Sie sind auf Seite 1von 7

Home Mobile App user_artu5tuv (3)  中文

HCIA-WLAN Training V2.0 

Final Exam > Final Exam > Final Exam

Catalog  Learned 25% Final Exam  Bookmark this page

1. WLAN Basis Final Exam

2. CAPWAP Protocol and 100/100 points (graded)


WLAN Networking True (T) or False (F) Questions

3. WLAN Product Features 1.The IEEE is responsible for the use of wireless radio frequencies in the US.
and Security Configuation
true
4. WLAN Advanced
Technology and Antenna
false 

5. WLAN Planning Basis


and Troubleshooting

2.Spread spectrum technology is the prerequisite for using the ISM band to transmit wireless data.
Final Exam

Final Exam true 


Final Exam 

false

3.In PoE, PSU refers to power supply unit, which includes, for example, the Ethernet interfaces of a PoE switch.

true

false 

4.A BSSID is the MAC address of an AP and identifies the BSS managed by the AP.

true 

false

5.WLAN is a type of Wi-Fi.

true

false 

6.Huawei WDS is only support point to point network topology.

/
true

false 

7.To set up links on a WDS network, the root AP and leaf APs must use the same channel.

true 

false

8.Each Huawei AP can be configured with only one SSID.

true

false 

9.On a WLAN, an AP always works in half duplex mode.

true 

false

10.Huawei WLAN Planner allows users to increase predefined switch types.

true 

false

Single Answer

1.Which command displays information about the current version? ( )

display interface

display current-configuration

display ap all

display version 

2.Which of the following port is used for control tunnel of CAPWAP?

TCP: 5246

TCP: 5247
/
UDP: 5246 

UDP: 5247

3.Which characteristics should an antenna have for outdoor long distance point-to-point transmission?

High gain, small lobe width 

High gain, large lobe width

Omnidirectional

Low gain, large lobe width

4.Which of the following is used by a STA to connect to a WLAN?

SSID 

BSA

ESA

IBSS

5.Which uniquely identifies a device vendor? ( )

SSID

MAC address 

Encryption algorithm

Channel

6.When was wireless network first used?

WWI

WWII 

Later 20th century

After 2000

7.Which of the following rates are supported by 802.11g? ( )

/
1,2,5.5,11 and 6,9,12,18,24,30,36,48,54 Mbps

6,9,12,18,24,36,48,54 Mbps

1,2,5.5,11 and 6,9,12,18,24,36,48,54 Mbps 

6,9,12,18,24,30,36,48,54 Mbps

8.How many APs can an ACU2 maximum manage?

256

512

1024

2048 

9.In Fit AP mode, which of the following authentication modes does not need the AC? ( )

Shared key authentication 

802.1X authentication

PSK authentication

Portal authentication

10.The AP’s transmit power is 20 dBm, antenna gain is 4 dBi, signal loss on cables and components is 1 dB,
receiving antenna’s gain is 2 dBi, and signal loss in the air is 80 dB. Which is the RSSI? ( )

-57

-56

-55 

-54

Multiple Answer

1.Which of the following are Huawei's WLAN topologies? ( )

Ad-hoc networking topology

Infrastructure networking topology

WDS networking topology

/
Mesh networking topology

2.Which of the following bands are available on a WLAN? ( )

2 GHz

5 GHz

5.4 GHz

2.4 GHz

3.Which of the following are Huawei's WLAN topologies? ( )

Ad-hoc networking topology

Infrastructure networking topology

WDS networking topology

Mesh networking topology

4.Which of the following standards support the 2.4 GHz band? ( )

802.11a

802.11b

802.11g

802.11n

802.11ac

802.11

5.Which of the following authentication modes are supported by APs? ( )

mac-auth

sn-auth

no-auth

mac-sn-auth


/
6.Which of the following are common diagnostic commands on the WLAN? ( )

Ping

Display

Trace

Show

7.Which of the following standards are 802.11 standards made by the IEEE? ( )

802.11a/b/g/n

802.11i

802.1X

802.11s

8.Which of the following statements are true about WEP? ( )

WEP adopts stream encryption technology.

IV is introduced into WEP encryption to break the key regularity.

IV used in WEP encryption is 48 bits in length.

WEP encryption allows four keys to be stored at the same time.

9.Which of the following are advantages of a Mesh network? ( )

Fast provisioning

Robustness

Low delay

Dynamically expanding the network coverage area

Flexibly networking

Wide application scenarios

10.Which of the following can be used to supply power to WLAN APs? ( )

PoE switch

/
PoE adapter

Independent power adapter

RF cable

Submit You have used 2 of 3 attempts

 Your answers have been saved but not graded. Click 'Submit' to
get the score.

Scan code download app

Huawei Official Site

Legal Notice Customer Agreement Acceptable Use Policy Privacy Policy Statement FAQ ilearningx@huawei.com
Enjoy learning anytime, anywhere
©2019 Huawei Technologies Co., Ltd.  粤A2-20044005号

Das könnte Ihnen auch gefallen