 24
Bushings, Assorted . . . . . . . . . . . 40
Steel . . . . . . . . . . . . . . . . 24, 26 V
Bushing, Nyliner. . . . . . . . . . . 31, 40
Steering Shaft . . . . . . . . . . . . 33
S
Uni-. . . . . . . . . . . . . . . . . . . . 24 Safety Nuts & Bolts . . . . . . . . . . 10 Vacuum & Pressure Tester . . . . . 48
C Valves, Fuel . . . . . . . . . . . . . . . . 37
Vari- . . . . . . . . . . . . . . . . . . . 24 Screws, Assorted . . . . . . . . . . . . 49
Cables & Cable Housing . . . . . 38, 39 Seats, Kart . . . . . . . . . . . . . . . . . 44 Vari-Hub & Components . . . . . . 24
Cable Fittings . . . . . . . . . . . . . . . . 38 Hydraulic Brake Line & Fittings. . 19
Hydraulic Shock Absorbers . . . . 41 Mini-Bike . . . . . . . . . . . . . . . . 45 W
Cap Assy for Steering Wheels. . . . 33 Seat Covers, Kart . . . . . . . . . . . . 44
Cap Screws . . . . . . . . . . . . . . . . . 49 I Washers . . . . . . . . . . . . . . . .37, 49
Set Screws . . . . . . . . . . . . . . . . 49
Chain & Chain Parts . . . . . . . . . . . 23 Weldments . . . . . . . . . . . . . . . . 35
Idler Sprockets . . . . . . . . . . . . . 28 Shafts, Steering . . . . . . . . . . . . . 33
(See also Roller Chain Folder) Wheels
Inner Tubes . . . . . . . . . . . . . 12, 13 Shock Absorbers . . . . . . . . . . . . 41
Chain Breaker. . . . . . . . . . . . . . . . 23 Aluminum . . . . . . . . . . . . 4, 5, 6
Shoes, Kart . . . (See Racewear Folder)
Chain Deflector . . . . . . . . . . . . . . 23 J ATV . . . . . . . . . . . . . . . . . . . . . 7
Slotted Nuts . . . . . . . . . . . . . 10, 49
Clamps, Cable & Conduit . . . . . . . 38 Jackets . . . . . . (see Racewear Folder) Azusalite Nylon . . . . . . . . . . 8, 9
Snap Rings . . . . . . . . . . . . . 33, 49
Tube Gripping . . . . . . . . . . 38, 45 Jackshafts & Kits . . . . . . . . . . . . 36 Steel . . . . . . . . . . . . . . . . . . . . 7
Socket Head Cap Screws . . . . . . 49
Clevises . . . . . . . . . . . . . . . . . 34, 38 Jackshaft Sprockets . . . . . . . 30, 36 Trailer . . . . . . . . . . . . . . . . . . . 7
Clevis Pins . . . . . . . . . . . . . . . . . . 34 Spacers, Assorted . . . . . . . . . . . 40
Jamnuts . . . . . . . . . 14, 34, 40, 49 Brake. . . . . . . . . . . . . . . . . . . 18 Wheel Bearings . . . . . . . . . . . . . 14
Clips, Conduit . . . . . . . . . . . . . . . 38 Types . . . . . . . . . . . . . . . . . . 11
Split Sprocket . . . . . . . . . . . . . 25 K Spindle, Nylon . . . . . . . . . . . . 31
Wheel . . . . . . . . . . . . . . . . . . . 8 Wheel/Drum/Spkt Assemblies . . . 7
Clothing . . . . . . . (see Racewear Folder) Kart, Components List . . . . . . . . 47 Wheel Hubs . . . . . . . . . . . . . . . . 11
Clutches, Kart & Mini-Bike. . . . 42-43 Spark Plug Adapter . . . . . . . . . . 48
Frames . . . . . . . . . . . . . . . . . 47 Spindle Brackets . . . . . . . . . 31, 35 Wheel Spacers & Bolt Kit . . . . . . . 8
Draggin Skin Racing . . . . . . . . 42 Seats . . . . . . . . . . . . . . . . . . 44 Wheel Specifications . . . . . . . . . 10
L&T Racing . . . . . . . . . . . . . . . 43 Spindles, Kits & Components. . 31, 35
Keys & Keystock . . . . . . . . . . . . 49 Split Locking Collars . . . . . . 36, 49 Wheel Weights. . . . . . . . . . . . . . . 5
Collars, Split Locking . . . . . . . 36, 49 Kill Button Switch . . . . . . . . . . . 33
w/Set Screw. . . . . . . . . 33, 36, 49 Springs, Compression . . . . . 34, 38 X, Y & Z
Compression Fittings, Brass . . . . . 19 L Brake . . . . . . . . . . . . . . . .17, 18 XNT “Jumbo” Sprockets. . . . . . . 25
Conduit . . . . . . . . . . . . . . . . . 38, 39 L&T Racing Clutches . . . . . . . . . 43 Sprocket & Drum Assys . . . . . . . 17 “Y” Fitting, Delrin® . . . . . . . . . . 37
Clamps & Clips . . . . . . . . . . . . 38 Levers, Brake . . . . . . . . . . . . . . . 39 Sprocket Guards . . . . . . . . . . . . 27 Zytel® Nylon Wheels . . . . . . . . 8, 9
Connecting Links, Chain . . . . . . . . 23 Live Axles . . . . . . . . . . . . . . 20, 21 Sprocket Holder, Heavy Duty . . . 26
Page 3
i n u m Alloy
Alum ls 5 inch AZUSA’S FIVE INCH ALUMINUM SPLIT-RIM WHEELS
Whee
h eel s
L W
STEE
4" “AZUSALITES”
For 1-3/8" OD BALL BEARINGS 3" WIDE
With 1/2" ID Prec Ball Bearings 1051
✓ Split-Rim Design
With 5/8" ID Prec Ball Bearings
With 1/2" ID Std Ball Bearings
1053
1055
✓ 2.92" Bolt Circle
With 5/8" ID Std Ball Bearings
With 3/4" ID Std Ball Bearings
1054
1041
✓ Grade 5 Hardware
Two Halves w/Nuts & Bolts Only
One Half Only
1050
7900
✓ Grade 5 Hardware
✓ Tough and Lightweight
✓ Models for Two Bearing OD Sizes
✓ Split-Rim Design For Easy Mounting
✓ Specially Engineered Zytel: Nylon Compound
6" “AZUSALITES”
FOR 1-3/8" OD BALL BEARINGS 3" WIDE
With 5/8" ID Prec Ball Bearings 1072
With 5/8" ID Std Ball Bearings 1073
With 3/4" ID Std Ball Bearings 1078
Two Halves w/Nuts & Bolts Only 1075
One Half Only 7921
FOR 1-5/8" OD BALL BEARINGS 3" WIDE
With 3/4" ID Prec Ball Bearings 1077
Two Halves w/Nuts & Bolts Only 1075
One Half Only 7921 Tires That Fit 6" Azusalite Wheels
See page 10 for Complete Wheel Dimensions TIRE SIZE TREAD
410/350 x 6 Sawtooth
13-400 x 6 Ribbed
13-500 x 6 Ribbed
410/350 x 6 Studded
410/350 x 6 Slick, Regular
13-500 x 6 Turf Saver
Click For Index See page 12 & page 13 for Tire & Tube Part Nos. Page 9
L Tire Bead Maximum Wheel Hub Weight
fi Aluminum Wheels
Speci
T B W D H LBS
5" TRI STAR
For Ball Bearings (1-3/8 OD) 5" 3.12" 3.7" 6" 2.90" 2.4
For Live Axle 5" 3.12" 3.7" 6" 2.90" 2.4
For Tapered Roller Bearings 5" 3.12" 3.7" 6" 2.90" 2.4
6" “ASTRO”
For Ball Bearings (1-3/8 OD) 6" 3.00" 3.50" 7.12" 3.00" 1.9
8" “SPINNER”
For Ball Bearings (1-3/8 OD) 8" 3.00" 3.50" 9.00" 3.00" 2.5
SIZE PART
1/4-28 8527
5/16-24 8535
3/8-24 8536
1/2-20 8528
5/8-18 8521
5/8-18 Thin 8518
6" NYLON
For Ball Bearings (1-3/8 OD) 6" 2.75" 3.25" 7.12" 3.25" 1.2
For Ball Bearings (1-5/8 OD) 6" 2.75" 3.25" 7.12" 3.25" 1.2
E L H UBSes
✓ 1/2-20 x 1-1/4" Welded Studs W H Ee a r i n g T y p
✓ Four Bolts on a 4" Bolt Circle a nd B
✓ Lug Nuts Included
✓ Heavy Duty Steel
✓ Bright Zinc Plated
...With Tapered Roller Bearings!
