Sie sind auf Seite 1von 16

by A.G.

Pulie Pty Ltd

CONCRETE FINISHING TOOLS & EQUIPMENT

w w w. m a s t e r f i n i s h . c o m . a u
CONCRETE FLOOR FINISHING TROWELS
POINTED TROWEL
POINTED TROWEL
“A” Handle Tool Blade Gauge
Handle A: Used for trowelling concrete
Moulded Plastic 101A 120x365 Light
floors or similar work. The curve of the
blade end allows for the reduction of 103A 120x365 Heavy
blade end marking. The moulded plastic
handle is designed for ease of grip and 109A 100x355 Light
(191A) operator comfort. 161A 120x660 Heavy

Tool Blade Size Guage 165A 115x600 Light

101B 120 x 356 Light 191A 115x405 Light

“B” Handle 109B 100 x 355 Light 192A 115x450 Light


Wood 191B 115 x 405 Light 193A 115x500 Light

Handle B: This traditional turned timber NOTE: Trowel 161A has


handle suits applications such as tapered width
(101B) trowelling solvent based products that
may attack plastic handles.

SQUARE TROWEL
SQUARE TROWEL Tool No. Blade Size Guage
102A 280 x 120 Light
Used where the pointed end trowel is not
suitable eg finishing stair toppings and 162A 280 x 120 Heavy
kerb & gutter. 181A 115 x 405 Light

Cement Rendering and plastering

PP73 365 x 120 Light

450S120 450 x 120 Light

500S120 500 x 120 Light

600S120 600 x 120 Light

350S150 350 x 150 Light


(102A)
400S150 400 x 150 Light

COVING TROWEL
COVING TROWEL
Used to form a cove where a wall and floor meet. The 201 coving has a traditional
use in ‘rubbing up’ the setting concrete prior to steel trowelling. If the concrete
is left with the finish created by the coving trowel ie a more textured finish than a
steel trowelled finish, this is known as a coving finish or ‘stipple’ finish.
H
Tool No. Radius Width Height
201 25 145 70
Rad 202 25 145 32
W
(201) 203 12 95 25
207 75 140 90

COVING TROWEL
STEEL FLOATS
Used to ‘rub up’ a concrete floor prior to steel trowelling or to work in coloured dry shake. They produce a textured finish smoother than a wood float,
which suits outdoor paving applications. The trowels feature a long wearing robust steel blade that is turned up all round.

(209)
(219) 160 X 210 (229)
150 x 380 stainless steel blade 290 X 100

1
CONCRETE FLOOR FINISHING TOOLS
MAGNESIUM BLADE FLOATS
(MF20)
MAGNESIUM BLADE FLOATS Tool Size
Used to produce a textured finish MF12 300 x 80
smoother than wood float. A robust and
MF16 405 x 80
long wearing tool with a slightly curved or
broken in blade. MF20 510 x 80
(MF16)

VEE JOINTER
VEE JOINTER Tool Width Depth
Used to form ‘dummy’ joints in concrete 301 75 10
paving. The joint in the concrete reduces the 304 75 19
thickness of the paving and if cracking occurs,
the crack should be at the line of the ‘dummy’ 305 75 25
joint. The depth of the ‘dummy’ joint 306 75 32
should be 1/5 of the slab thickness. 302 150 12
The tools are formed from long 312 150 20
(302) wearing steel and have
315 150 25
ro b u s t , c o m f o r t a b l e (304)
W D
handles.

