Beruflich Dokumente
Kultur Dokumente
ts h s
f s=1.82 *Hoop Stress
As
ts
hs
t
ts + 1.56sqtr(rmt)
Where,
fs = longitudinal stress in MPa
As=tshs+t(1.56sqrt(Rmt)+ts)
Rm = Mean Radius of Pipe
t = Penstock Shell Thickness
This stress can be generated in the pipe supports and mid span of pipe is there is stiffeners
present in bends and pipe straight portion.
1. Design Data
Intake Gate
- Type Vertical lift slide
- Opening dimensioning (w x h) 2.3 m x 2.0 m
- Number of
Gates (set) Three (3)
Fixed parts (set) Three (3)
- Elevation of
Sill beam (m.a.s.l) 635.5.0
Design Water Level (m.a.s.l.) 642.80
Design Head (m) 7.3
Operating platform (m.a.s.l) 644.0
- Maximum flow rate (m3/sec) 10.92
- Operating system screw spindle
- Operating speed 0.3 m/min
- Operating condition Unbalance pressure
- Sealing type UHMW bumper on ST-ST
- Corrosion allowance 2 mm
- Allowable stresses Acc. to DIN 19704 or equivalent
Trash Passage Gate
- Type Vertical lift slide
- Opening dimensioning (w x h) 1.0 m x 2.5 m
- Number of
Gates (set) One (1)
Fixed parts (set) One (1)
- Elevation of
Sill beam (m.a.s.l) 637.75
Design Water Level (m.a.s.l.) 642.80
Design Head (m) 5.05
Operating platform (m.a.s.l) (644.00)
- Operating system Screw spindle
- Operating condition Unbalance pressure
- Sealing type UHMW bumper on ST-ST
- Corrosion allowance 2 mm
- Allowable stresses Acc. to DIN 19704 or equivalent