Beruflich Dokumente
Kultur Dokumente
[2/27/2009 | 0 comments ]
Shortcut Utility
LinkWithin
Windows shortcut utility
[2/27/2009 | 0 comments ]
Shortcut Utility
Here are some of the windows shortcut utilities. you can use them by
typing these to your run box
LinkWithin
How to Make a backup copy of your Windows XP
Registry
[2/27/2009 | 0 comments ]
Many of the tips and tricks you want to perform require editing the
Windows Registry. In this tip or trick, I will show you the correct way to
perform a backup of your Windows Registry so that you can safely restore
your systems registry files in the event something goes wrong.Here is the
trick
If you want to hide any partition of your hard disk just follow these simple
steps of this trick.
All partitions will be listed, there will be also a volume number for each
partitions
3. Suppose you want to hide drive D:, type select volume 3 (Here 3 is the
volume number of D:, in your pc it may vary). A message will now appear
in the window saying "Volume 3 is the selected volume".
4. Now type remove letter D . You may have to reboot the computer.
Diskpart will remove the letter. Since Windows XP doesn't have the
capability to identify the unknown volume, it won't display or show results
from it. To access the content of the hidden drive, repeat the process, but
in the fourth step, replace remove to assign, ie., assign letter E.
To disable unwanted startup services for a safer, faster XP, use the
"Services" Admin Tool (Control Panel > Administrative Tools >
Services). If you are a single user of a non-networked machine, you can
disable the following items, with no ill effect.
Alerter
Clipbook
Computer Browser
Fast User Switching
Human Interface Access Devices
Indexing Service (Slows the hard drive down)
Messenger
Net Logon (unnecessary unless networked on a Domain)
Netmeeting Remote Desktop Sharing (disabled for extra security)
Remote Desktop Help Session Manager (disabled for extra security)
Remote Procedure Call Locator
Remote Registry (disabled for extra security)
Routing & Remote Access (disabled for extra security)
Server
SSDP Discovery Service (this is for the utterly pointless "Universal
P'n'P", & leaves TCP Port 5000 wide open)
TCP/IP NetBIOS Helper
Telnet (disabled for extra security)
Universal Plug and Play Device Host
Upload Manager
Windows Time
Wireless Zero Configuration (for wireless networks)
Workstation
•Open My Computer
•Double-click the drive where Windows is installed (usually drive (C:),
unless you have more than one drive on your computer).
•If the contents of the drive are hidden, under System Tasks, click
Show the contents of this drive.
•Double-click the Documents and Settings folder.
•Double-click your user folder.
•Right-click any folder in your user profile, and then click Properties.
•On the Sharing tab, select the Make this folder private so that only I
have access to it check box.
Speed up your Windows 2000 & XP machines
browsing
[11/26/2008 | 0 comments ]
Note: Your actual Boot.INI may vary to a small degree. The above is an
example only. Be sure to copy your boot.ini file prior to making any
changes to it.
Read more: http://www.techvyom.com/search/label/Windows
%20tricks#ixzz12OUHePTJ
Under Creative Commons License: Attribution
Auto Logon to Windows XP
[2/27/2009 | 0 comments ]
Windows XP has the ability to store your password and other pertinent
information in the registry so that you can automate the logon process. Keep
in mind though, while this is a very convenient method, it has its security
risks. Anyone using your computer will have access to your account and your
network. Only use this setting if the other people within your network are
trusted.
Warning: This tweak involves editing the Windows registry. Mistakes made
while editing can have serious effects on your Windows installation. Be sure
that you have made a backup copy of the registry prior to making any
changes.
Note: If the DefaultPassword entry does not exist. You will need to create this
entry. Here's how:
a. Hold your mouse over the right pane and right click an empty area.
b. Click New>> String Value.
c. A new entry at the bottom of the right pane will now appear. Name it
DefaultPassword. Press Enter.
d. Now, double click your new DefaultPassword entry and type in your
password in the Value Data box.