EDGERS
Tool Radius Width Length Depth
(406) EDGING TOOLS 401 5 75 140 12
402 6 75 140 12
Used to trowel a smooth finish to slab
403 10 75 140 19
Radius edges and produce a smooth face
404 5 38 140 12
margin to textured or wood float finish
external paving. The range encompasses 405 5 50 140 12
a variety of edge radii and blade widths 406 6 100 150 14
to suit an extensive range of applications. 406F 10 75 140 40
D
L The blades are formed from steel. 408 19 80 140 19
W
Stainless steel is used on Tool Nos. Stainless Steel
401S 402S and 403S and 700 through 401S 5 75 140 12
to 708. 402S 6 75 140 12
403S 10 75 140 19
Large Size for Kerb and Gutter Work etc.
700 12 150 230 24
701 25 150 230 24
702 12 112 175 22
703 25 112 175 19
(708) 706 10 105 150 14
708 20 140 200 19
709 20 140 200 22

VARIABLE MARGIN TOOL FIXED MARGIN TOOL


Tool 777 TOOL WIDTH MARGIN
Tool 776
Grooving bit adjusts to 775 140 100
desired width of margin 776 140 150
between 70-160mm
777 120 70 to 160

Width
Margin

2
WOOD FLOATS
WOOD FLOATS
These are widely used traditional tools that produce a textured finish for external paving
Tool Size
as well as applications in cement rendering.
801 112 x 300
(824) 802 112 x 380
803 112 x 450
(801) 804 50 x 450

The floats feature a long wearing hardwood face and a lightweight, but tough, orange 824 65 x 600
plastic handle that is adhered to the timber to eliminate marking from screw fixing.

STEP AND RAMP TOOLS


STEP NOSING NON-SLIP GROOVE FORMING
F0R STEPS AND RAMPS
Tool Radius
501 6 (903) No. of Groove
Tool Grooves Size
502 10
901 3
The step nosing tools are made from
stainless steel and also have application in 903 5
forming external corners on cement render. 904 1 16 x 6
2 at 19mm
905 16 X 6
apart
STEP NOSING
Tools nos. 901 and 903 form semi-
Tool Radius circular corrugations at 9 mm
(905)
601 6 centres.

The step riser tool is formed from Tools Nos. 904 and 905 form 8 mm
steel. The angle is set to produce x 16 mm a recess that is filled with
a 20 mm undercut on a 150 mm non-slip grit.
riser.

PLASTERER’S TOOLS
PLASTERER’S SQUARE PLASTERER’S HAWK
Used in conjunction with a Tool Size
straight edge to scrape a 1038 300sq.
corner and can be locked at
1039 330sq.
the desired angle and depth (1035) 1040 400sq.

Plasterers hawks are made with a light but tough


aluminium plate, a screw in plastic handle and a
sponge hand cushion.

EDGING TOOLS NOSE AND CORNER TOOL


(1020)
Plasterers edging tools have a (1030) Tool Type Size
stainless steel blade and are 1030 External 33 x 33
formed to cut a sharp edging
1031 External 33 x 20
around steel door jams or similar
situations 1033 Internal 28 x 28

Plasterers internal and external


corner tools have a stainless
steel blade formed to the
traditional pencil round.
(1023) (1033)

3
POOL FINISHING TOOLS
STEEL MARBLE SHEEN TROWEL PLASTIC MARBLE SHEEN FLOAT
(120A) (127)
TOOL SIZE (mm)
120A 300
121A 350
122A 450 The blade is made from 3 mm thick low-density white
Originally developed for use on marble
sheen finishing in swimming pools, the 122S 450 with 330 Rib polyethelene and is fixed to a light weight plastic handle.
blade is allowed to flex with only a short 122SS 122S with Square Back Originally developed to trowel marble sheen in swimming pools,
support rib (see tools Nos. 120A, 121A, but now finds a wider use on various wall applications
126A 555
122A & 126A).

