Beruflich Dokumente
Kultur Dokumente
(HITES)
(Subsidiary of HLL Lifecare Ltd., A Government of India Enterprise)
E-TENDER
FOR
Design, supply & installation of Signages
For Proposed New Construction of Phase II Paediatric Cardiac
Hospital building (GRIHA 3 star), Hostel Block & Underground
Parking on Ring Road of Civil Hospital at U.N. Mehta Institute of
Cardiology & Research Centre, Ahmedabad, Gujarat
Volume- IV
TECHNICAL SPECIFICATIONS
1. SCOPE
a. This document covers the architectural design concepts, technical
specification & suggested details for the manufacturing of the signage.
Detailed designing, construction, fabrication, assembling including painting,
finishing, cladding electrical work etc. should be carried out by the vendor and
shall conform in all respects to high standards of design, engineering &
workmanship.
b. The drawing given with the tender for different signage elements is indicative.
The detailed fabrication drawing, shop drawing, mock ups, Flex materials
cladding / fixing details, design to fit size should be developed by the vendor
and submitted to UNMICRC/HITES for approval. The vendor shall develop
the prototype for each category as per the approved drawing, graphic detail
and submit to UNMICRC/HITES for approval. Prototype should be offered
for inspection and approval complete in all respects including fabrication of
frame/structure, painting, electrical work, cladding, graphic application,
including testing and functioning of the sign complete in all respects.
c. Detailed assessments and provision should be made for ease of internal &
external maintenance.
2. BASIS OF DESIGN
a. All signage covered under this specification shall be good for installation and
operation in UNMICRC at Ahmedabad, Gujarat in India.
b. All signage, except where specified as indoor, shall be good for outdoor
installation without any shade/cover/protection.
c. All illuminated signs shall be suitable for operation from dusk to dawn
everyday throughout the year.
e. LED lights of required wattage and numbers shall be placed in such a manner
to achieve uniform lighting of the signage (min one LED light (4ft) size per 4
sqft area). It shall be ensured that no dark patches, hot spots, shadows and
light leaks appear when the lights are turned on.
f. The design of signage shall facilitate easy maintenance & re-lamping. The
maintenance doors/panels should remain water/dust tight during normal usage.
a. The signage supplied by the vendor shall conform in all respect to the standard
listed below. Latest editions of these specifications shall be referred.
b. Electrical works
i. The wires running inside the signage box shall not run/hung loose. The
wires shall be taken inside the Conduit / PVC sleeve and all cable shall be
saddle properly, which shall be properly supported. All wiring should be
numbered with ferrules.
ii. It shall be possible to maintain & replace, light fittings, chokes etc. inside
the signage, without dismantling the signage by providing adequate space
inside the signage and providing suitable removable entry/access
doors/covers.
iii. Rubber grommet shall be used at the circuits for entry of wires to the sign
box.
iv. All lighting work shall be completed in all respects even if not indicated
and spread of light should be uniform.
v. All the electrical equipment except lighting fixtures to be located inside the
signage board shall be weatherproof and suitable for outdoor duty.
vii. Junction box should be provided at suitable places for the backlit signages.
viii. In addition, work shall also conform to the requirements of latest editions
/amendments of the following:
c. Powder coating
Standards for Powder coating (Pure Polyester based powder to be used for
powder coating of all frames ) are as follows:
Prior to painting, surface should be free of any visible loose particles, welding
spatters or foreign bodies. The structural hollow tube should be treated with
seven tank treatment for removal of grease in the degreasing tanks, cleaning of
surface with water in Rinsing tank, acid treatment in pickling tank , cleaning
of surface inwater tank & treatment of surface with chromate & phosphate.
Surface should be suitably cleaned to achieve require finish as per relevant
ASTM standard. The DFT for the powder coating should be between 70 -100
micron.
Prior to painting, surface should be free of any visible loose particles, welding
spatters or foreign bodies. The surface preparation for painting shall be made
by thoroughly descaling & cleaning of surface for application of paint .
The primer shall be one coat of zinc phosphate of 35 micron DFT. Second
coat of primer shall be of high build MIO (50 micron) . The total thickness for
the primer coat shall be 85 micron DFT.
Finish shall be with PU coat in not less than two coats. Paint to be mixed as
per manufacturer specification to get the required colour. Apply the paint in
two or more coats to achieve 80 micron DFT (40 micron DFT each coat).
