Beruflich Dokumente
Kultur Dokumente
Display: Bar graph level display, 10% tank height per bar. Warning: If the equipment is likely to come in to contact with aggressive
substances, then it is the responsibility of the user to take suitable precautions This product is to be used only on domestic oil tanks within the parameters
Early warning indication (flashing tank fill)
that prevent it from being adversely affected, thus ensuring that the type of
2 TANK PREPARATION
outlined in the specifications. Any use of the product on applications that
at a predetermined height above tank bottom protection is not compromised. Aggressive substances; - e.g. liquids or gases lie outside a domestic environment is done so at users own risk. Please note- it is important to keep all items dry
(see section 11). Tank empty warning flashes that may attack metals, or solvents that may affect polymeric materials.
red LED at a predetermined height from tank Read fully before installation and use during installation.
1234
In order to minimize the risks of electric shock,
bottom. (see section 11) Meets EN60335. A) Pre-drilled tanks.
i The receiver is for indoor use only, never use outdoors.
There may already be a 32mm pre-drilled opening in the
Max 200m in normal “line of sight” conditions. i The receiver is a sealed unit; do not attempt to open it. tank top and possibly a tube fitted. If so, remove the cover
communication The effective range of this product can be
by undoing the two screws holding it in place, and dispose
distance: influenced by external sources that may reduce the Check level,
range of the transmitter or sensitivity of the receiver. Supplied by Kingspan Environmental distance Drill Apply Measure of the tube in accordance with local government guidelines.
180 Gilford Road, Portadown, Co. Armagh, Northern Ireland and Height Tank Base Tank NB – Ensure the hole is a minimum DIAMETER 30mm.
5678
Power supply: Receiver: 150-250V, 50-60HZ. Safety Information
Choose a suitable
Transmitter: 3-voltlithium cell. Do not replace in a potentially explosive atmosphere
B) Un-drilled tanks. position for transmitter 2
Periodically check that the unit is intact and securely fastened to the tank.
Battery life: 3 years (estimated life). Check with the manufacturer on the chemical compatibility prior to use. Where drilling is required to fit the
Do not attempt to repair this equipment. It must be returned to the transmitter, choose a flat level point
Wireless com: 433 mHz. FM transmission.
manufacturer for repair. Pair the Fit Check that is at the same level and no higher
EN 300-220, FCC part 15. Warning! Electrostatic hazard! Clean only with damp cloth. Set Dip Receiver & Transmitter the than any opening at the top of the
Dimensions: Receiver: 50 x 55 x 35mm (not including aerial). Use only VARTA CR2430 batteries. Switches Transmitter to the Base level tank (filling point etc.). (See Picture 2) Outlet
Not suitable for pressurised containers. Use on tanks vented to atmosphere. Incorrectly
Transmitter: 70x93mm. positioned
Max and min Operating temp. Range -10º to +60 º C. The Transmitter can’t sit at an WatchmanSonic
operating temp. Operating humidity: 0-100%. Warranty: 1 year. angle as this gives an incorrect Fill
(transmitter): Sealed airtight unit made from level reading on the receiver. Take Point
,.