A further development from this is a


126S 555 with 380 Rib
FLEXIBLE CUTTER
126SS 126S with Square Back
similar trowel with a longer rib for greater The blade is made from a flexible spring steel and the tool
rigidity in the blade (see ‘S’ series) is used to cut and scrape spraycrete to desired shape in
swimming pools and similar applications.
(122SS)
(125)

(122S)

KERB & FORMWORK EQUIPMENT


KERB & GUTTER PROFILE TROWELS
KGCT – The steel blade is
KGT – The steel blade is shaped
shaped to finish a gutter
to finish 150 mm kerb with a 38
crossing with a 40 mm lip.
mm splay and give a 25 mm
radius to the kerb nosing and
gutter coving

KGE – The steel blade is shaped to finish the


KGC – The steel blade is shaped to nose of the kerb with a 25 radius.
finish the coving in kerb and gutter
with 25 mm radius

150

KGP 2 – Kerb Plate cut to shape


from steel plate to form 150 mm
KGB - Kerb Bow formed from 30 150 kerb and used in construction
mm x 10 mm steel bar and shaped with kerb bow. If 150 mm straight
to form up 150 mm splayed kerb kerb is required, the plate can be
using 50 mm thick timber. placed to form it.
180

FORMWORK SUPPORT
STEEL PEGS RFBA - Adjustable Bracket RFB - Slab Edge Rebate Form Bracket
Machined from a tough 30 mm diameter steel bar and Bracket is adjustable to suit Manufactured to make the task of forming
drilled with 5 mm diameter holes, staggered at 90º to 35mm to 50mm timber the 150 mm brickwork rebate on house
allow nail fixing of timber formwork. floor slabs with ease.
TOOL LENGTH Suitable for use with 50 mm timber
SP18 450 formwork.

SP24 600 (RFB)


(SP18) (RFBA)
SP30 750

4
CONCRETE SCREEDS & STRAIGHT EDGES
FIXED POSITION HANDLE SCREEDS
Tool Length(mm)
F12 1200
F15 1500
F18 1800
F21 2100
Traditional 50 x 36 aluminium box section F24 2400
with one radius and one sharp cutting
F27 2700
edge. The handle fixes to the top of the
screed. Fitted with end plugs and powder F30 3000
coated for ease of clean up. F36 3600

VARIABLE POSITION CLAMPED HANDLE SCREED- Available with level vial


Clamp Clamp with
‘Clamp on’ style handle, which Length(mm)
Tool level vial
may be reversed to the working
face for second use. Fitted with 1200 C12 C12L
end plugs and powder coated for 1500 C15 C15L
ease of clean up.
1800 C18 C18L
NB: Size 4200 to 4800 may not be 2100 C21 C21L
sufficiently rigid for close tolerance
CLAMP HANDLE 2400 C24 C24L
work.
SCREED
2700 C27 C27L
3000 C30 C30L
3600 C36 C36L
CLAMP HANDLE
NB 4200 C42 C42L
SCREED WITH
ADJUSTABLE 4500 C45 C45L
LEVEL VIAL
4800 C48 C48L

PATENTED LEVEL VIAL (ADJUSTABLE)

LIGHT WEIGHT ALUMINIUM STRAIGHT EDGE


Length Powder Coated Mill Finish
(mm) (White) (Plain)
MILLED FINISH 1200 P12 P12P
1500 P15 P15P
1800 P18 P18P
2100 P21 P21P
2400 P24 P24P
2700 P27 P27P
3000 P30 P30P
3600 P36 P36P

POWDER COATED Light weight accurate straight edge – measures 70 x 19.


FINISH Uses include ruling cement render, tiling and as a general
construction straight edge. Fitted with end plugs and
powder coated for ease of clean up, or in mill finish.

5
CONCRETE SLAB FINISHING
WALKING TROWEL
Trowel concrete floors from a standing TOOL LENGTH FEATURES
position. The tubular connection pivots
444 440 Round Ends
(555) freely to allow the changing angle between
the blade and handle to occur. 555 600 Round Ends
556 600 One Square End
The square end blade allows trowelling
up against a wall STAINLESS STEEL

Used in conjunction with telescopic 557 600 Round Ends


(556) handle 1076 or clip handle 588 558 600 One Square End

FRESNO TROWELS
TOOL: 606 – 600mm Blade
(606) The illustration shows the standard fitting which can be locked at the desired angle.
With this fitting the Fresno may also be used as a walking trowel by locking the fitting
parallel to the blade.