The first coat of primer must be applied on dry surface immediately and in any
case within 4 hrs of surface treatment. Applied paint shall have required Dry
Film Thickness (DFT) after drying. Each coat shall be in a proper state of cure
or dryness before the application of succeeding coat. Manufacturer’s
instruction shall be followed for intercoat interval.
All welded joints shall be buffed and coated with stripe coat of Zinc phosphate
& epoxy zinc phosphate primer prior to taking up the finished coat.
Any part of mild steel portion below ground level shall be painted with three
coat of red lead paint.
4. COLOURS
Colour of the signage shall comply with approved shades. Vendor shall submit colour
samples of vinyl film & paint to obtain clearance before proceeding with the
art/painting work for all relevant signage.
5. TESTING OF MATERIALS
All the materials shall be procured from approved manufacturer as per the
specification and shall be accompanied by Manufacturer Test certificate.
6. INSPECTION OF WORK
Vendor to facilitate to carry out the inspection of materials, works, fabrication at their
works and at the site during the installation by UNMICRC/HITES representative as
per the scope of work.
The flex used in making the sign face shall conform to the following specifications
Property Value
Thickness 0.056cm +/- 0.005
Gloss at 60° 17.5 +/- 10
Whiteness Index 110 +/- 10
Color L*=90, a*=+70, b*=11.5
Light Transmission 26 +/- 2%
Tear strength
Weft -13kg/cm
Warp - 18kg/cm
Tensile strength
Weft -24kg/cm
Warp - 24kg/cm
Flammability ASTM E-84 class - I
U.L recognition UL-48 recognized for sign accessories
Along with the above, the flexible substrate should bear a watermark clearly showing
the brand and material type. The flex should be coated on both sides with a dirt
resistant coating.
Property Value
Tensile Strength 0.8-0.9 kg/cm at 23°C
Applied Shrinkage Max 0.5mm
Service Temperature -40°C to +75°C
Adhesion Strength Arcylic,
Uncoated,clear Polycarbonate 0.5 kg/cm
Film Characteristics
Film Description 0.050mm translucent vinyl
Thickness film & adhesive 3 to 4 mil (0.08 to 0.010mm)
Adhesive type & color
Permanent pressure sensitive clear adhesive
Liner Synthetic liner
Warranty:
• The Authorized Contractor’s final bills would be cleared only on submission of the
duly endorsed Warranty Documents that fulfill all the above conditions.
1. Vinyl signboards
Board material Aluminium composite panel (3mm, 0.3mm Aluminium sheet with PVDF
coating) with 1.5” X 1.5” Square MS pipe (16 gauge) with PU coated frame with vertical
support for every 4 ft. Vinyl lettering 3M 3630 / 3650 series , 7725 series
Job scope includes fabrication, transportation and installation at site using PCC.
Main frame for the box 1.0” square MS pipe (16 gauge) with PU coating.
Tensioning system Klick rail system with Allen key bolt (mechanical tensioning)
Back panel 24 gauge pre coated GI sheet
Top, Bottom & Side panels 16 gauge Aluminium sheet, powder coated
Electricals 4 ft Philips/GE tubes with copper chokes/ starters of Philips/ GE
Flex 3M Panaflex
Vinyl 3 M 3630 series
Reflector Light enhancement film
Laminate 3M 8519 series laminate
Job scope includes fabrication, transportation and installation at site in all respects including
grouting in PCC
Sprout material Aluminium composite panel (3mm, 0.3mm Aluminium sheet with PVDF
coating) with 1.5” X 1.5” Square MS pipe (16 gauge) frame with PU coating with vertical
support for every 4 ft.
Job includes Fabrication and supply of sprouts in Aluminum Composite Material (ACP) and
installing them on sheds & Gates with frame as per requirement. (Refer picture).
Area of the rectangle that can contain the sprout will be considered for payment.
5. Reflective signboards
Board material Aluminium composite panel (3mm, 0.3mm Aluminium sheet with PVDF
coating) with 1” X 1” Square MS PU coated / powder coated (14 gauge)
frame with vertical support for every 4 ft.
Vinyl 3M Reflective H I grade
Laminate 3M 8519 series laminate
Job scope includes fabrication, transportation and installation at site as required in 1:2:4 PCC.
6. MS Square Pipe
3” X 3” (14 Gauge) with two coat of PU paint of approved shade as per the specification for
the support structure for installing the sign boards.
7. MS Square Pipe
2” X 2” (20 Gauge) with two coat of PU paint of approved shade as per the specification
for the support structure for installing the sign boards.