Wheel Hub with 5/8” ID TRB 2299
Wheel Hub with 3/4” ID TRB 2298
Wheel Hub, 5/8" Sealed TRB 2292
Wheel Hub, 3/4" Sealed TRB 2295
Wheel Hub, less Cup & Cone 2297
SLICKS
SIZE TIRE PLY WIDTH* OD* INNERTUBE
9-350 x 4 7090 4 3.5" 8.0" 7128
410/350 x 4 7041 4 3.5" 10.5" 7130
340/300 x 5N 7045 4 2.5" 10.8" 7131
340/300 x 5 7042 4 3.5" 10.8" 7131
11-350 x 5 7029 4 3.7" 11.0" 7132
410/350 x 5 7043 4 3.5" 11.5" 7132
11-360 x 5H 7094 4 3.6" 11.0" 7131
11-350 x 5 7029 4 3.7" 11.0" 7132
12-400 x 5H 7095 4 4.0" 12.0" 7132
11-450 x 5 7016-2 2 4.2" 10.5" 7132
10-450 x 5 7060 4 5.0" 9.5" 7131
11-600 x 5C 7092-2 2 5.3" 10.5" 7116
11-600 x 5 7061 4 5.5" 10.5" 7116
11-600 x 5 7093 4 6.25" 11.0" 7116
11-710 x 5 7062 4 8.0" 10.0" 7116
410/350 x 6 7044 4 3.5" 12.6" 7133
13-400 x 6H 7096 4 4.0" 13.0" 7133
12-600 x 6 7017-2 2 6.0" 11.8" 7127
480/400 x 8 7004-2 2 4.6" 16.3" 7121
16-650 x 8 7055 4 6.5" 15.5" 7118
18-950 x 8 7019 4 9.5" 15.5" 7120
N - Narrow C - Carlisle Super Slick H - Heavy Duty (Concession Kart)
INNER TUBES
**indicates straight stem. All
other tube stems are bent.
SIZE PART
SIZE PART SIZE PART
410/350 x 6 7133
200 x 50 7143 410/350 x 6** 7144 16-800 x 7** 7119
280/250 x 4 7129 12-600 x 6 7127 325/350 x 8** 7123
13-500 x 6 7136 480/400 x 8 7124
300 x 4 7128
13-500 x 6** 7122 480/400 x 8** 7121
410/350 x 4 7130
13-650 x 6 7141 16-650/750 x 8** 7118
340/300 x 5 7131 18-850/950 x 8** 7120
530/450 x 6 7134
410/350 x 5 7132 15-600 x 6 7125 250x10** 7126
11-400 x 5 7135 145/70 x 6 7140 325/350 x 10** 7137
11-600 x 5 7116 800 x 6 7138 20.5-800 x 10** 7142
SAWTOOTH
SIZE TIRE PLY WIDTH* OD* INNERTUBE
280/250 x 4 7035 4 2.8" 8.8" 7129
410/350 x 4 7036 4 3.5" 10.5" 7130
340/300 x 5 7038 4 3.5" 10.5" 7131
410/350 x 5 7037 4 3.5" 11.5" 7132
410/350 x 6 7039 4 4.0" 12.5" 7133
530/450 x 6 7051 4 5.3" 14.7" 7134
480/400 x 8 7010-2 2 4.6" 16.0" 7121
STANDARD ECONOMY
BALL BEARINGS
ID OD PART
*Other Lengths Available in Quantity; Please Inquire re: Desired Lengths & Minimum Order Requirements
Brake Pin
Anchor Pin
(not included)
✓ Spring-Steel Bands
✓ 2 Piece Bonded Brake Lining
Brake Drum Brake Cable ✓ Steel Brake Pin with Cable Hole
✓ Riveted End/Mounting Brackets
✓ Economical
Axle
✓ B R A KES
" es
4 - 1d/A2c c e s s o r i
Two Backing Plate Styles
*Actuator arm available with right offset, left offset
or straight. Unless otherwise specified right-hand
✓ Three Actuator Arm Choices* an
offset actuator arm will be supplied as illustrated.
✓ Bonded Brake Shoes
✓ 5/8" , 3/4" or 1" Axle Bore
RENEWAL PARTS
ROUND BACKING PLATE BRAKE ASSY DESCRIPTION PART
DESCRIPTION PART Lined Brake Shoes, Pair 2260 ANCHOR BACKING PLATE ASSEMBLY
Steel backing plate, 5/8" bore 2270S Actuator Arm 2263
DESCRIPTION PART
Aluminum backing plate, 5/8" bore 2270A Spring (2 required) 2264
Steel backing plate, 3/4" bore 2272S Cam 8235 Steel anchor backing plate, 5/8” bore 2208
Aluminum backing plate, 3/4" bore 2272A Lockwasher-Split 8302 Steel anchor backing plate, 1” bore 2269
Steel backing plate, 1" bore 2271S Flat Washer 8304
Aluminum backing plate, 1" bore 2271A Locknut for Cam, 5/16-18 8510
DESCRIPTION PART
72 Tooth Sprocket, Drum & Hub Kit, #35 Chain 2268-*
60 Tooth Sprocket, Drum & Hub Kit, #35 Chain 2267-*
Flanged Drum & Hub kit 2266-*
Standard Drum & Hub kit 2265-*
1860
2550
COMPLETE HUB & BRAKE KITS PART
6" Brake, Plated Drum, Mounted Uni- 2551
Hub - 1" ID Bore with 1/4" Keyway
8139
As above plus Spacer & Hardware 2552 2555
KIT COMPONENTS PART
RENEWAL COMPONENTS PART
6" Brake Assembly, Less Drum 2550
Uni-Hub (1" ID with 1/4" Keyway) 2555 Brake Shoes with Bonded Lining, Bulk, Pair 8100
Drums - 4-9/16" Bore: Brake Shoes with Bonded Lining, Packaged, Pair 8101
• Unplated 8138 Spring - Short (2 required) 8455
• Plated 8139 Spring - Long (2 required) 8456
• Unplated with Riveted Uni-Hub 8149 Arm Assembly Kit with Fasteners 8147
• Plated with Riveted Uni-Hub 8142 Cam Assembly 8148
4V
1823
DESCRIPTION PART 1822
Brake Assembly without Disc 1822
Disc Only, 8" Diameter, 1" Bore 1823
Replacement Shoes with Lining (2 required) 8118
8311 8310
8308
Brass Fittings Kit 2253 Pressure Tubing, 3/16 Nylon, per ft. 8307
✓ Chrome-Moly Steel
✓ Standard Steel
✓ Strong & Lightweight STANDARD STEEL TUBULAR AXLES
✓ All Centerless Ground 1-1/4" O.D. • .190" WALL • STANDARD STEEL
✓ Opposing, Offset Keyways LENGTH PART LENGTH PART
DIAMETER KW LENGTH .190 wall* .250 wall* DIAMETER KW LENGTH .130 wall* .156 wall* .225 wall*
1-1/4" 1/4" 23" 1421-23 — 1-3/8" 1/4" 34" — — 1422-34
1-1/4" 1/4" 26" 1421-26 — 1-3/8" 1/4" 36" — — 1422-36
1-1/4" 1/4" 32" 1421-32 — 1-3/8" 1/4" 40" — — 1422-40
1-1/4" 1/4" 34" 1421-34 1424-34 1-3/8" 1/4" 42" — — 1422-42
1-1/4" 1/4" 36" 1421-36 1424-36 1-3/8" 1/4" 44" — — 1422-44
1-1/4" 1/4" 37" 1421-37 — 1-1/2" 1/4" 40" — 1440-40 —
1-1/4" 1/4" 38" 1421-38 — 1-1/2" 1/4" 42" — 1440-42 —
1-1/4" 1/4" 39" 1421-39 — 1-1/2" 1/4" 44" — 1440-44 —
1-1/4" 1/4" 40" 1421-40 1424-40 35mm 5/16" 40" — — 1423-40
1-1/4" 1/4" 42" 1421-42 1424-42 35mm 5/16" 44" — — 1423-44
1-1/4" 1/4" 44" 1421-44 1424-44 40mm (blank) 40" 1425-40B — —
1-1/4" 1/4" 46" 1421-46 1424-46 40mm (blank) 42" 1425-42B — —
1-1/4" 1/4" 48" 1421-48 — 40mm (blank) 44" 1425-44B — —
*Nominal after centerless grinding *Nominal after centerless grinding
✓ Brightly Plated
1/4" (keyway)
DELUXE FLEXPRUF STEEL AXLES
3/4" 3/4"
1-3/8" 1-1/8"
1" 1-7/16"
2"
BEARING KITS
DESCRIPTION FOR 1” AXLES FOR 1 1/4” AXLES
Standard Free Spinning Standard
Kit with 2 Hole Flangettes 1861A — —
Kit with 3 Hole Flangettes 1861B 1864 1863
COMPONENTS - EACH
1" Axle Bearing (2) 8211 — —
1 1/4" Free Spinning Bearing (2) — 8209
1 1/4" Standard Bearing (2) — — 8208
ASSEMBLED VIEW Bearing Hanger (2) 8127 8130 8130
Flangette - 2 Hole (4) or… 8212 — —
Flangette - 3 Hole (4) 8213 8217 8217
Bolts - 5/16-18 x 3/4 (6) or (4) 8421 8421 8421
Locknuts - 5/16-18 (6) or (4) 8510 8510 8510
Axle Locknuts - 3/4 - 16 (2) 8516 — —
ST
AN #3
SP
#2
DA 5
AC #35
19
RD
EC
C
CH
HA
HA
AI
IN
IN
N
DESCRIPTION PART DESCRIPTION PART DESCRIPTION PART
10 Ft. Box w/2 Connecting Links 4006-10 10 Ft. Box with 2 Conn. Links 4008-10 #219H x 120 Pitches - Boxed 4397
Reels, up to 250 feet 4006 Reels, up to 500 feet 4008 #219H x 10 ft. - Boxed 4398-10
36" Boxed - with Conn Link 4390 36" Boxed with Conn. Link 4316
48" Boxed with Conn. Link 4318
40" Boxed - with Conn Link 4392 60" Boxed with Conn. Link 4313
48" Boxed - with Conn Link 4391 Connecting Link 4009
Connecting Link 4007 Offset Link 4010
DESCRIPTION #40 #41 #420 #428 #520 #530 GENERAL CHAIN DIMENSIONS & STRENGTH
10 ft. Box with CHAIN ROLLER ROLLER PIN AVERAGE
2 Conn. Links 4014-10 4023-10 4035-10 4038-10 4044-10 4056-10 PITCH
NUMBER DIAMETER WIDTH DIAMETER TENSILE
Reels - per foot 4014 4023 4035 4038 4044 4056
Connector Links 4015 4024 4036 4039 4045 4057 40 1/2 .312 5/16 .156 3,700
Offset Link 4016 4025 4037 4040 4046 4058 41 1/2 .306 1/4 .141 2,000
420 1/2 .306 1/4 .156 3,700
428 1/2 .335 5/16 .177 4,200
Azusa inventories a complete line of industrial and motorcycle 520 5/8 .400 1/4 .200 6,100
chain. Please check with us regarding sizes and types not shown. 530 5/8 .400 3/8 .200 6,100
✓ Machined Face
Hardware Kit for Vari-Hub
Hardware Kit Includes:
1875
TUF-N-TRU (TNT)
.160" Thick
Clear Anodized
#35 Chain
TRU-A-LINE (TAL)
.125" Thick
Blue Anodized
#35 Chain
5/16" Hole,
4 places
1-5/8" 1/4"
Keyway
2" R
✓ Zinc Plated
1/8"
ALUMINUM
CHAIN BOLT MIN.