TOOL: 607 – 600mm Blade


The Fresno may be fitted with a bracket and tilt mechanism as illustrated – used only
(607) in a push/pull operation

TOOL: 609 -900mmBlade


A larger version of Tool No. 607

ALUMINIUM BULLFLOAT
Features
TOOL LENGTH (mm) · Long wearing aluminium alloy blade
1062 600 · Low maintenance
· Radius on blade corners reduces end marking
1063 900 · Gives concrete a smoother wet finish
(1063)
1064 1200 · Makes final finish easier

1065 1500 BLADE OPERATION:


1068 1800 The tilt of the blade is adjustable and controlled by twisting the handle.
This enables the operator to change the tilt of the blade (continuously if
required) to achieve the optimum finish to the concrete. If the blade lies
flat on the slab it leaves a rough finish but will close and fill holes. When
the blade is tilted on an angle, a smoother finish will result. There is no
need to raise or lower the handle, simply twist it for best results.

LIGHTWEIGHT FINISHING BROOMS


HAIR AND FIBRE BRISTLE TIMBER STOCK (1574) TOOL LENGTH (mm)
The brooms use a quality hair and fibre bristle.
1974 900
TOOL LENGTH (mm) 1904 900 replacement
1572 600
1573 750
1574 900
NYLON BRISTLE ALUMINIUM STOCK
Fitted with 360 degree adjustable bracket
(1974) (Reg Design No. 123595)
Replacement brush Tool No1904

Please note that all the tools on this page are used in conjunction with the Master Finish telescopic handles or use the 588 clip together handle.

6
TELESCOPIC HANDLES
TELESCOPIC HANDLE & CLIP TOGETHER HANDLE
TOOL: 1076 TELESCOPIC HANDLE (1076) (588)
Extends from 2.75 m to 5 m.
Widely used for many floating and finishing jobs enabling the work to be
achieved from a standing position, external from the concrete slab. TOOL: 588
The inside tube is grooved. A pin penetrates this groove. This allows the CLIP TOGETHER HANDLE
twisting action the operator applies to the handle to be transferred to the
floor. The handle length is locked by lightly twisting the collet nut. 2 meters long.

The handle also features a removable clip on steel tube adaptor The aluminium tube is fluted to enhance
(part No. 1076E). This allows the operator to unclip the grip. The inserted end tube is zinc plated steel,
handle from the tool for cleaning, storage or to fit to swaged down to fit neatly on the shaft of a bull float,
another tool. Additional adaptor tubes 1076E may walking trowel, or broom bracket.
be purchased for this purpose.
Three or four of these handles may be aligned together to
give a reach of 6 to 8 metres.
(1076E)
To obtain a 7 m reach, a 588 clip handle can be clipped
onto the 1076 telescopic handle.

Fits bullfloats, brooms, walking trowels and Fresno trowels

WARNING – When using telescopic handles and long length of clip together handle, near to electric wires or other
high voltage installations, care should be taken to avoid contacting live wires as such contact may be lethal.

EXPANDED MESH CONCRETE ROLLER


TOOL ROLLER SIZE Better Finish
010 914 The action of the expanded metal rollers close the aggregate, at
the same time inducing a low frequency vibration into the concrete.
This reduces the surface tension of the mortar leaving a thin film of
latence on the surface

Sizes Available
Roller widths – 914mm

SOLID ROLLER WATER SPRAY


TOOL ROLLER SIZE Hose adapter &
cut off valve
1045 114 x 450 (EAGGUN)
1046 114 x 600
1047 114 x 750 1100mm

(1045)
Spray Heads

ADHESIVE SPEADERS
These trowels have a 1.6 mm thick steel blade
and timber handle.

QTF has a 10 mm square tooth for applications


requiring a thick bed of adhesive such as
quarry tiles.

QTF 2 has a 6 mm saw tooth for areas where (QTF 2)


(QTF) less adhesive is required.