7. Back in the right pane, locate the entry titled AutoAdminLogon. Double
click this entry and change the value from 0 to 1. Click OK. The "1" entry
turns the feature ON and the "0" turns the feature OFF.
Note: If the AutoAdminLogon entry does not exist, follow the instructions
above and create this new string entry.
1.Go to Control panel -> Folder options -> view tab -> show hidden files
[.ShellClassInfo] IconFile=%SystemRoot%\system32\SHELL32.dll
IconIndex=3
[ExtShellFolderViews] {BE098140-A513-11D0-A3A4-
00C04FD706EC}={BE098140-A513-11D0-A3A4-00C04FD706EC}
[{BE098140-A513-11D0-A3A4-00C04FD706EC}] IconArea_Image=
5.Now copy the path location of the Picture or Wallpaper that you want to
use and Paste it at the end of the line "image=" and paste the address path.
Example::
[ExtShellFolderViews] {BE098140-A513-11D0-A3A4-
00C04FD706EC}={BE098140-A513-11D0-A3A4-00C04FD706EC}
[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
IconArea_Image=C:\Documents and Settings\win xp\My Documents\My
Pictures\kihlo32qwe.jpg
6.Finally Refresh and Close the folder and check again
click on start then run and type regedit and press enter
or simply press win+r which opens run command and then type regedit and
press enter
then press CTRL+F and find for the below key in the registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
Then find for ProgramFilesDir. by default, this value will be C:\Program Files.
Edit the value to any valid drive or folder and XP will use that new location as
the default installation directory for new programs.
The path to memory mastery starts by taking greater control over the
programs you're running.
Browse the Start > All Programs menu and uninstall any software you don't
use, then launch MSCONFIG.EXE and click the Startup tab to see what's
configured to run when Windows starts. If you see something you no longer
need, then uninstall the program or change its settings so it doesn't load
automatically when you log on.
If you're determined to try disabling other services, then click Start, launch
Services.msc and scroll down the list to see what's available. On our test
Windows Vista Ultimate Edition PC we could safely disable the following by
double-clicking and setting its Startup type to Disabled.
Apple Mobile Device: Comes with iTunes, unnecessary if you don't actually
have an Apple device to connect.
Distributed Link Tracking Client: Maintains links between files across a
network domain, not a feature that we use.
Nero BackItUp Scheduler 3: Provided with Nero Burning ROM, but
unnecessary if you don't use the back-up tool.
Offline Files: Useful if you synchronise files between computers, but we don't.
Tablet PC Input Service: This isn't a tablet PC.
This recovered perhaps 10MB of RAM. Prune your services more severely and
you can achieve more, but you're also risking problems if you remove
something that you actually need. If you're willing to take the risk, then visit
Black Viper for detailed guidance.
If your PC has 4GB of memory you'll probably find you can only access 3 to
3.5GB of that, because your BIOS has allocated the rest of the address space
to your video adapter, network card and so on.
To speed up Windows Vista, for instance, turn off the Aero interface if you
can do without it (right-click the desktop, select Personalise > Theme and
choose Windows Classic). Your desktop won't look nearly as pretty, but as
compensation you'll save close to 40MB of RAM.
And is it really important to see the Windows Vista network icon flash as data
is transferred? If not, right-click the icon, select Turn Off Activity Animation
and save 1 to 5MB of RAM.
6. Minimise applications
If you're running an application then it'll inevitably consume RAM, but there's
a way to reduce the amount: minimise it. If the app isn't doing any work (it's
just a browser with several tabs open, say) then when it's minimised
Windows will reclaim some of its memory to give to other applications. So it's
always preferable to minimise inactive programs rather than just leaving
their windows open on your desktop.
8. Monitor your PC
Once you've cleaned up your PC, reboot and take a closer look at what's
using your RAM right now.