SPROCKETS SIZE BORE BOLTS CIRCLE TEETH PATTERN PART
#35 1" 3 @ .272 1.687 21 P5256 **(2021-2036)
#35 1" 3 @ .272 1.687 37 P5256 T5313-*
#40 1" 3 @ .272 1.687 17 P5256 T5315-*
#520 1" 3 @ .272 1.687 18 P5256 T5316-*
#35 1" 3 @ .272 1.680 21 P5248 T5313-*
#40 1" 3 @ .272 1.680 17 P5248 T5315-*
#520 1" 3 @ .272 1.680 18 P5248 T5316-*
*When ordering, add no. of teeth to part no. & ALWAYS SPECIFY PATTERN
**2021 thru 2036 part numbers for #35 chain, 21 to 36 tooth
SPROCKET GUARDS
✓ Premium High-Strength Aluminum
✓ 5.25" Bolt Circle
✓ Two Thicknesses
✓ Split or Unsplit (Specify)
*When ordering, add number of Teeth to Part No. & ALWAYS SPECIFY PATTERN
If we don’t have your desired pattern on file, send us a sample hub or old sprocket.
CHAIN SIZE/
Azusa offers the opportunity to order almost any Sprocket, precision
MATERIAL
ROLLER DIAMETER THICKNESS machined with hobbed (not stamped) teeth. Order sprockets drilled
with any pattern from our vast pattern library ranging in the hun-
dreds, for any chain size listed and with most any number of teeth
within the range listed.
All Sprockets are fabricated from premium heat-treated aluminum
1"
alloy.
BORE TO ORDER: In the table below, find your CHAIN SIZE. Choose the
NUMBER OF TEETH you want and add it to the PART NUMBER in
the table below. Finally, if you are ordering a FINISHED Sprocket,
always specify the bolt PATTERN you desire when ordering.
BLANK SAMPLES
FINISHED SAMPLES
“B” TYPE SPROCKETS FOR #35 CHAIN “B” TYPE SPROCKETS FOR #40/41 CHAIN
TAPERED
#35 CHAIN 5/8" BORE 3/4" BORE NO SET SCREW #40/41 CHAIN 5/8" BORE 3/4" BORE
8 — — 2115
8 2101-K* —
9 2123-K* — 2116
10 2124-K* 2138K* — 9 2102 2163 (11/16" BORE)
11 2125-K* 2139K* —
10 2103 2110
12 2126 2140 —
13 2127 2141 — 11 2104 2111
13 2127-K* — —
14 2128 2142 — 12 2105 2112
15 2129 2143 — 13 2106 2113
16 2130 2144 —
17 2131 2145 — 14 2107 2114
18 2132 2146 –– 17 2108 —
20 2133 2147 ––
*All Sprockets on this page with a “K” in their Part Number have a
“B” TYPE SPROCKETS FOR #40 CHAIN key broached into the hub rather than a keyway. No key is needed.
For Honda & other 22mm
For #40 Chain Shafts with 7mm Keyway
5/8" BORE 3/4" BORE 22mm BORE
10° TAPERED “B” TYPE
TEETH PART PART TEETH PART ENGINE SPROCKETS
8 1901-K* —
12 2172 FOR YAMAHA
13 2173
9 — — 14 2174 #35 9 Tooth - 10˚ Tapered Bore w/Keyway 1930
10 — 1919 15 2175 #35 10 Tooth - 10˚ Tapered Bore w/Keyway 1931
16 2176 #219 10 Tooth - 10˚ Tapered Bore w/Keyway 1940
11 — 1920
17 2177 #219 11 Tooth - 10˚ Tapered Bore w/Keyway 1941
SIDE 2
SIDE 1
DIMENSIONAL DIAGRAMS
DIAMETER
DIMENSIONAL DIAGRAMS
1-5/8 R 1-5/8" R
10" or 12" OD 11"
1/4"
1/4"
1"
8418
8527
✓ Heavy Duty Pitman Arms
8134 ✓ Holes for Cotter Pins in Shaft & Bolts
8322
✓ Splined Shaft and Hub for Perfect Alignment
O.E.M.s:
OTHER LENGTHS
8554 8137 AVAILABLE IN
QUANTITY
8140
COMPLETE STEERING SHAFT KITS
ARMS NOT ARMS
LENGTH WELDED WELDED 8554
22" 1868-22 1867-22
24" 1868-24 — 8129
25" 1868-25 1867-25
28" 1868-28 1867-28
34" 1868-34 —
MOUNTING CUP,
PLATED #8135
This spring loaded ground contact switch fits both
7/8" and 1" frame or handle bars. A 36" shielded wire, Gleaming plated steel, this is the perfect mate
AVAILABLE
with a spade type end fitting is assembled for fast for Azusa’s Steering Wheels. Fits either 1-1/2" IN ATTRACTIVE
installation. Plated and a real safety feature for all or 1-5/8" bolt circle, and practically any make SKIN PACK
vehicles. For all you get, it is unbelievably low priced. of steering wheel.
DESCRIPTION PART
1/4-28 Right 8531
DELUXE TYPE - MALE DELUXE TYPE - FEMALE ECONOMY TYPE - FEMALE 1/4-28 Left 8537
RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND 5/16-24 Right 8523
SIZE THREAD THREAD SIZE THREAD THREAD SIZE THREAD THREAD 5/16-24 Left 8529
1/4-28 8250-R 8250-L 8mm Right 8540
5/16-24 8221 8221-L 5/16-24 8220 8220-L 8mm Left 8541
5/16-24 8248 8249
3/8-24 8244 8244-L 3/8-24 8243 8243-L 3/8-24 Right 8512
8mm 8251-R 8251-L 3/8-24 Left 8530
3/8-24 8246 8247 7/16-20 8245 — 7/16-20 Right 8513
For Tie Rods, see page 15
8236
8230
8238
8172
SIDE 1
SIDE 2
8173
8237
8239
8182
8129
8130
8127 8128
8171
8181
SPINDLE AXLES
HUB FOR STEEL DISC 8236 BEARING HANGER, 1-1/4" AXLE 8130 SPINDLE BRACKET, 1/2" KINGPIN 8181
1" ID x 2" OD x 1/2" wide, two 5/16-18 4" x 4-1/4" x 1/4" thick. 5/16" holes 2-1/2" between ears, 1-1/4" clearance
set screw holes, and 1/4" keyway for two and three hole bearing to bolt centerline. 1/4" thick x 1-3/16"
HUB, 1" BORE, LONG 8237 flangette pattern. wide. for 1/2" kingpin.