7
CONCRETE PLACING RAKES
CONCRETE PLACING RAKES - timber or aluminium handles available
R500 Blade size 480 mm x 120 mm – push or pull
TOOL DESCRIPTION
concrete with the square or formed side of the blade.
R500 500mm blade no hook
R500H Blade size 480 mm x 120 mm – push or pull
500mm blade with
concrete with the square or formed side of the blade R500H
reinforcement hook
– has a steel finger welded to the blade to hook the
reinforcement steel. (R500H) R500T 500mm notched blade no hook

R500T Blade size 500mm - push or pull concrete.


Notched blade allows less resistance when moving
concrete.

(RH Alum) - Aluminium


(R500)
(R500T)
(RH) - Timber

FOAM FLOATS
1155 Sponge Foam Float features (1156)
(1155) 1156 Foam Float has
lightweight plastic handle and an additional feature of
aluminium backing plate. perforated aluminium
1155R Replacement foam - may backing plate for ease of
be fixed using contact cement cleaning the foam after
use.

STANDING BRACKET STEEL FLOATS


(SB) 219W - 150 x 380

(219W) 209W - 160 x 210

SB Standing Bracket – This bracket may be attached to the handle of Steel floats that are used with
tools such as the 302 Groover or the 702 Edger, to allow for the fitting 1076 or 588 handle for rubbing
of a 1076 or 588 handle. The tools can then be used in positions that in dry shakes toppings or
are difficult to reach, or simply from a standing position. stencil pattern concrete.
(209W)

DISH DRAIN OR COVING TOOLS 45º BEVEL EDGER


(413 & 414)
(206) (466)
413 45° Bevel Edger –
100mm wide x 25mm bevel

414 45° Bevel Edger –


206 – semi circle 466 - Stainless steel part circle 125mm wide x 25mm bevel
- 50mm radius - 75mm radius

FLOOR SCRAPERS
Long handle scrapers feature replaceable hardened steel blades and durable construction. Choose a scraper to suit your application.

LHS – 190 mm wide blade – heavy stock to impact hard to remove


material on floors – spare blade LHSB7

FS6 – 150 mm wide blade – light weight – spare blade FS6B

FS14 – 355 mm wide - lighter gauge blade to suit greater coverage


of less difficult to remove deposit – spare blade FS14B

8
CONCRETE TROWELLING MACHINE
REPLACEMENT BLADES
COMBINATION BLADES
Combination Blades – designed to be used for both initial floating and final finishing

10-66
Use on 34” Master Finish machines that are equipped to receive it.
Fit using 10-62 countersunk square neck screw and 10-63 nut
Blade size – 322mm x 187mm
Weight – 5Kg per set of 4 blades
Packed – 2 Sets per bundle

S34-18
Use on 34” Master Finish machines.
Fixed with 3/8” BSW bolts – lengths are 1½”, 2”, 2½” depending on the model
Blade size – 322mm x 187mm
Weight – 8Kg per set of 4 blades
Packed – 1 Set per bundle

S36-10
Use on 36” Bartell and Wacker machines.
Fixed with 5/16” UNC HT bolts – lengths vary
Blade size – 355mm x 190mm
Weight – 7Kg per set of 4 blades
Packed – 1 Set per bundle

S40-18
Use on 40” Master Finish machines.
Fixed with 3/8” BSW bolts– lengths are 1¼”,1½”, 2”, 2½” depending on the model
Blade size – 375mm x 202mm
Weight – 9Kg per set of 4 blades
Packed – 1 Set per bundle

10-69
Use on 40” Master Finish machines that are equipped to receive it.
Fit using 10-62 countersunk square neck screw and 10-63 nut.
Blade size – 375mm x 200mm
Weight – 6Kg per set of 4 blades
Packed – 2 Sets per bundle

S46-18
Use on 46” & 48” Master Finish, Bartell and Wacker machines.
Fixed with 5/16” UNC HT bolts – lengths vary
Blade size – 450mm x 187mm
Weight – 10Kg per set of 4 blades
Packed – 1 Set per bundle

9
CONCRETE TROWELLING MACHINE
REPLACEMENT BLADES
FLOATING BLADES
Floating Blades – These blades are designed to clip over the finishing blades and are used for initial
floating of the concrete floor. Blade styles, FB34, FB36, FB40 & FB46 are manufactured in two parts
that bolt together, this allows the reuse of the top plate after the wear plate has worn out.