Press Ctrl+Shift+Esc to launch Task Manager, select the Processes tab, click
View > Select Columns and make sure 'Memory (Private Working Set)' is
checked). Click OK, select the 'Show processes from all users' button, then
click the 'Memory (Private Working Set)' column header.
You'll now see every process on your system, in the order in which they're
using memory. Browse down the list - are you running any background
programs that you really don't need? Turn them off if so. If you discover
some memory hogs you don't recognise, then enter their process names at
Google to find out more.
If you really want to drill down into your PC's activities, then there are two
free Sysinternals tools that will prove invaluable. Autoruns will show you
everything that loads when your Windows starts up, while Process Explorer
displays running programs in great detail and shows you the resources
they're using. Go download them, they're some of the best PC
troubleshooting tools around.
Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key
HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex
METHOD1
1. Right click on your desktop and choose "New=>shortcuts".
2. In the box that says "Type the location of the shortcut",
type in "shutdown -s -t 3600" without the quotation marks and click next.
Note: 3600 are the amount of seconds before your computer shuts down.
So , 60secs*60mins=3600secs.
3. Make up a name for the shortcut and you're done.
You can change the icon by right clicking=>properties=>change
icon=>browse
TO ABORT:
To make an abort key to stop the shutdown timer just create another
shortcut and make
the "location of the shortcut" to " shutdown -a" without the quotes.
METHOD2
Here is another trick to shutdown at a specific time, for example you wish to
shutdown at 11:35am. Type this in
start=>Run
Type Code: at 11:35 shutdown -s
TO ABORT:
Code:shutdown -a
Read more: http://www.techvyom.com/search/label/Windows
%20tricks#ixzz12OSiUqRr
Under Creative Commons License: Attribution
I know there are a lot of people who love using the run prompt or the
command prompt rather than using the control panel So here are some
quick tips and tricks that you can use directly in the run box
Calculator : calc
Findfast : findfast.cpl
Now no need to install any software for your usb blutooth !!!
And Type >>>> fsquirt <<<< Thats it you are Done Now you can Transfer
your Files With BluTooth without any software !!!
I hope you People Like This...!!!
23 Ways To Boost XP !!
[10/31/2009 | 0 comments ]
Here are 23 suggestions that will enhance the performance and reliability of
your ' PCs. Best of all, most of them will cost you nothing.
1.) To decrease a system's boot time and increase system performance, use
the money you save by not buying defragmentation software -- the built-in
Windows defragmenter works just fine -- and instead equip the computer
with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.
2.) If a PC has less than 512 MB of RAM, add more memory. This is a
relatively inexpensive and easy upgrade that can dramatically improve
system performance.
3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not
sure, here's how to check: First, double-click the My Computer icon, right-
click on the C: Drive, then select Properties. Next, examine the File System
type; if it says FAT32, then back-up any important data. Next, click Start,
click Run, type CMD, and then click OK. At the prompt, type CONVERT C:
/FS:NTFS and press the Enter key. This process may take a while; it's
important that the computer be uninterrupted and virus-free. The file system
used by the bootable drive will be either FAT32 or NTFS. I highly recommend
NTFS for its superior security, reliability, and efficiency with larger disk
drives.
4.) Disable file indexing. The indexing service extracts information from
documents and other files on the hard drive and creates a "searchable
keyword index." As you can imagine, this process can be quite taxing on any
system.
The idea is that the user can search for a word, phrase, or property inside a
document, should they have hundreds or thousands of documents and not
know the file name of the document they want. Windows XP's built-in search
functionality can still perform these kinds of searches without the Indexing
service. It just takes longer. The OS has to open each file at the time of the
request to help find what the user is looking for.
Most people never need this feature of search. Those who do are typically in
a large corporate environment where thousands of documents are located on
at least one server. But if you're a typical system builder, most of your
clients are small and medium businesses. And if your clients have no need
for this search feature, I recommend disabling it.
