Beruflich Dokumente
Kultur Dokumente
10. The rigid bars AB and CD shown in Figure MODB 4.3 are
supported by pins at A and C and the two rods. Determine 12. A compound shaft consisting of a steel segment and an
the maximum force P that can be applied as shown if its aluminum segment is acted upon by two torques as
vertical movement is limited to 5 – 0.05n mm. shown in Figure MODB 5.1. Determine the maximum
permissible value of T subject to the following conditions;
τST ≤ 83 + n MPa, τAL ≤ 55 + nMPa, and the angle of
rotation of the free end is limited to 6°. For steel, G = 83
GPa and for aluminum, G = 28 GPa.