NB. Spare bolt and nut sets – 8 off – part number ‘FBBS’
FB34
Clips over D34-3 finishing blade
Blade size – 330mm x 202mm
Weight – 10 Kg per set of 4 blades
Packed – 1 Set per bundle

Replacement wear plate FB34WP


Weight – 6 Kg per set of 4 blades
Packed - 2 sets per bundle

FB36
(wear plate not shown) Clips over D36-2 finishing blade
Blade size – 357mm x 202mm
Weight – 10 Kg per set of 4 blades
Packed – 1 Set per bundle

Replacement wear plate FB36WP


Weight – 6 Kg per set of 4 blades
Packed - 2 sets per bundle

FB40
(wear plate not shown) Clips over D40-2 finishing blade
Blade size – 375mm x 230mm
Weight – 10 Kg per set of 4 blades
Packed – 1 Set per bundle

Replacement wear plate FB40WP


Weight – 6.5 Kg per set of 4 blades
Packed - 2 sets per bundle

(wear plate not shown) FB46


Clips over D46-2 finishing blade
Blade size – 470mm x 250mm
Weight – 13 Kg per set of 4 blades
Packed – 1 Set per bundle

Replacement wear plate FB46WP


Weight – 7.75 Kg per set of 4 blades
Packed - 2 sets per bundle

10-68
Fits over D40-2 finishing blade and is
secured by wire tie around blade arm of
the machine
Blade size – 375mm x 202mm
Weight – 7.5 Kg per set of 4 blades
Packed – 1 Set per bundle

10
CONCRETE TROWELLING MACHINE
REPLACEMENT BLADES
FINISHING BLADES
Finishing Blades – These blades are manufactured from hardened and tempered carbon steel and are
used where a finer finish is required on the concrete, for example, warehouse floors. The blades are
reversible so that when the edge is worn, they may be turned around for a second use.

D34-3
Use on 34” Master Finish machines.
Fit using 3/8” BSW bolts.
Blade size – 324mm x 152mm
Weight – 4.5 Kg per set of 4 blades
Packed – 1 Set per bundle

D36-2
Use on 36” Bartell and Wacker machines.
Fixed with 5/16” UNC HT bolts – lengths vary
Blade size – 355mm x 152mm
Weight – 4.25 Kg per set of 4 blades
Packed – 1 Set per bundle

D40-2
Use on 40” Master Finish machines.
Fixed with 3/8” BSW bolts.
Blade size – 375mm x 202mm
Weight – 6 Kg per set of 4 blades
Packed – 1 Set per bundle

D46-2
Use on 46” & 48” Master Finish, Bartell and Wacker machines.
Fixed with 5/16” UNC HT bolts – lengths vary
Blade size – 455mm x 152mm
Weight – 6 Kg per set of 4 blades
Packed – 1 Set per bundle

USING DUAL BLADE SYSTEM

Float blade clipped to Remove float blade And Finish floor using
finishing blade for initial reversible finishing blade
floating of floor

11
CONCRETE TROWELLING MACHINES
“G SERIES” - COMBINATION OR DUAL BLADE MODELS
FEATURES

NEW
* Sealed Base - robust sealed base and tilting
mechanism minimises maintenance costs.
MODEL
* Balance - low centre of gravity ensures stability and
balance for better finishing, reduced operator fatigue
and backache.

* Adjustable handles - wide handles with adjustable


height ensure operator comfort and ease of control.