Here's how: First, double-click the My Computer icon. Next, right-click on the
C: Drive, then select Properties. Uncheck "Allow Indexing Service to index
this disk for fast file searching." Next, apply changes to "C: subfolders and
files," and click OK. If a warning or error message appears (such as "Access
is denied"), click the Ignore All button.
5.) Update the PC's video and motherboard chipset drivers. Also, update and
configure the BIOS. For more information on how to configure your BIOS
properly, see this article on my site.
6.) Empty the Windows Prefetch folder every three months or so. Windows
XP can "prefetch" portions of data and applications that are used frequently.
This makes processes appear to load faster when called upon by the user.
That's fine. But over time, the prefetch folder may become overloaded with
references to files and applications no longer in use. When that
happens, Windows XP is wasting time, and slowing system performance, by
pre-loading them. Nothing critical is in this folder, and the entire contents are
safe to delete.
7.) Once a month, run a disk cleanup. Here's how: Double-click the
My Computer icon. Then right-click on the C: drive and select Properties.
Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph
-- and delete all temporary files.
10.) Remove all spyware from the computer. Use free programs such as
AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are
installed, be sure to check for and download any updates before starting
your search. Anything either program finds can be safely removed. Any free
software that requires spyware to run will no longer function once the
spyware portion has been removed; if your customer really wants the
program even though it contains spyware, simply reinstall it. For more
information on removing Spyware visit this Web Pro News page.
11.) Remove any unnecessary programs and/or items from Windows Startup
routine using the MSCONFIG utility. Here's how: First, click Start, click Run,
type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items
you don't want to start when Windows starts. Unsure what some items are?
Visit the WinTasks Process Library. It contains known system processes,
applications, as well as spyware references and explanations. Or quickly
identify them by searching for the filenames using Google or another Web
search engine.
13.) Turn off any and all unnecessary animations, and disable active desktop.
In fact, for optimal performance, turn off all animations. Windows XP offers
many different settings in this area. Here's how to do it: First click on the
System icon in the Control Panel. Next, click on the Advanced tab. Select the
Settings button located under Performance. Feel free to play around with the
options offered here, as nothing you can change will alter the reliability of
the computer -- only its responsiveness.
15.) Visit Microsoft's Windows update site regularly, and download all
updates labeled Critical. Download any optional updates at your discretion.
17.) Make sure the customer has fewer than 500 type fonts installed on their
computer. The more fonts they have, the slower the system will become.
While Windows XP handles fonts much more efficiently than did the previous
versions of Windows, too many fonts -- that is, anything over 500 -- will
noticeably tax the system.
18.) Do not partition the hard drive. Windows XP's NTFS file system runs
more efficiently on one large partition. The data is no safer on a separate
partition, and a reformat is never necessary to reinstall an operating system.
The same excuses people offer for using partitions apply to using a folder
instead. For example, instead of putting all your data on the D: drive, put it
in a folder called "D drive." You'll achieve the same organizational benefits
that a separate partition offers, but without the degradation in system
performance. Also, your free space won't be limited by the size of the
partition; instead, it will be limited by the size of the entire hard drive. This
means you won't need to resize any partitions, ever. That task can be time-
consuming and also can result in lost data.
20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web
site for updated firmware. In some cases you'll be able to upgrade the
recorder to a faster speed. Best of all, it's free.
22.) If you're sick of a single Windows Explorer window crashing and then
taking the rest of your OS down with it, then follow this tip: open My
Computer, click on Tools, then Folder Options. Now click on the View tab.
Scroll down to "Launch folder windows in a separate process," and enable
this option. You'll have to reboot your machine for this option to take effect.
23.) At least once a year, open the computer's cases and blow out all the
dust and debris. While you're in there, check that all the fans are turning
properly. Also inspect the motherboard capacitors for bulging or leaks.
To prevent these errors and system crashes, you need to regularly scan the
registry for errors and get rid of all unwanted information stored in it. Doing
this will help you maintain a compact and healthy registry and also prevent
system errors.
