Beruflich Dokumente
Kultur Dokumente
a) Gloves
b) Face shield
c) Overall coat
d) All of above
6) What are the dimensions of the metal sheet used for the Tool Box?
a) 410 x 410 mm
b) 10 x 10 inches
c) 450 x 450 mm
d) 12 x 12 inches
7) What procedure was used for joining sides to already bended portion of the
Tool box?
a) Arc Welding
b) Riviting
c) Gas welding
d) Resistance Welding (Spot Welding)
8) What was the sequence for fixing the Handle, Latch & Hasp?
10) To fasten the sheet metal with steel nail the -------------- is used.
a) Rivet Pliers
b) Pliers
c) Punch
d) Stappler
a) Carperter’s Hammer
b) Ball peen Hammer
c) Mallet
d) Sledge Hammer
14) The bench vice is used to -----------the metal sheet firmly during shaping
operations.
a) Cut
b) Bend
c) Hold
d) Break
e) None of above
22) The ----------- is used to hold the material firmly during cutting and shaping
operations.
a) Bending machine
b) Clamping machine
c) Notching machine
d) Bench-vise
e) None of the above
23) Metal cutting -----------are used with steel-headed hammers for chipping or
cutting material
a) Hacksaw
b) Chisels
c) Punch
d) Files
24) The spot welding machine works by a combination of
a) Sheet metal and electrodes
b) Heat and spark
c) Pressure and temperature
d) Heat, pressure, and time
e) None of the above
25) A drill bit is used to cut circular holes of metal sheet and it is made of
a) High Carbon Steel
b) Pure Iron
c) Wood
d) Rubber
e) None of the above
26) The speed of a drill depends on
a) The size of the work.
b) The diameter of the hole required.
c) The length of the drill being used.
d) The shape of the hole required.
28) Both hasp and latch (staple) are fastened on the tool box with
a) Nut & Bolt
b) Screws
c) Welding
d) Rivets
e) All of the above