* Safety - runaway prevention switch , plus vee belt,


clutch guard and blade guard.

* Heavy duty - durable finish for quick cleanup and


lasting good looks.

* Finger tip blade tilting mechanism control.

* Ease of control with blade tilt, throttle and cutout


switch mounted on handlebar stem.

* Site Handling - optional crane hook is standard.

* Jockey wheel - standard for ease of


manoeuvring.

* Sprayer holder - for applying water &


carrying extra weight - standard.

* Sprayer not included

BLADE STyLES
• Combination Blades • Dual Blades

or
Plus

s34-18 s40-18 Clip Over Reversible Finish


Float Blade Blade

MODEL CHOICE

34” & 40” machines powered by Honda GX160, 5.5HP motor

Description HP Ring Diameter Weight Blade Choice Model Code

S34-18 Combination G34C


34” Fixed Ring Guarded 5.5 900mm 70Kg
D34-3 Finishing G34F
S40-18 Combination G40C
40” Fixed Ring Guarded 5.5 1060mm 75Kg
D40-2 Finishing G40F

12
CONCRETE TROWELLING MACHINES
“H SERIES” COMBINATION OR DUAL BLADE

BLADE STyLES
• Combination Blades

or

10-66 s34-18

• Dual Blades

Plus

Clip Over Reversible Finish


Float Blade Blade

MODEL CHOICE

34” & 40” machines powered by Honda GX160, 5.5HP motor 48” machines powered by Honda GX200, 6.5HP or GX240, 8HP motor

Description HP Ring Diameter Weight Blade Choice Model Code

10-66 Combination H10-66


34” Fixed Ring Guarded 5.5 900mm 70Kg S34-18 Combination HS34-18
D34-3 Finishing HD34-3FG
10-69 Combination H10-69FG
40” Fixed Ring Guarded 5.5 1040mm 75Kg S40-18 Combination HS40-18FG
D40-2 Finishing HD40-2FG

48” Fixed Ring Guarded S46-18 Combination 46-H6.5S


6.5 1190mm 85Kg
D46-2 Finishing 46-H6.5D
48” Fixed Ring Guarded S46-18 Combination 46-H8S
8 1190mm 96Kg
D46-2 Finishing 46-H8D

13
CONCRETE & TERAZZO FLOOR GRINDING MACHINE

(1)
Complete ease of control
achieved by using the finger light
wheel height adjustment

(2)
Powered by 2 HP Single phase
electric motor which can be
connected to normal household
supply.

(3)
Fitted with 25mtr, 25amp electric
cable

(4)
(5) Two men can handle the machine
onto the most awkward job site
Robust fabricated
steel construction
(6)
Minimum maintenance - 2 greasing
points only

(7)
A vacuum hose can
be connected to the
machine to remove any
air-born dust

(8) (9)
• Lifting bracket included
Supplied with fabric Can be fitted with a variety of disks to
dust shield suit most types of abrasive segments.
(Standard disc as illustrated - self
locking wedge segments).
Specifications:
Code G1 - A Carb Grinding Diamond Grinding
Weight 85 kg Block Block

Disc Speed 360 rpm (029) (D/RUBS)

Disc Diameter 360 mm


Overall size (mm) 940 x 520 x 950

14
MANUFACTURED IN AUSTRALIA BY

a.g. pulie pty. ltd.


A.C.N. 000 864 308
6 WENTWORTH ST, GRANVILLE N.S.W. 2142 P.O. BOX 309, GRANVILLE N.S.W. 2142
TELEPHONE: (02) 9637 9011 FAX: (02) 9682 1269 EMAIL: sales@masterfinish.com.au

w w w. m a s t e r f i n i s h . c o m . a u

SYDNEY BRISBANE MELBOURNE PERTH ADELAIDE


PH: (02) 9637 9011 PH: (07) 3893 2877 PH: (03) 9460 5700 PH: (08) 9350 6255 PH: (08) 8326 2336

Das könnte Ihnen auch gefallen