Beruflich Dokumente
Kultur Dokumente
G Small footprint
The ZoneSentinel Series is engineered 4X rated enclosure which can easily be switch which checks the monitoring circuitry
specifically for application at distribution drilled for cable access. ZoneSentinel units and an audio alarm silence switch.
boards and small service entrance locations. are easy to wall mount and flush mounting is
ZoneSentinel devices provide cost effective, also an option, should this be required. The optional power filter, for the
high capacity power surge protection and, Individual modules are available upon request. ZoneSentinel range, which is tested to
when used at a local panel in combination ANSI/IEEE C62.41 and is UL 1283 listed,
with a ZoneMaster at the service entrance, LED status indication is supplied with has a noise attenuation of just 75dB at
provide the lowest suppression voltages ZoneSentinel units as standard - normally 100KHz to 100MHz. The filter module will
available today. open/normally closed contacts change attenuate 6kV transients down to a mere
state to indicate a fault. These contacts can 200V without the support of other surge
ZoneSentinel units offer a 90kA surge be employed in a variety of applications from components.
handling capability with protection be-tween turning on lights remote from the surge
Line to Neutral, Line to Ground, Line to Line protector, to interfacing with intelligent ZoneSentinel units are UL 1449 2nd Edition
and Neutral to Ground and no restriction to building management systems. Listed.
the amount of load current. Patented
thermal and short circuit fusing mechanisms An optional remote monitoring unit is
are also included as an additional safety available for the ZoneSentinel range, capable
feature. of monitoring the status of all panel mounted
surge protectors in the facility. This unit
ZoneSentinel is modular in construction with provides audio and visual indication of
individual modules bolted to a large surge protector status in one compact
return plate to minimize transient wall mounting case. Other
impedance. These modules, with a UL 94-5 features of the remote
rated plastic casing, are supplied mounted monitoring unit
within a durable, corrosion resistant, NEMA include a test
AC Power
Protection
Specification
All figures typical at 77°F (25°C) unless otherwise stated
Power filter
Maximum continuous operating voltage
400Vac rated (L-N)
Let-through voltage Figure 2 Connection details
200V (@ 3kA 8/20μs)
Maximum attenuation (typical)
-75dB (100kHZ to 100MHz)
Approvals
Country Standard/Authority Approved for Product
MTL Incorporated
9 Merrill Industrial Drive, Hampton, NH 03842 USA
Tel: +1 800 835 7075, +1 603 926 0090 Fax: +1 603 926 1899
E-mail: info@mtlnh.com, WWW: www.mtlsurge.com