Beruflich Dokumente
Kultur Dokumente
Mounting accessories
BOC - BOCP
PLASTIC EXHAUST VALVES
Plastic exhaust valves manufactured from injection moulded white polypropylene plastic.
Used for extraction in VMC simple or double flow installations.
Can be fitted:
• In plaster board ceilings: inlet with clamps (BOCP)
The clamping sleeve, made of plastic, has three securing clamps.
A gasket ensures securing to the duct as well as sealing.
• Slab crossmember: Long sleeve inlet (BOC)
The long sleeve is made of plastic and has 2 securing clamps.
A gasket guarantees securing to duct as well as sealing.
A flange at the bottom ensures securing to the inlet.
Accessories
Dimensions (mm)
BOCP BOC
Model A B D1 D2 H
BOC 80 119 19 78 98 275
BOC 125 169 27 122 154 275
BOCP 80 119 19 78 99 100
BOCP 125 169 27 122 159 100
672
AIR EXHAUST VALVES
Mounting accessories
BOA
PLASTIC SUPPLY/EXHAUST VALVES
Plastic exhaust valves manufactured from injection moulded white polypropylene plastic.
Used for extraction in simple or double flow VMC installations. There are different sections
for numerous applications:
• Reed inlet (BOA). Self-locking clamps to enable installation in Pladur, plaster or brick. The
inlet is composed of a 130 mm sleeve and a white polystyrene grille.
• Clamp inlet (BOAP). The clamp sleeve, made of plastic, has 3 securing clamps.
• inlets for thick walls (BOAE). By incorporating a supplementary extension, it is possible to
install in walls up to 290 mm thick. Secured by self-locking metal clamps.
• Angled inlets (BOAC). Thanks to a sleeve with a 90º elbow, these inlets can be fitted to ceil-
ings or brick or plaster Pladur surfaces and they are secured by embedding or gluing.
Accessories
Model Ø Connector type
(mm)
BOAP 80 80 Ht 80 - 3-claw mounting connector
BOAP 125 125 Ht 60 - 3-claw mounting connector
Dimensions (mm)
Ø A
60 ø8
80 129 mm 0
125 172 mm
A
A
A
60
ø1
20
A
A
A
BOAP 125 A BOAE 125 BOAC 125
A
673
AIR EXHAUST VALVES
Mounting accessories
ALIZE BAR
SELF-ADJUSTING EXHAUST VALVES
Wide range of self-adjusting exhaust valves, manufactured from injection moulded white
polystyrene.
Designed for kitchen, bathrooms and toilet ventilation applications, they are available either for
one fixed air volume or for dual air volume. The valve maintains a constant air volume within a
pressure range from 50 to 150 Pa.
• BARP: Plasterboard mounting valve (BAR + MNG AB)
• BARJ: Duct mounting valve (BAR + MNG JN)
• BAR: Valve without connector
The valve can not be mounted without the connector.
To mount the connector to the valve only it is necessary to push it.
Accessories
Dimensions (mm)
BARP and BARJ Ø 125 BARP Ø 80 Mounting connector for BARJ 3-claw mounting
connector for BARP80
674
AIR EXHAUST VALVES
Mounting accessories
ALIZE BAR
SELF-ADJUSTING EXHAUST VALVES (BAR) ACCESSORIES
MNG JN - Mounting connector Return angle guide
with rubber seal. Ceiling instalation will require the return
Mounting connector Ø 99 with rubber seal angle fitting for pull cord guidance.
Mounting connector Ø 116 with rubber seal
Mounting connector Ø 125 with rubber seal
Accessories
installations.
m3/h
Pressure in Pa Pressure in Pa
675
AIR EXHAUST VALVES
Mounting accessories
ALIZE BAR
The cover bezel or plate is fitted when painting is finished, in rectangular openings measuring 80 x 170 to 110 or at 245 mm.
For dimensions wider than 110 mm. , it is necessary to use larger mounting clamps (4) (ask for information).
Fit the plate against the wall placing the mounting clamps inside the opening. Do not over tighten the screws. Sealing is guaranteed by a foam seal
adhered to the plate.
PRC 177 x 278 without spacer ➁ Renewal plate with foam joint
Cover plates
Made of white polystyrene, used to seal existing orifices that are no longer necessary for
ventilation.
The steps to follow for installation are the same as above.
Model Dimensions
PRP 177 x 278 177 x 278 mm
Model Dimensions
PAM 148 x 202 148 x 202 mm
676
AIR EXHAUST VALVES
Mounting accessories
ALIZE BEH
HUMIDITY-ADJUSTABLE INLETS/OUTLETS
Humidity-adjustable inlets/outlets made of white polystyrene, to control the airflow accor-
ding to humidity or air pollution inside detached houses, flats or commercial premises.
