Beruflich Dokumente
Kultur Dokumente
C205 -12 Cement-Mortar Protective Lining and Coating for Steel Water
Pipe--4 In. (100 mm) and Larger--Shop Applied
C206 -17 Field Welding of Steel Water Pipe - New Revision
C207 -13 Steel Pipe Flanges for Waterworks Service--Sizes 4 In. Through
144 In. (100 mm Through 3600 mm)
C208 -12 Dimensions for Fabricated Steel Water Pipe
C209 -13 Cold-Applied Tape Coatings for the Exterior of Special Sections,
Connections, and Fittings for Steel Water Pipelines
C210 -15 Liquid-Epoxy Coatings and Linings for Steel Water Pipe and
Fittings
C213 -15 Fusion-Bonded Epoxy Coatings and Linings For Steel Water Pipe
and Fittings
C214 -14 Tape Coatings for Steel Water Pipe
C215 -16 Extruded Polyolefin Coatings for the Exterior of Steel Water
Pipelines
C216 -15 Heat-Shrinkable Cross-Linked Polyolefin Coatings for Steel Water
Pipe and Fittings
Concrete Pipe
C300 -16 Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
C301 -14 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
C302 -16 Reinforced Concrete Pressure Pipe, Noncylinder Type
C303 -17 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type -
New Revision
C304 -14 Design of Prestressed Concrete Cylinder Pipe
Valves and Hydrants
C500 -09 Metal-Seated Gate Valves for Water Supply Service
C502 -14 Dry-Barrel Fire Hydrants
C503 -14 Wet-Barrel Fire Hydrants
C504 -15 Rubber-Seated Butterfly Valves
C507 -15 Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)
C508 -09 Swing-Check Valves for Waterworks Service, 2 In. Through 24
In. (50-mm Through 600-mm) NPS
C509 -15 Resilient-Seated Gate Valves for Water Supply Service
C510 -07 Dble Chk Valve Backflow Prevention Assembly
C511 -07 Reduced-Pressure Principle Backflow Prevention Assembly
C512 -15 Air-Release, Air/Vacuum, and Combination Air Valves for Water
and Wastewater Service
C514 -15 Air Valve and Vent Inflow Preventer Assemblies for Potable
Water Distribution System and Storage Facilities
C515 -15 Reduced-Wall, Resilient-Seated Gate Valves for Water Supply
Service
C602 -17 Cement - Mortar Lining of Water Pipelines in Place - 4 In. (100
mm) and Larger - New Revision
C604 -11 Installation of Steel Water Pipe - 4 In. (100 mm) and Larger
C605 -13 Underground Installation of Polyvinyl Chloride (PVC) and
Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe and
Fittings
C606 -15 Grooved and Shouldered Joints
C620 -07 Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75
mm) and Larger
Disinfection of Facilities
C651 -14 Disinfecting Water Mains
C652 -11 Disinfection of Water-Storage Facilities
C653 -13 Disinfection of Water Treatment Plants
C654 -13 Disinfection of Wells
C655 -09 Field Dechlorination
C670 -15 Online Chlorine Analyzer Operation & Maintenance
C671 -16 Online Turbidimeter Operation & Maintenance - First Edition
Meters
C700 -15 Cold-Water Meters - Displacement Type, Bronze Main Case
C701 -15 Cold-Water Meters - Turbine Type, for Customer Service
C702 -15 Cold-Water Meters - Compound Type
C703 -15 Cold-Water Meters - Fire-Service Type
C704 -15 Propeller-Type Meters for Waterworks Applications
C707 -10 (R16) Encoder-Type Remote Registration Systems for Cold-Water
Meters - Reaffirmed without revision 2016
C708 -15 Cold-Water Meters - Multijet Type
C710 -15 Cold-Water Meters - Displacement Type, Plastic Main Case
C712 -15 Cold-Water Meters - Singlejet Type
C713 -15 Cold-Water Meters - Fluidic-Oscillator Type
C714 -13 Cold-Water Meters for Residential Fire Sprinkler Sys, in one- and
two- Family Dwellings and Manufactured Homes
C750 -16 Transit-Time Flowmeters in Full Closed Conduits
Wells Wells
Filtration Membranes
Filtration Membranes
Fluorides Fluorides
Fluorides Fluorides
Fluorides Fluorides
Slide Gates Power Actuating Devices for Valves & Slide Gates
Slide Gates Protective Int. Coatings for Valves & Hydrants
Slide Gates Slide Gates
Slide Gates Slide Gates
Slide Gates Slide Gates
Slide Gates Slide Gates