1" ID x 1-1/2" OD x 2.75" long, with BEARING HANGER, JACKSHAFT 8128 SPINDLE AXLES - UNPLATED
1/4" x 1-5/16" OD shoulder. 1/4" key- 1-3/8" ID x 3" OD w/2" mounting 5/8-18 x 3.75" 8445
way, with set screw hole opposite. edge x 1/4" thick 5/8-18 x 4.50" 8457
TUBE, TAPERED BEARING HUB, 8238 SPINDLE ARM (SIDE 1) 8172 5/8-18 x 6.00" 8472
2" OD x 1.782" ID x 3-5/8" long 3-3/4" x 1" with support wedge 3/4-16 x 3.75" 8444
x 1/8" thick 5/16" bolt hole. 3/4-16 x 4.50" 8458
TUBE, BEARING HUB 8230 3/4-16 x 6.00" 8471
1-5/8" OD x 1-3/8" ID x 3-1/2" long SPINDLE ARM (SIDE 2) 8173
HUB, 1" BORE, SHORT 8239 3-3/4" x 1" with support wedge PITMAN ARMS 8129
1" ID x 1-1/2" OD x 1-1/2" long. (opposite from side one) x 1/8" thick. 5/8" shaft hole, 5/16" bolt hole,
5/16-18 set screw hole w/1/4" keyway. 5/16" bolt hole. 5 ga. (.210") 1-5/8" center to
BEARING HANGER, 1" AXLE 8127 SPINDLE BRACKET, 5/8" KINGPIN 8171 center with 3/16" offset
3-1/2" SQ x 1/4" thick, 5/16" 2-1/2" between ears, 1-1/4" clearance ROD ANCHORS (FOR 1/4" ROD) 8182
hole pattern for two and three to bolt centerline. 1/4" thick 1-3/8" x 3/4" x 8 ga. (.160") thick
hole bearing flangettes. x 1-3/16" wide. For 5/8" kingpin. with 1/4" hole.
(Hardware
Included)
SPLIT COLLARS
KEYS & KEYSTOCK
ID OD WIDTH KW MATERIAL PART
DESCRIPTION PART ONE-PIECE
1" 1-3/4" 1/2" 1/4" Billet Alum. 8578
3/16" x 3/16" x 3/4" 8454 COLLARS (w/o Keyway)
1-1/4 2" 1/2" 1/4" Billet Alum. 8579
3/16" x 3/16" x 1-1/4" 8442 ID OD WIDTH MATL. PART 40mm 2-1/2" 1/2" 5/16" Billet Alum. 8580
3/16" x 1/4" x 1-1/4" 8434 1’ 1-3/4" 1/2" 1/4" Cast Alum. 8570
1/4" 1/2" 5/16" Steel 8562
3/16" x 1/4" x 12" 8404 1-1/4 2" 1/2" 1/4" Cast Alum. 8571
5/8" 1" 3/8" Steel 8555
1/4" x 1/4" x 1-1/4" 8435 5/8" 1-1/8" 1/2" Steel 8554 1 1-3/4" 1/2" 1/4" Steel 8557
1/4" x 1/4" x 12" 8403 1-1/4 2" 1/2" 1/4" Steel 8558
3/4" 1-1/4" 9/16" Steel 8560
5/16" x 5/16" x 12" 8408 1-3/8 2-1/4" 1/2" 1/4" Steel 8559
1" 1-5/8" 5/8" Steel 8565 35mm 2-1/4" 1/2" 5/16" Steel 8553
7mm x 7mm x 12" 8402
Set Screw Included 40mm 2-1/2" 1/2" 5/16" Steel 8552
JACKSHAFT KITS
COMPLETE KITS
DESCRIPTION USE WITH PART
Jackshaft Kit, 5/8" x 10" #35 Chain 1826-10
Jackshaft Kit, 5/8" x 12" #35 Chain 1826-12
Jackshaft Kit, 3/4" x 14" #40 Chain 1824-14
8335
Twice the tensile and burst strength of vinyl DIMENSIONS PART DIMENSIONS PART
and many times the abrasion resistance, this 3/16" ID x 1" OD 8371 3/8" ID x 1-1/2" OD 8375
tough urethane Fuel Line will withstand mil- 3/16" ID x 1-1/4" OD 8372 3/8" ID x 2" OD 8376
lions of flexes. Low kinkage and excellent 1/4" ID x 1" OD 8373 1/2" ID x 1-1/2" OD 8377
grab. The best! 1/4" ID x 3/8" OD. 1/4" ID x 1-1/2" OD 8374 1/2" ID x 2" OD 8378
✓
5
12
For Faring Mounting
✓
5/16
1 To Shock-Mount Engines
6-3/8
8-5/8
COMPONENTS
3-5/16
DESCRIPTION KIT BULK
1
Rubber Grommets 8 8316
1/2 5/16 x 1-1/4" Washers 8 8317
CONDUIT BUTTONS
CLEVISES .316 .260 3/4 7/32 2369
1/4" Hole 1/2" Wide 1-1/8 Thru 3/32 2366 .375 .290 3/4 1/4 2370
1/16" Hole 3/8" Wide 1-1/4 Thru 1/16 8157 GRIP ADAPTER/CABLE GUIDE
.437 x .312 .225 x .100 3/4 3/16 2381
.437 x .312 .275 x .100 7/8 9/32 2394
(For 3/16 Ball) BALL ADAPTERS
1/4 — 1/4 Thru 3/32 2365
1/4 — 3/8 Thru 3/32 2362
CONDUIT RETAINERS - STRAIGHT
9/32 — 1/4 Thru 3/32 2363 5/16-24 .260 2 7/32 2386
3/8 — 3/8 Thru 3/32 2364 5/16-24 .287 2 1/4 2387
FOAM DUMMY
GRIP #2352
CONTROL CABLES
O.E.M.s:
We can make con-
trol cable assem-
blies to your specs
from components
on page 38. Check
with our sales
department. ✓ Excellent Quality
✓ Low Price
CABLE CABLE HOUSING END CAP
APPLICATION LENGTH OD LENGTH OD PART ✓ Installed Conduit Caps
Throttle 54" 1/16" 50" .210 1751
Brake 64" 5/64" 60" .370 1752
Brake 56" 5/64" 52" .370 1753
NOTE:
1700-136 3.0" 700 lbs. 12.0" 11mm / .43"
Part Nos. 1700-136 1700-230 3.0" 650 lbs. 12.0" 12mm / .47"
and 1700-230 have red
springs; Part No. 1700-236 1700-236 3.0" 730 lbs. 12.0" 12mm / .47"
has a chrome spring.
Additional sizes
✓ Single-Chamber Hydraulic
available in ✓ Compact Size Envelope
O.E.M. quantities.
✓ Black Spring
#1700-128 PICTURED
✓ Excellent Value
✓ Chrome-Plated Spring
✓ Mini-Bike Ranges Additional sizes
✓ Quality/Economy
available in
O.E.M. quantities.
#1700-19 PICTURED
The “Draggin Skin” clutch is for all four-cycle kart racers who want consistency in engagement with
flexibility in tuning the clutch. Interchangeable drive sprockets have 13, 14 and 15 teeth. The springs
can be used in sets or mixed. Full instructions included.
DESCRIPTION PART
Bucket Seat Kit, Complete, with Cover 2291
Bucket Seat Kit, Complete, Less Cover 2290
Bucket Seat w/Mounting Hardware Only (no brackets) 8192
Seat Bracket Kit Only 2288
UPHOLSTERED BUCKET SEAT COVERS
Bucket Seat Cover, Deluxe 1645
COMPONENTS
Bucket Seat 8196
Bracket, 19-1/2" Centers 8193
Bracket, 18-1/2" Centers 8194
Bolt, 5/16-18 x 1-3/4" (4 req.) 8407
Locknut, 5/16-18 (4 req.) 8510
Anchor, Expanding (4 req.) 8461
Anchor Bolts, 1/2" x 2" (4 req.) 8462
Clamps (4 req.) 8346
1-3/16" 7/8"
9-7/8"
9-7/8"
¡w ¡w
£2 £2
MOUNTING
HOLE
PATTERNS
DESCRIPTION PART
O.E.M.s: We can manufacture seats
Mini Bike Seat, 12" Plush 1632
or covers to your specs. Please
inquire with our sales department. Mini Bike Seat, 19" Plush 1633
DESCRIPTION PART
DESCRIPTION PART
Folding Foot Pegs, Pair, Packaged 1740 Non-Slip Clamps, Set, 4 Halves Pk’d 2209
Folding Foot Pegs, Pair, Bulk 1739
Folding Foot Pegs, Pair, with Clamps 2239 Non-Slip Clamps, Bulk (Each) 8162
✓ Rugged Construction
✓ No Welding Needed
✓ Economical, Versatile
✓ Most Other Components
On Hand
DESCRIPTION PART
Jig welded from high quality 7/8" O.D. by .083" wall tubing, this Fork
Mini-Bike Frame & Fork Kit 3545
& Frame set is designed to accommodate up to and including 17.5"
Mini-Bike Frame 3548
O.D. mounted tires and comes complete with engine mounting plate,
Mini-Bike Fork & Bolt Set 3546
Includes, in addition to Fork:
front axle holes and rear axle mounting tabs. No additional welding is
Bolt - Fork to Frame, 5/8-18 x 6" 8472 required. Most components needed to complete the mini bike are
Locknut, 5/8-18, Thin, Nylon Insert 8515 available from Azusa’s shelves. Total weight with Fork: 19 pounds.
