Beruflich Dokumente
Kultur Dokumente
www.vishay.com
Vishay Sprague
Aluminum Capacitors
+85 °C, Powerlytic™ Electrolytics
FEATURES
• Designed for applications requiring greatest
possible capacitance in small physical case Available
sizes
• Supplement original Type 36D can-type capacitors,
offering lower capacitance values in smaller sizes with
QUICK REFERENCE DATA axial leads
DESCRIPTION VALUE • Welds at all critical anode and cathode terminals eliminate
Operating temperature -20 °C to +85 °C riveted or pressure connections to assure freedom from
Tolerance on CR: open circuits even when operated in the microvolt or
3 WVDC to 75 WVDC +75 %, -10 % millivolt signal range
100 WVDC to 450 WVDC +50 %, -10 %
Dissipation Factor: • Improved molded phenolic and seals
3 WVDC and 6 WVDC 230 % • Pressure-sensitive safety vent
10 WVDC and 15 WVDC 150 %
• Service life of 10 years or more in normal circuit
25 WVDC and 30 WVDC 60 %
applications
40 WVDC and 50 WVDC 45 %
75 WVDC and 100 WVDC 30 % • Capacitors listed have outer plastic-film insulation. For
150 WVDC to 450 WVDC 18 % bare case, change last character of part number from
20 to 3140 maximum amperes rms at 6 to 0 and subtract 0.062" [1.575 mm] from diameter and
Ripple current 120 Hz and +85 °C, depending upon 0.125" [3.175 mm] from length
capacitance
Useful life at 85 °C 500 h
• Axial lead
I = k CV • Material categorization: for definitions of compliance
DC leakage current k = 6.0 at +25 °C; please see www.vishay.com/doc?99912
(after 5 min charge) k = 36.0 at +85 °C
I in μA, C in μF, V in Volts
CL
2.50 2.50
D [63.50] PVC sleeve [63.50]
min. min.
Tinned copper leads
No. 20 AWG (0.032" [0.813] Dia.) for D = 0.510" [13.0] and D = 0.635" [16.1]
No. 18 AWG (0.040" [1.016] Dia.) for D = 0.760" [19.3] and up
DESCRIPTION
CODE EXPLANATION
39D Product type
907 Capacitance value (900 μF)
G Tolerance (G = -10 % / +75 %; F = -10 % / +50 %)
003 Voltage rating at 85 °C (003 = 3 V)
EJ Can size (See Dimensions table)
6 Sleeve and sealing (6 = P.V.C. sleeve)
Note
• For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number.
Example: 39D907G003EJ6E3
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.