A INTERNAL SIGNAGES
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Sr.
NAME OF ITEM DESCRIPTION OF ITEM Code Image Requirement for Area
No.
WFA1B
Directory Signage
Roll-up Standee :
Design, Composition, Supply & Installation of Size : 3’ x 6’ OPD Waiting, Floor
Ft. PU Coated Aluminium Section with heavy spring wise Waiting Area,
Exhibition
7 mechanism, base stand, lock key to facilitate easy ED Information of
Displays
changing of banners with Echo Solvent Black back Flex Preventive Cardiac
Printing , top side media holding section with end caps, Care
carry bag.
3 M Double Sided Acrylic
Supply of 3M Tap It is a black, 1 inch modified acrylic
adhesive with a very conformable, foam core. It can replace
rivets, welds and screws. The fast and easy to use
permanent bonding method provides high strength and
long-term durability. It offers design flexibility with its
viscoelasticity and powerful ability to bond to a variety of
surfaces.
• Fast and easy-to-use permanent bonding method
provides high strength and long-term durability • Virtually
invisible fastening keeps surfaces smooth • Can replace
mechanical fasteners (rivets, welding, screws) or liquid
adhesives Pasting for Signages
8 Adhesive Tap AT
• Black, 1inch , modified acrylic adhesive and very Material
conformable acrylic foam core bonds to a wide variety of
substrates including powder coated paints and irregular
surfaces
• Eliminate drilling, grinding, refinishing, screwing,
welding and clean-up
• Creates a permanent seal against water,
moisture and more by offering better gap filling capabilities
• Pressure sensitive adhesive bonds on contact to
provide immediate handling strength
• Allows the use of thinner, lighter weight and
dissimilar materials
Supply of High performance Volume floor marking tape is
premium quality Reflective PVC tape, which uses an
aggressive pressure sensitive rubber -based adhesive
system . it combines excellent mechanical strength , easy
9 Floor Marking Tap transversal tear-ability and abrasion resistance with Fire safety, Patient
excellent conformability for use in lane marking and flooring guide Way Finding,
application . excellent resistance to abrasion , corrosion Staircase, Car Parking
and moisture with a higher abrasion and mechanical As per NABH & MCi
resistance . suitable for indoor and protected outdoor Requirement Signages
environments.
(1) 1 Inch. FM1
(2) 2 Inch. FM2
(3) 3 Inch. FM3
Auditorium, promotion
Design, Composition, Supply & Installation of Snap fit of Staff, Various Event,
frames, made of aluminium extruded profiles duly anodized Lectures’ Room, CME,
13 Snap fit Frame SFF
also provided with digitally printed vinyl pasted on 1mm Notice Boards, etc. As
acrylic sheet. per NABH & MCi
Requirement
Waiting Area,
Design, Composition, Supply & Installation of Digitally Auditorium, Institute
printed vinyl with lamination on HP latex machine Vision Mission,
Sandwich Display sandwiched between 5mm Acrylic sheet & 3mm Acrylic Fire Safety Guideline,
15 SDS
Signage sheet with design Printed on 3M 1220 series, Sign to be Map etc.
fixed on wall with stainless steel projected 25mm studs as As per NABH & MCi
per approved by the Institute. Requirement
Design, Composition, Supply & Installation of display box of
size 12 inch. x 6 inch
Character height will be 4inch, Multi Counter Type LED
base 4-digit token Display with facility to display counter
16 Token Display TD OPD Waiting
number, keypads, transmission cables, printed paper token
issuing unit, necessary software. Display to be fixed on
Wall to be fixed with SS Screw. Hanging Display also
included with chain.
Design, Composition, Supply & Installation of display box of
size 48 inch. X 12 inch
Remote Operation Facility Size : Approx 9 Inch. font size
Single colour Bright LED based Moving Message Display,
Moving Message multilingual type, with Aluminium frame, wall
17 MMD Both Building Entry
Display mounted/hanging facility, auto message display schedule
facility, clock/date display, with GSM Modem unit to enable
changing of messages from remote location. Display to be
fixed on Wall to be fixed with SS Screw. Hanging Display
also included with chain.
(1) Design, Composition, Supply & Installation of Frosted
Film : 3M™ CRYSTAL Glass Finishes 7725SE-324 FG1
Frosted CRYSTAL
FG5
B EXTERNAL SI GNAGES
END OF VOLUME – IV
(LAST PAGE)