Sprocket/Drum Assy.
Twist Grips Mini Bike Seats (see page 17)
(see page 39) (see page 45) Brakes (see page 17)
(Suggested Brake
Actuator
Brake Levers Position)
(see page 39)
Forks &
Frames
(see above) Fenders
(see page 40)
Clamps
(see page 45) Chain (see page 23)
48"
41"
KART FRAME WITH
STEERING HOOP #3502
✓ Low Cost - High Quality
✓ No Additional Welding Needed
✓ All Needed Components In Catalog
26" ✓ Steering Hoop & Belly Pan Included
Azusa Brake / Uni-Hub Kit
Kart Seats & Covers (see pg 18, pg 24)
(see page 44)
Steering Wheels
(see page 32)
ENGI
1004 $ 20.75 1104 $ 60.95 1175 $ 52.95 1411-36 $ 47.95 1424-26 $ 87.50
1005 $ 26.95 1105 $ 60.50 1176 $ 51.95 1411-38 $ 49.95 1424-34 $ 88.95
1006 $ 39.50 1106 $ 55.95 1177 $ 51.95 1411-40 $ 52.50 1424-36 $ 89.95
1010 $ 15.50 1107 $ 56.95 1178 $ 49.25 1411-42 $ 54.50 1424-38 $ 90.95
1411-44 $ 56.50 1424-40 $ 91.95
1022 $ 9.95 1108 $ 49.95 1192 $ 35.75
1025 $ 19.25 1117 $ 49.95 1193 $ 39.50 1412-36 $ 47.95 1424-42 $ 98.50
1026 $ 20.25 1123 $ 44.95 1194 $ 39.50 1412-38 $ 49.95 1424-44 $ 98.50
1028 $ 24.95 1124 $ 47.95 1195 $ 39.50 1412-40 $ 52.50 1424-46 $ 105.95
1413-40 $ 52.50
1041 $ 15.95 1125 $ 51.75 1196 $ 39.50 1414-40 $ 52.50 1425B-36 $ 64.95
1042 $ 20.50 1126 $ 51.75 1197 $ 42.95 1425B-38 $ 64.95
1048 $ 18.95 1127 $ 51.75 1198 $ 42.95 1420-40 DISC 1425B-40 $ 66.95
1049 $ 19.75 1128 $ 40.75 1199 $ 42.95 1420-42 $ 65.75 1425B-42 $ 69.95
1050 $ 12.75 1129 $ 40.75 1420-44 $ 67.75 1425B-44 $ 69.95
1051 $ 18.30 1222 $ 26.95 1425B-46 $ 69.95
1130 $ 40.75 1225 $ 71.95 1421-23 $ 61.95
1053 $ 16.95 1131 $ 36.95 1226 $ 59.95 1421-26 $ 69.95 1432-24 $ 74.25
1054 $ 15.75 1135 $ 42.75 1228 $ 57.50 1421-32 $ 71.95 1432-30 $ 74.25
1055 $ 15.75 1136 $ 40.75 1251 $ 94.95 1421-34 $ 72.50 1432-32 $ 74.25
1057 $ 23.60 1137 $ 37.95 1421-36 $ 72.95
1058 $ 22.80 1401-34 $ 42.50 1432-34 $ 74.25
1138 $ 38.95 1401-36 $ 44.50 1421-37 $ 78.50 1432-38 $ 74.25
1059 $ 23.75 1139 $ 31.95 1401-38 $ 46.50 1421-38 $ 78.95 1432-40 $ 74.25
1060 $ 17.85 1142 $ 24.50 1421-39 $ 78.95 1432-44 $ 78.50
1061 $ 24.50 1144 $ 32.50 1401-40 $ 48.50 1421-40 $ 79.50
1062 $ 23.25 1145 $ 24.50 1401-42 $ 50.50 1433-30 $ 74.25
1064 $ 26.25 1401-44 $ 52.50 1421-42 $ 84.95 1433-32 $ 74.25
1146 $ 32.50 1401-54 $ 62.50 1421-44 $ 85.50 1433-34 $ 74.25
1065 $ 25.25 1147 $ 34.50 1421-46 $ 93.50 1433-40 $ 74.25
1066 $ 23.95 1148 $ 32.50 1402-36 $ 44.50 1421-48 $ 93.95 1433-44 $ 78.50
1067 $ 27.50 1149 $ 38.95 1402-38 $ 46.50
1068 $ 22.75 1158 $ 3.95 1402-40 $ 48.50 1422-34 $ 84.50 1440-40 $ 88.75
1069 $ 23.25 1159 $ 4.95 1422-36 $ 84.95 1440-42 $ 90.95
1402-42 $ 50.50 1422-40 $ 89.50 1440-44 $ 90.95
1070 $ 23.95 1160 $ 6.25 1403-30 $ 39.95 1422-42 $ 95.95
1072 $ 28.50 1161 $ 7.25 1403-38 $ 46.50 1422-44 $ 96.50 1521 $ 165.00
1073 $ 26.95 1162 $ 2.75 1403-40 $ 48.50 1422-48 $ 102.95 1523 $ 150.00
1075 $ 24.25 1163 $ 3.40 1525 $ 275.00
1077 $ 29.75 1164 $ 3.90 1423-40 $ 87.95 1531 $ 165.00
1078 $ 26.95 1165 $ 4.40 1409 $ 1.25 1423-44 $ 90.95 1535 $ 275.00
Page 1
Karts and Parts - Price List
1550 $ 85.95 1700-236 $ 31.95 1849-090 $ 25.50 1888 $ 1.70 2021 $ 8.75
1557 $ 32.50 1700-246 $ 31.95 1849-095 $ 25.50 2022 $ 8.75
1585 $ 36.50 1849-099 $ 25.50 1901-K $ 9.60 2023 $ 8.75
1721 $ 4.50 1849-100 $ 25.50 1919 $ 7.95 2024 $ 8.75
1632 $ 32.95 1721-B $ 3.75 1920 $ 8.10
1633 $ 42.95 1731 $ 12.50 1849-105 $ 25.50 2025 $ 8.75
1642 $ 53.50 1732 $ 1.50 1849-107 $ 25.50 1930 $ 14.95 2026 $ 8.75
1643 $ 53.50 1739 $ 5.75 1849-110 $ 25.50 1931 $ 15.50 2027 $ 8.75
1849-115 $ 25.50 1932 $ 15.75 2028 $ 8.75
1644 $ 53.50 1740 $ 6.50 2029 $ 9.50
1645 $ 43.95 1751 $ 2.45 1850 $ 7.95 1940 $ 14.95
1649 $ 50.95 1752 $ 2.95 1855 $ 3.95 1941 $ 15.50 2030 $ 9.50
1651 $ 48.50 1753 $ 2.95 1857 $ 12.95 1942 $ 16.25 2031 $ 9.50
1653 $ 46.95 1754 $ 2.75 1860 $ 5.25 2032 $ 9.50
1952-K $ 9.25 2033 $ 9.50
1654 $ 47.50 1801 $ 24.95 1861-A $ 37.95 1953-K $ 9.75 2034 $ 9.50
1655 $ 42.95 1805 $ 25.95 1861-B $ 38.50
1656 $ 42.95 1806 $ 5.25 1954 $ 6.25 2035 $ 9.50
1660 $ 63.95 1809 $ 4.25 1862 $ 69.95 1955 $ 6.75 2036 $ 9.50
1663 $ 56.60 1863 $ 41.95 1956 $ 6.95 2037 $ 9.50
1810 $ 4.90 1864 $ 44.95 1957 $ 7.50 2038 $ 8.25
1665 $ 32.95 1811 $ 5.25 1865 $ 5.95 1958 $ 8.25 2039 $ 12.50
1666 $ 32.95 1817 $ 2.95 1866 $ 15.95
1669 $ 186.50 1819 $ 3.80 2000-AG $ 15.50 2047 $ 25.50
1670 $ 171.95 1867-22 $ 24.75 2000-BG $ 16.50 2048 $ 25.50
1671 $ 101.95 1820 $ 4.95 1867-25 $ 25.95 2000-CG $ 16.95 2049 $ 25.50
1822 $ 43.95 1867-28 $ 26.50 2000-DG $ 17.95
1672 $ 92.95 1823 $ 23.75 2000-EG $ 19.95 2050 $ 25.50
1673 $ 96.95 1868-22 $ 21.95 2000-FG $ 21.50 2051 $ 26.95
1674 $ 92.50 1824-14 $ 34.95 1868-24 $ 21.95 2000-GG $ 23.95 2052 $ 26.95