In houses, these inlets will be connected to an extractor network.
There are timed (30 minutes) humidity-adjustable versions, manual, electric or with a pre-
sence detector.
They have a clamp-type connector.
Accessories
Humidity-adjustable Presence detection Controlled manually
Domestic Commercial Domestic Comerciales Commercial
Airflow Yes Yes Minimum Yes Yes Minimum Domestic Yes
control Automatic Automatic airflow airflow
YES in kitchen Works with pres- Works with pre- YES Electrical Stop
Maximum controlled by a Maximum ence detection sence detection Maximum works with a and Start
NO cord or electri-
airflow cord or electri- airflow (timed stopping) (timed stopping) airflow
cally cally (timed
stopping)
Examples of references
677
AIR EXHAUST VALVES
Mounting accessories
Acoustic characteristics
Domestic Commercial
5/40 28 31 34 15/50 29 34 37
10/45 29 32 35 15/75 41 43 45
5/40/90 28 31 34 5/40/100 28 31 34
10/45/120 29 32 35 10/45/150 29 32 35
10/45/135 29 32 35
Accessories
Noise levels are indicated for a nominal extraction flow and for a
maximum relative humidity.
ALIZE Lw en dB(A)
10/150 < 20 23 27
45/145 29 32 35
Dimensions (mm)
Accessories
Angle changer Acoustic elements
Angle changer for inlets with a cord installed Acoustic ring (2): plastic connector with a
in the ceiling. Enables the cord to be guided (1) brush joint and melamine foam. Fitted to the
along the wall with the BEHC and BEHW duct just behind the inlet.
manual control inlets Acoustic element (1): Made of melamine
foam, fitted behind the inlet in models BEHC,
BEHS and BEHW.
(2)
678
AIR EXHAUST VALVES
Mounting accessories
BOR
INTERIOR AIR EXHAUST VALVE
White polystyrene air exhaust valves for dwelling and commercial applications. All models
offer an adjustable central valve to regulate the airflow. They can be used in heating, air
conditioning and ventilation systems.
Operation range from 40 to 150 Pa.
The central mobile shutter can be used to control the airflow by utilising a central adjustment screw.
Versions:
• Adjustable inlets with a gasket for installation in duct: BOR
• Adjustable inlets with a clamp for installation in Pladur BOR-P
• Adjustable inlets with a long sleeve through walls: BOR-D
Accessories
Duct diameter Duct mounting valve Plasterboard mounting valve Paving slab and thick wall mounting valve
Ø (mm)
Model Model Model
-
R
679
AIR EXHAUST VALVES
Mounting accessories
Performance curves
The numbers shown on the upper side of the performance curve graphs indicate the position of the
adjustable central valve.
Supply air
Supply air
Accessories
Extract air
Extract air
680
AIR EXHAUST VALVES
Mounting accessories
BIR
Outlets entirely made of sheet steel coated in white epoxy paint. Consists of a blowing
cone, a mobile central shutter enabling the air jet to be adjusted and its direction gui-
ded and a rubber gasket that ensures it is secured and sealed, which can resist a conti-
nuous temperature of -20°C to 120°C.
Used for injecting air in commercial accommodation and premises, ceiling-fitted. Range
of use from 50 to 150 Pa. The outlet comes with a galvanized steel connector to facili-
tate installation.
Accessories
Technical specifications and dimensions (mm)
Ø Dimensions
Model (mm) D1 (mm) D2 (mm) H (mm)
BIR 100 100 88 145 18
BIR 125 125 113 168 21
BIR 160 160 148 203 21
BIR 200 200 188 243 21
Specification curves
These graphs show the flow-pressure curves of the BIR outlets as well as their Lw noise production expressed in dB (A).
The figures at the top indicate the adjustment amount.
Adjustment
R
681
AIR EXHAUST VALVES
Mounting accessories
BOC
INTERIOR AIR EXHAUST VALVE
L1
1 L Model ØA ØB ØC ØD ØE L
ØB
B
ØA
A
ØC
C
ØE
E
Accessories
Metallic air exhaust valves for dwelling and commercial applications. All models offer
an adjustable central valve to regulate the airflow. They can be used in heating, air
conditioning and ventilation systems.
(Pa) (Pa)
-3 0 +3 +6 ( mm ) ( mm ) -3 0 +3 +6
200
BOC - 100 200 BOC - 125
100
100
50
50
40
40
30 30
20 20
15
(m3/h) (m3/h)
10 10
10 15 20 30 40 50 100 200 300 20 30 40 50 100 200 300 500
(Pa) (Pa) -3 0 +3 +6
( mm ) -3 0 +3 +6 ( mm )
100 100
50 50
40 40
30 30
20 20
(m3/h) (m3/h)
10 10
40 50 100 200 300 500 1000 50 100 200 300 500 1000
682