Equipment UV Disinfection
C205 -12 Cement-Mortar Protective Lining and Coating for Steel Water
Pipe--4 In. (100 mm) and Larger--Shop Applied
C206 -17 Field Welding of Steel Water Pipe - New Revision
C207 -13 Steel Pipe Flanges for Waterworks Service--Sizes 4 In. Through
144 In. (100 mm Through 3600 mm)
C208 -12 Dimensions for Fabricated Steel Water Pipe
C209 -13 Cold-Applied Tape Coatings for the Exterior of Special Sections,
Connections, and Fittings for Steel Water Pipelines
C210 -15 Liquid-Epoxy Coatings and Linings for Steel Water Pipe and
Fittings
C213 -15 Fusion-Bonded Epoxy Coatings and Linings For Steel Water Pipe
and Fittings
C214 -14 Tape Coatings for Steel Water Pipe
C215 -16 Extruded Polyolefin Coatings for the Exterior of Steel Water
Pipelines
C216 -15 Heat-Shrinkable Cross-Linked Polyolefin Coatings for Steel Water
Pipe and Fittings
Concrete Pipe
C300 -16 Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
C301 -14 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
C302 -16 Reinforced Concrete Pressure Pipe, Noncylinder Type
C303 -17 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type -
New Revision
C304 -14 Design of Prestressed Concrete Cylinder Pipe
Valves and Hydrants
C500 -09 Metal-Seated Gate Valves for Water Supply Service
C502 -14 Dry-Barrel Fire Hydrants
C503 -14 Wet-Barrel Fire Hydrants
C504 -15 Rubber-Seated Butterfly Valves
C507 -15 Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)
C508 -09 Swing-Check Valves for Waterworks Service, 2 In. Through 24
In. (50-mm Through 600-mm) NPS
C509 -15 Resilient-Seated Gate Valves for Water Supply Service
C510 -07 Dble Chk Valve Backflow Prevention Assembly
C511 -07 Reduced-Pressure Principle Backflow Prevention Assembly
C512 -15 Air-Release, Air/Vacuum, and Combination Air Valves for Water
and Wastewater Service
C514 -15 Air Valve and Vent Inflow Preventer Assemblies for Potable
Water Distribution System and Storage Facilities
C515 -15 Reduced-Wall, Resilient-Seated Gate Valves for Water Supply
Service
C602 -17 Cement - Mortar Lining of Water Pipelines in Place - 4 In. (100
mm) and Larger - New Revision
C604 -11 Installation of Steel Water Pipe - 4 In. (100 mm) and Larger
C605 -13 Underground Installation of Polyvinyl Chloride (PVC) and
Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe and
Fittings
C606 -15 Grooved and Shouldered Joints
C620 -07 Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75
mm) and Larger
Disinfection of Facilities
C651 -14 Disinfecting Water Mains
C652 -11 Disinfection of Water-Storage Facilities
C653 -13 Disinfection of Water Treatment Plants
C654 -13 Disinfection of Wells
C655 -09 Field Dechlorination
C670 -15 Online Chlorine Analyzer Operation & Maintenance
C671 -16 Online Turbidimeter Operation & Maintenance - First Edition
Meters
C700 -15 Cold-Water Meters - Displacement Type, Bronze Main Case
C701 -15 Cold-Water Meters - Turbine Type, for Customer Service
C702 -15 Cold-Water Meters - Compound Type
C703 -15 Cold-Water Meters - Fire-Service Type
C704 -15 Propeller-Type Meters for Waterworks Applications
C707 -10 (R16) Encoder-Type Remote Registration Systems for Cold-Water
Meters - Reaffirmed without revision 2016
C708 -15 Cold-Water Meters - Multijet Type
C710 -15 Cold-Water Meters - Displacement Type, Plastic Main Case
C712 -15 Cold-Water Meters - Singlejet Type
C713 -15 Cold-Water Meters - Fluidic-Oscillator Type
C714 -13 Cold-Water Meters for Residential Fire Sprinkler Sys, in one- and
two- Family Dwellings and Manufactured Homes
C750 -16 Transit-Time Flowmeters in Full Closed Conduits
Wells Wells
Filtration Membranes
Filtration Membranes
Fluorides Fluorides
Fluorides Fluorides
Fluorides Fluorides
Slide Gates Power Actuating Devices for Valves & Slide Gates
Slide Gates Protective Int. Coatings for Valves & Hydrants
Slide Gates Slide Gates
Slide Gates Slide Gates
Slide Gates Slide Gates
Slide Gates Slide Gates
Equipment UV Disinfection