1675 $ 32.50 1826-10 $ 28.95 1868-25 $ 22.95 2053 $ 26.95
1676 $ 32.50 1826-12 $ 29.50 1868-28 $ 22.95 2001 $ 25.50 2054 $ 26.95
1826-14 $ 29.95 1868-34 $ 24.50 2002 $ 25.50
1677 $ 177.95 1829 $ 4.25 2003 $ 25.50 2055 $ 29.95
1678 $ 164.95 1830 $ 12.75 1872 $ 18.25 2004 $ 25.50 2056 $ 29.95
1679 $ 99.50 1872-A $ 17.25 2057 $ 29.95
1841-11 $ 10.25 1873 $ 12.65 2005 $ 26.95 2058 $ 29.95
1680 $ 90.75 1841-13 $ 11.25 1874 $ 10.50 2006 $ 26.95 2059 $ 32.50
1681 $ 93.25 1842-11 $ 16.95 2007 $ 26.95
1682 $ 87.50 1842-15 $ 17.50 1875 $ 2.25 2008 $ 26.95 2060 $ 32.50
1691 $ 134.95 1842-24 $ 18.50 1877 $ 7.75 2009 $ 29.95 2061 $ 32.50
1693 $ 149.95 1877-A $ 6.75 2062 $ 32.50
1843-11 $ 9.75 1878 $ 25.95 2010 $ 29.95
1700-15 $ 18.95 1843-15 $ 10.25 1879 $ 44.95 2011 $ 29.95 2084 $ 14.75
1700-19 $ 18.95 1843-24 $ 11.75 2012 $ 29.95 2085 $ 14.75
1700-128 $ 42.95 1844-11 $ 18.95 1883 $ 3.50 2013 $ 29.95 2086 $ 14.75
1700-136 $ 44.95 1844-13 $ 20.95 1885 $ 5.25 2014 $ 32.95 2087 $ 14.75
1700-230 $ 31.95 1887 $ 1.40 2088 $ 15.95
Page 2
Karts and Parts - Price List
2089 $ 15.95 2140 $ 5.95 2196 $ 9.95 2251-B $ 12.25 2296 $ 39.50
2141 $ 6.50 2197 $ 9.95 2252 $ 20.95 2297 $ 26.95
2090 $ 15.95 2142 $ 6.95 2253 $ 10.50 2298 $ 35.95
2091 $ 15.95 2143 $ 7.25 2200 $ 18.25 2254 $ 1.20 2299 $ 36.50
2092 $ 18.50 2201 $ 18.25
2093 $ 18.50 2144 $ 7.50 2202 $ 12.95 2255 $ 13.95 2300 $ 2.10
2094 $ 18.50 2145 $ 7.95 2203 $ 12.95 2255-B $ 13.25 2301 $ 1.95
2146 $ 8.75 2204 $ 17.50 2259 $ 6.95 2302 $ 1.40
2095 $ 18.50 2147 $ 9.50 2259-A $ 7.50 2303 $ 3.75
2096 $ 20.95 2205 $ 17.50
2097 $ 20.95 2151 $ 7.95 2206 $ 10.95 2260 $ 16.95 2304 $ 2.75
2098 $ 20.95 2152 $ 7.95 2207 $ 10.95 2263 $ 1.15 2305 $ 2.50
2099 $ 20.95 2155 $ 7.95 2208 $ 33.50 2264 $ 1.10 2306 $ 2.05
2157 $ 9.95 2209 $ 4.75 2307 $ 2.10
2101-K $ 9.50 2158 $ 9.95 2265-ID $ 22.95 2308 $ 3.50
2102 $ 7.35 2211-ID $ 9.35 2265-OD $ 22.95 2309 $ 0.20
2103 $ 7.85 2161 $ 9.95 2211-OD $ 9.35 2266-ID $ 23.75
2104 $ 8.25 2163 $ 7.25 2213-ID $ 10.95 2266-OD $ 23.75 2314 $ 53.95
2105 $ 8.50 2213-OD $ 10.95 2314-50 $ 6.95
2164-60 $ 16.75 2267-ID $ 35.50 2314-92 $ 10.95
2106 $ 8.85 2164-66 $ 18.50 2217-ID $ 17.95 2267-OD $ 35.50
2107 $ 9.50 2164-72 $ 19.95 2217-OD $ 19.75 2268-ID $ 36.95 2315 $ 63.75
2108 $ 11.65 2218-ID $ 19.95 2268-OD $ 36.95 2315-54 $ 8.25
2110 $ 7.85 2165-66 $ 16.75 2218-OD $ 21.50 2269 $ 33.95 2315-78 $ 11.75
2111 $ 8.25 2165-72 $ 19.95
2220 $ 35.95 2270A $ 33.50 2318 $ 52.50
2112 $ 8.50 2166-40 $ 16.75 2221 $ 34.50 2270S $ 33.50 2318-50 $ 6.75
2113 $ 8.85 2166-54 $ 18.95 2222 $ 34.50 2271A $ 33.50 2318-58 $ 7.75
2114 $ 9.50 2166-60 $ 22.95 2223 $ 35.95 2271S $ 33.50 2318-78 $ 9.95
2115 $ 3.45 2167-54 $ 18.95 2272A $ 33.50 2318-92 $ 11.25
2116 $ 3.65 2168-54 $ 18.95 2224 $ 34.50 2272S $ 33.50
2225 $ 35.95 2322 $ 87.95
2123-K $ 8.75 2172 $ 7.65 2228 $ 108.00 2278 $ 4.95 2322-60 $ 11.50
2124-K $ 8.95 2173 $ 7.85 2229 $ 108.00 2279 $ 4.35 2322-66 $ 12.25
2125-K $ 9.50 2174 $ 8.40 2280 $ 8.95
2126 $ 5.95 2175 $ 8.95 2230 $ 117.75 2281 $ 7.25 2326 $ 3.15
2176 $ 9.60 2231 $ 18.50 2282 $ 33.95 2327 $ 2.35
2127 $ 6.95 2177 $ 10.15 2232 $ 18.50 2283 $ 16.75 2328 $ 2.75
2127-K $ 8.95 2233 $ 12.50 2286 $ 16.95 2329 $ 4.50
2128 $ 6.65 2180 $ 9.50 2234 $ 12.50 2288 $ 15.95
2129 $ 7.25 2181 $ 10.50 2330 $ 5.75
2184 $ 0.65 2235 $ 17.75 2290 $ 62.50 2331 $ 3.20
2130 $ 7.50 2185 $ 9.75 2236 $ 17.75 2291 $ 105.95 2340 $ 0.30
2131 $ 7.95 2186 $ 10.95 2237 $ 11.95 2292 $ 39.75 2341 $ 0.28
2132 $ 8.75 2187 $ 10.95 2238 $ 11.95 2293 $ 45.95
2133 $ 9.50 2239 $ 11.95 2294 $ 54.95 2342 $ 0.32
2138-K $ 8.95 2189-K $ 11.50 2343 $ 0.32
2139-K $ 9.50 2190-K $ 11.75 2251 $ 12.95 2295 $ 38.95 2344 $ 0.30
Page 3
Karts and Parts - Price List
2347 $ 1.20 2530 $ 35.95 2611 $ 30.50 2669 $ 32.50 2728 $ 24.25
2348 $ 1.85 2532 $ 13.75 2612 $ 30.50 2729 $ 24.25
2349 $ 1.95 2533 $ 6.50 2613 $ 30.50 2670 $ 32.50 2730 $ 24.25
2614 $ 30.50 2671 $ 32.50 2731 $ 24.25
2350 $ 12.50 2537 $ 3.50 2672 $ 32.50
2352 $ 23.75 2538 $ 15.95 2615 $ 30.50 2673 $ 32.50 2732 $ 24.25
2359 $ 16.95 2539 $ 0.55 2616 $ 30.50 2674 $ 32.50 2733 $ 24.25
2541 $ 7.95 2617 $ 30.50 2734 $ 24.25
2360 $ 0.65 2542 $ 12.50 2618 $ 30.50 2675 $ 32.50 2735 $ 24.25
2361 $ 0.70 2619 $ 31.95 2676 $ 32.50 2736 $ 24.25
2362 $ 1.00 2550 $ 56.95 2677 $ 32.50
2363 $ 0.75 2551 $ 98.95 2620 $ 31.95 2678 $ 34.95 2823 $ 22.50
2552 $ 103.95 2621 $ 31.95 2679 $ 34.95 2824 $ 22.50
2364 $ 0.90 2555 $ 19.95 2622 $ 31.95 2825 $ 22.50
2365 $ 0.80 2623 $ 31.95 2680 $ 34.95 2826 $ 22.50
2366 $ 0.70 2555-A $ 18.50 2624 $ 31.95 2881 $ 34.95 2827 $ 22.50
2369 $ 0.85 2556 $ 17.50 2682 $ 34.95
2557 $ 1.30 2625 $ 31.95 2683 $ 34.95 2828 $ 24.25
