Beruflich Dokumente
Kultur Dokumente
Cost
100 PC PC for Dell $300 $10 $33000
networking
100 Network A card which Intel $10 $1000
Interface connect pc
Card
5 Ethernet Connect pcs Intel $110 $510
hub
Total Cost $34510
IP Calculation:
Class A addresses have their first octet in the range 1 to 126 (binary address begins with
0).
Class B addresses have their first octet in the range 128 to 191 (binary address begins
with 10).
Class C addresses have their first octet in the range 192 to 223 (binary address begins
with 110).
Network design:
Determine how many Windows servers you will need. Assume that you will buy new machine(s)
to house the Windows server(s), configure and price it (them). If you used routers (not required)
remember that they do not allow broadcast among subnets, what may affect this decision. Decide
what services to install: DNS, DHCP, etc. Explain and justify your decisions.
Answer:
I need 1 window server to connect 100 PCs. The cost of server usually $5000 to $6000.
DNS/DHCP services can be installed as an optional service during the NetWare 6.5 installation
routine. It can also be installed as a post-installation task through iManager. When you install
DNS/DHCP services as an optional product during the server installation, the eDirectory schema
is extended to support a variety of DNS and DHCP-related object. These object help keep track
of IP addresses, DNS and DHCP servers, configurations, host addresses, zones, and the like.
With DNS/DHCP services installed on the network, an IP client can establish a connect
with the network by leasing an IP address from a pool of available addresses, rather than
requiring that the workstation be assigned a fixed address individually. This makes IP address
Once connect to the network, the IP client can automatically detect available DNS name
serves, through which it can translate domain names – for example, ww.wnovell.com into its
corresponding IP address ( for example, 1337.65. 168.1). This enables the client to communicate
with the server properly. Domain names are a benefit to the human users of computers, not the
iManager.
VLANs work like subnets, but keep in mind that they are not actual subnets. VLANs are
created by switches. Subnets are created by IP address and subnet mask assignments. It protect
Describe how each machine will be named (you can make it whatever you want) and how IP
addresses will be assigned to each machine and how name resolution will take place. Assume
that there will be only one Internet domain assigned -- test.org to the company you are designing
the network.
Answer:
The default settings enable all the machines connecting to the AirPort network to share the base
station’s internet account. By default, the base station providers IP address to each machine
dynamically and uses NAT protection to isolate the IP addresses of each machine from the
connation to the internet. To choose this option, click the “Share a single IP address (using
DHCP and NAT)” radio button. Then select the range of address that should be assigned to each
device on the network using the pop-up menu. In most cases, the “Use 10.0.1.1 addressing”
option will work, but you can choose a different range if you want to.
If you want to use a specific set of IP addresses, check the “Share range of IP addresses
(using only DHCP)” check box and enter the starting and enabling IP numbers you want to
assign. As machines connect o you network, these IP address are assigned to each machine that
connects (you have to have enough address in the range so one is available for each machine.
Use the “DHCP lease” box and pop-up menu to set the number of hours for the DHCP lease on
each machine. When this time passes, a new address is assigned to each machine. You can enter
Name resolution techniques ranging from the single LMHOSTS files to the Windows Internet
Name service (WINS) for NETBIOS names and HOSTS files and the Domain Name System
(DNS) service for IP names. For most networks, such as those that have UNIX, Linux, or
Window computers, the name resolution method works different. However, ads a whole new
dimension to name resolution. The active directory stores objects that can represent everything
from a user account to a resource on the network, such as a computer or printer. In a similar
fashion, Novell Directory Services – NDS, now called the eDirectory – is a directory-based
solution for locating resources on the network. If you employee Window 2000 Servers resource.
If you r network is NetWare-based, “overview of the Novell Bindery and Novell Directory
Services,”