2370 $ 1.35 2558 $ 19.95 2626 $ 31.95 2684 $ 34.95 2829 $ 24.25
2371 $ 1.30 2558-A $ 18.50 2627 $ 31.95 2830 $ 24.25
2372 $ 1.25 2559 $ 18.25 2628 $ 34.95 2699-85 $ 34.95 2831 $ 24.25
2373 $ 1.60 2629 $ 34.95 2699-86 $ 34.95 2832 $ 24.25
2561 $ 14.95 2699-87 $ 34.95
2374 $ 0.55 2562 $ 16.95 2630 $ 34.95 2699-88 $ 34.95 2833 $ 25.25
2375 $ 0.55 2562-A $ 15.50 2631 $ 34.95 2834 $ 25.25
2377 $ 0.82 2564 $ 1.10 2632 $ 34.95 2699-89 $ 38.95 2835 $ 25.25
2379 $ 0.70 2565 $ 14.95 2633 $ 34.95 2699-90 $ 38.95 2836 $ 25.25
2566 $ 16.95 2635 $ 34.95 2699-91 $ 38.95
2380 $ 0.80 2566-A $ 15.50 2699-92 $ 38.95 3502 $ 140.00
2381 $ 0.65 2653 $ 28.95 2699-93 $ 38.95 3545 $ 104.95
2383 $ 0.46 2600-AG $ 19.50 2654 $ 28.95 3546 $ 27.50
2386 $ 0.95 2600-BG $ 20.75 2655 $ 28.95 2699-94 $ 38.95 3548 $ 79.50
2387 $ 1.15 2600-CG $ 21.50 2699-95 $ 38.95
2600-DG $ 22.50 2656 $ 28.95 2699-96 $ 38.95 3800 $ 87.95
2390 $ 0.60 2600-EG $ 24.95 2657 $ 28.95 2699-97 $ 38.95 3801 $ 48.50
2391 $ 0.45 2600-FG $ 26.50 2658 $ 28.95 2699-98 $ 41.95 3802 $ 10.85
2392 $ 0.60 2600-GG $ 27.95 2659 $ 28.95 2699-99 $ 41.95 3803 $ 2.70
2394 $ 0.80 3807 $ 3.95
2602 $ 28.50 2660 $ 28.95 2699-100 $ 41.95
2512 $ 18.50 2603 $ 28.50 2661 $ 30.95 2699-102 $ 45.75 3812 $ 1.35
2513 $ 18.50 2604 $ 28.50 2662 $ 30.95 2699-104 $ 45.75 3813 $ 1.75
2514 $ 11.95 2605 $ 28.50 2663 $ 30.95 2699-114 $ 49.50 3814 $ 2.15
2515 $ 11.95 2664 $ 30.95 3815 $ 2.60
2606 $ 28.50 2723 $ 22.50
2516 $ 19.25 2607 $ 28.50 2665 $ 30.95 2724 $ 22.50 3816 $ 0.85
2517 $ 19.25 2608 $ 28.50 2666 $ 30.95 2725 $ 22.50 3817 $ 0.85
2518 $ 13.75 2609 $ 30.50 2667 $ 30.95 2726 $ 22.50 3818 $ 0.95
2519 $ 13.75 2610 $ 30.50 2668 $ 30.95 2727 $ 22.50 3819 $ 1.30
Page 4
Karts and Parts - Price List
3820 $ 0.60 4056 $ 3.45 7022 $ 47.95 7065 $ 31.75 7139 $ 12.50
3821 $ 1.50 4056-10 $ 3.50 7023 $ 32.95 7066 $ 46.50 7140 $ 9.25
3822 $ 2.50 4057 $ 1.10 7024-2 $ 29.95 7141 $ 8.75
3823 $ 2.75 4058 $ 1.95 7071-2 $ 8.75
7025 $ 73.50 7072 $ 13.95 7142 $ 16.75
4001 $ 2.35 4099 $ 4.65 7026-2 $ 42.50 7073 $ 8.95 7143 $ 4.95
4001-10 $ 2.40 7027 $ 46.95 7074 $ 11.25
4002 $ 0.60 4147 $ 3.40 7028 $ 46.95 7075 $ 17.50 7146 $ 6.25
4003 $ 1.30 4147-10 $ 3.45 7029 $ 23.95 7077 $ 11.25 7147 $ 5.95
4006 $ 3.75 4148 $ 0.85 7078 $ 9.95 7148 $ 7.25
4006-10 $ 3.80 4149 $ 1.70 7030-2 $ 42.75 7149 $ 15.95
7031 $ 27.50 7088 $ 35.95 7150 $ 5.95
4007 $ 0.60 4313 $ 8.80 7032 $ 14.75 7090 $ 15.95 7151 $ 6.95
4008 $ 1.80 4316 $ 4.75 7033 $ 16.95 7091 $ 11.75
4008-10 $ 1.85 4318 $ 7.50 7034 $ 17.95 7092-2 $ 39.25 7164 $ 15.95
4009 $ 0.45 7093 $ 27.95 7168 $ 17.95
4010 $ 0.90 4390 $ 11.50 7035 $ 10.95 7169 $ 24.50
4391 $ 16.95 7036 $ 13.75 7094 $ 28.95
4014 $ 1.95 7037 $ 15.95 7095 $ 42.95 7900 $ 5.95
4014-10 $ 2.00 4392 $ 12.50 7038 $ 14.25 7096 $ 46.95 7908 $ 8.75
4015 $ 0.46 4397 $ 32.95 7039 $ 17.95 7097 $ 14.10 7909 $ 8.75
4016 $ 1.10 4398-10 $ 9.95
7040 $ 27.50 7116 $ 9.95 7910 $ 8.75
4023 $ 1.80 4801 $ 3.30 7041 $ 20.95 7118 $ 8.95 7911 $ 8.25
4023-10 $ 1.85 4802 $ 0.75 7042 $ 21.50 7119 $ 13.25 7912 $ 8.25
4024 $ 0.45 4899 $ 25.95 7043 $ 24.95 7913 $ 9.50
4025 $ 0.90 7044 $ 25.95 7120 $ 11.75
7002 $ 48.95 7045 $ 18.50 7121 $ 6.75 7914 $ 9.50
4035 $ 2.15 7003-2 $ 11.75 7046 $ 16.50 7122 $ 7.95 7915 $ 9.50
4035-10 $ 2.20 7004-2 $ 17.50 7123 $ 6.50 7916 $ 16.25
4036 $ 0.60 7005 $ 14.75 7046-8 $ 25.95 7124 $ 8.25 7921 $ 11.50
7047 $ 13.50
4037 $ 1.44 7007 $ 45.95 7048 $ 20.95 7125 $ 6.95 8001 $ 15.25
4038 $ 2.82 7008-2 $ 11.50 7049 $ 15.50 7126 $ 9.95 8003 $ 15.50
4038-10 $ 3.00 7009 $ 29.50 7127 $ 9.25 8009 $ 30.75
4039 $ 0.71 7010-2 $ 27.50 7050 $ 20.95 7128 $ 6.50 8011 $ 22.05
7051 $ 29.50 7129 $ 4.50 8014 $ 22.70
4040 $ 1.20 7011-2 $ 11.50 7052 $ 20.95
4041 $ 3.45 7012 $ 12.50 7053 $ 14.50 7130 $ 5.50 8020 $ 19.10
4041-10 $ 3.50 7013 $ 31.95 7131 $ 5.50 8021 $ 19.10
4042 $ 0.71 7014 $ 13.25 7055 $ 72.95 7132 $ 5.25
7015 $ 30.95 7056-6 $ 32.25 7133 $ 5.25 8050 $ 7.95
4043 $ 1.31 7057-2 $ 13.50 7134 $ 6.95 8052 $ 11.50
4044 $ 4.45 7016-2 $ 26.75 7058 $ 24.50 8053 $ 11.50
4044-10 $ 4.50 7017-2 $ 34.75 7135 $ 7.25 8054 $ 15.95
4045 $ 1.10 7018 $ 15.50 7060 $ 27.50 7136 $ 6.75
4046 $ 2.10 7019 $ 79.95 7061 $ 41.95 7137 $ 10.75 8061 $ 10.50
7020 $ 22.95 7062 $ 42.75 7138 $ 15.75 8062 $ 4.50
Page 5
Karts and Parts - Price List
8100 $ 22.50 8175-10 $ 4.95 8219 $ 2.30 8256 $ 3.20 8330 $ 0.95
8101 $ 23.75 8175-12 $ 5.25 8220 $ 3.25 8257 $ 1.65 8332 $ 3.30
8110 $ 7.25 8175-14 $ 5.50 8220-L $ 3.25 8258 $ 4.20 8333 $ 0.60
8175-16 $ 6.50
8116 $ 1.20 8221 $ 5.95 8260 $ 20.50 8334 $ 5.75
8118 $ 6.30 8178 $ 5.50 8221-L $ 5.95 8261 $ 27.50 8335 $ 0.12
8178-2 $ 6.50 8262 $ 24.00 8336 $ 4.75
8120-8 $ 5.00 8179 $ 22.50 8222 $ 1.65 8263 $ 39.95 8337 $ 4.10
8120-10 $ 6.00 8224 $ 2.15 8265 $ 8.25 8338 $ 0.95
8121-7 $ 4.75 8181 $ 2.80 8225 $ 2.15 8271 $ 0.65 8339 $ 1.40
8182 $ 0.40
8121-9 $ 5.50 8183-10 $ 7.75 8227-090 $ 10.00 8275-11 $ 2.75 8340 $ 0.25
8127 $ 3.25 8183-14 $ 9.95 8227-095 $ 10.00 8275-15 $ 3.50 8341 $ 0.22
8128 $ 2.25 8183-19 $ 11.95 8227-099 $ 10.00 8275-24 $ 4.50 8342 $ 1.95
8129 $ 1.20 8227-100 $ 10.00 8276-11 $ 4.50 8343 $ 0.22
8184 $ 10.50 8276-13 $ 4.75
8130 $ 3.75 8185 $ 15.95 8227-105 $ 10.00 8344 $ 0.38
8134 $ 5.30 8186 $ 14.95 8227-107 $ 10.00 8282 $ 0.80 8345 $ 1.55
8135 $ 1.40 8187 $ 24.75 8227-110 $ 10.00 8283 $ 0.95 8346 $ 0.32
8136 $ 4.75 8227-115 $ 10.00 8347 $ 0.10
8190 $ 5.95 8301 $ 0.20 8348 $ 0.30
8137-6 $ 8.75 8191 $ 9.95 8228 $ 6.95 8302 $ 0.05
8137-22 $ 9.50 8192 $ 44.95 8229 $ 5.95 8303 $ 0.14 8351 $ 0.40
8137-24 $ 9.50 8193 $ 7.95 8230 $ 3.00 8304 $ 0.15 8352 $ 0.32
8137-25 $ 10.50 8194 $ 7.75 8235 $ 5.75 8305 $ 0.20 8353 $ 0.03
8137-28 $ 10.50 8196 $ 37.50 8354 $ 3.55
8137-34 $ 11.75 8236 $ 4.45 8307 $ 0.45
8201 $ 1.55 8237 $ 6.95 8308 $ 0.20 8355 $ 0.20
8138 $ 14.50 8202 $ 5.95 8238 $ 12.50 8309 $ 0.45 8356 $ 2.75
8139 $ 19.95 8203 $ 2.90 8239 $ 5.60 8310 $ 1.45 8357 $ 3.25
8140-22 $ 14.50 8204 $ 1.60 8358 $ 5.90
8140-25 $ 15.50 8205 $ 1.95 8243 $ 3.75 8311 $ 2.10 8359 $ 2.60
8140-28 $ 15.50 8243-L $ 3.75 8312 $ 5.25
8206 $ 1.80 8244 $ 5.95 8313 $ 3.75 8360 $ 2.95
8142 $ 46.95 8207 $ 4.30 8244-L $ 5.95 8316 $ 0.22 8361 $ 2.95
8147 $ 12.50 8208 $ 11.25 8317 $ 0.10 8362 $ 3.25
8148 $ 8.95 8209 $ 13.75 8245 $ 10.95
8149 $ 28.95 8210 $ 3.50 8246 $ 5.95 8320 $ 3.20 8363 $ 2.30
8247 $ 5.95 8321 $ 2.60 8364 $ 1.60
8155 $ 16.50 8211 $ 7.95 8248 $ 6.50 8322 $ 0.10 8366 $ 1.05
8157 $ 0.65 8212 $ 0.94 8249 $ 6.50 8323 $ 2.60 8368 $ 1.65
8162 $ 0.85 8213 $ 1.15 8324 $ 1.90
8214 $ 29.95 8250-L $ 6.50 8371 $ 0.09
8171 $ 2.50 8250-R $ 6.50 8325 $ 1.35 8372 $ 0.10
8172 $ 1.50 8215 $ 0.56 8251-L $ 7.50 8326 $ 1.35 8373 $ 0.08
8173 $ 1.50 8216 $ 4.25 8251-R $ 7.50 8327 $ 3.10 8374 $ 0.18
8217 $ 1.80 8253 $ 2.40 8328 $ 0.20 8375 $ 0.16
8175-4 $ 4.50 8218 $ 3.95 8254 $ 2.95 8329 $ 0.32 8376 $ 0.20
Page 6
Karts and Parts - Price List
8377 $ 0.16 8446 $ 1.22 8489 $ 0.18 8534 $ 0.11 10122 $ 41.95
8378 $ 0.26 8447 $ 1.80 8490 $ 0.15 8535 $ 0.50 10123 $ 43.50
8448 $ 0.28 8491 $ 0.20 8536 $ 0.42 10124 $ 49.95
8402 $ 1.95 10125 $ 52.25
8403 $ 1.30 8449 $ 0.28 8492 $ 0.30 8537 $ 0.45
8404 $ 1.10 8451 $ 2.35 8493 $ 0.28 8539 $ 0.11 10131 $ 44.25
8405 $ 0.16 8454 $ 0.27 8494 $ 0.12 10132 $ 54.95
8455 $ 1.00 8540 $ 0.35 10133 $ 56.75
8406 $ 0.25 8456 $ 1.75 8495 $ 0.16 8541 $ 0.88 10134 $ 63.25
8407 $ 0.22 8496 $ 0.12 8552 $ 5.50 10135 $ 65.50
8408 $ 1.95 8457 $ 1.72 8497 $ 0.06 8552-PK $ 6.50
8409 $ 1.10 8458 $ 2.25 10151 $ 52.75
8459 $ 0.34 8498 $ 0.32 8553 $ 6.75 10152 $ 60.50
8410 $ 0.09 8499 $ 0.54 8553-PK $ 7.95 10153 $ 61.95
8411 $ 1.50 8460 $ 0.12 8500 $ 0.03 8554 $ 1.00 10154 $ 68.50
8412 $ 0.59 8461 $ 0.90 8501 $ 0.08 8555 $ 1.10 10155 $ 70.75
8413 $ 0.09 8462 $ 0.55 8502 $ 0.05
8463 $ 0.08 8503 $ 0.15 8557 $ 4.05
8414 $ 1.00 8557-PK $ 5.25
8415 $ 0.13 8464 $ 0.24 8505 $ 0.26 8558 $ 4.85
8416 $ 0.10 8465 $ 0.29 8508 $ 0.04 8558-PK $ 5.95
8418 $ 0.04 8466 $ 0.40 8509 $ 0.28
8419 $ 0.03 8467 $ 0.36 8510 $ 0.05 8559 $ 4.50
8511 $ 0.96 8559-PK $ 5.50
8420 $ 1.95 8468 $ 0.40 8512 $ 0.06
8421 $ 0.18 8469 $ 0.54 8513 $ 0.45 8560 $ 1.00
8422 $ 0.14 8470 $ 0.10 8514 $ 0.12 8562 $ 0.74
8423 $ 0.75 8470-F $ 0.18 8515 $ 0.25 8565 $ 1.50
8424 $ 1.65
8425 $ 0.45 8471 $ 3.60 8516 $ 0.58 8570 $ 4.35
8428 $ 2.15 8472 $ 2.20 8517 $ 0.65 8570-PK $ 4.60
8473 $ 1.50 8518 $ 2.20 8571 $ 4.65
8432 $ 0.10 8474 $ 0.14 8519 $ 0.05 8571-PK $ 5.35
8433 $ 0.15
8434 $ 0.31 8475 $ 0.14 8521 $ 0.75 8578 $ 6.25
8435 $ 0.43 8476 $ 0.12 8523 $ 0.05 8578-PK $ 7.25
8478 $ 0.12 8524 $ 0.35 8579 $ 6.25
8436 $ 0.12 8479 $ 0.68 8525 $ 0.50 8579-PK $ 7.25
8437 $ 0.22
8438 $ 0.17 8480 $ 0.10 8526 $ 0.06 8580 $ 8.75
8439 $ 0.82 8481 $ 1.20 8527 $ 0.30
8482 $ 1.40 8528 $ 0.32 10101 $ 26.50
8440 $ 0.10 8483 $ 0.12 8529 $ 0.30 10102 $ 36.50
8441 $ 0.17 8484 $ 0.12 10103 $ 38.25
8442 $ 0.29 8530 $ 0.40 10104 $ 44.50
8444 $ 2.10 8485 $ 1.20 8531 $ 0.05 10105 $ 46.95
8486 $ 1.15 8532 $ 0.50
8445 $ 1.40 8487 $ 0.22 8533 $ 0.12 10121 $ 31.95
Page 7
Karts and Parts - Price List
NOTE: Finished Sprockets are fully machined to a specified bore and mounting bolt hole pattern.
Blank Sprockets have simply a stock 1" bore, ready for your final machining. The tables below have
both finished and blank sprocket numbers by chain. When ordering please follow catalog instructions.
Page 8