If you monitor the activity of your Windows Vista registry, you will see
hundreds of entries being accessed, removed, and added to it within a short
amount of time. Due to this constant addition and removal of information,
registry files tend to get fragmented. Many times, when a key is removed, it
leaves behind a place holder in the registry, which is actually an empty
registry key and is of no use. These registry holes also unnecessarily
contribute toward increasing registry size and making it unstable.
You know that all programs on your Vista PC have to access the registry to
perform various operations. Well, the same goes with malware programs
such as viruses, Trojans, spyware and adware too. If your PC is infected by
any kind of malware, your registry is likely to be filled up with many
malicious registry keys added by these programs. Although you may get rid
of malware using antivirus and antispyware tools, a few registry keys may
get left behind.
You can easily get rid of these left-behind malicious registry keys when you
perform registry cleanup.
A large number of registry cleaner tools are available in the market today
that you can use to perform registry fix and cleanup. Using a reliable registry
cleaner tool you can:
* Scan and remove all unwanted information from the registry and ensure
yourself an error-free PC.
* Defrag the registry to make the registry files contiguous and the registry
compact, thereby reducing the data access time and boosting the
performance of your PC.
* Perform a deep scan of the registry and weed out hidden malware
registry keys.
* Make registry backups that you can use to restore the registry in case it
fails.
To ensure that your PC is free from system errors and malware and is at its
best performance, you should regularly clean your registry. The simplest and
the most efficient method to do this is by using a registry cleaner utility.
"You're not always the same person. Why should it be any different on the
Web?" That's the title of the Orkut blog post announcing the changes that
place emphasis on grouping your friends. Google has added some changes
to the core function of orkut so we can share and interact with different
groups of friends on the Internet just like we do in real life. Now you can send
a single message to as many people as you want, all at once! Send a scrap,
photo, video or whatever to a group of friends or choose recipients
individually. You now have the power to decide ."Who is going to see this?"
1. With your Windows XP CD in the cd-rom drive and boot your computer
2. Press any key when you read "Press any key to boot from cd" on the screen
3. The first screen will indicate that Setup is inspecting the system hardware and
loading files
4. When you get to the Welcome screen, press ENTER to Setup Windows now
6. The next screen gives you the option to start a Repair process. Use the arrow
keys to select your XP installation (if you only have one, it should already be
selected) and press R to begin the Repair process
7. Setup will now check your disks and then start copying files which can take
several minutes. Shortly after this stage you will be required to reboot
8. During the reboot do not press any key to boot from the CD again. Setup will
resume automatically with the standard screen
10. Keep your eye on the lower left hand side of the screen. When you see the
Installing Devices progress bar, press SHIFT + F10. A command console will now
open up giving you a wide access to the system
11. At the prompt, type NUSRMGR.CPL and press Enter. You have gained graphical
access to your User Accounts in the Control Panel
12. Now remove or change your password as you prefer. Once the Repair is done,
you will be able to log on with your new password. Your programs and personalized
settings should remain intact.
Tech events & updates ,Tech news ,Tech Tricks & Tips , Tech studies and all about Tech .
• HOME
• TOEFL IELTS
• TECH NEWS
• TECH GYAN
• SOFTWARE
• JOBS
• MOBILES GADGETS
• EBOOKS
• GATE
○ CS / IT
○ ECE
○ Electical
○ Mechanical
• TRICKS
○ Windows Tricks
○ Computer Tricks
○ Internet Tricks
○ Mobile Tricks
○ Bloggers Tricks
○ SEO Tricks
• VIDEO LECTURES
○ CS/IT Video lectures
○ Tech Video
• TECH FUN
• BECOME AN AUTHOR
Top of Form
Search
Bottom of Form
Programming and coding is a kind of work which requires a lot of dedications and concentration . Many people
starts coding and surrenders quickly finding it difficult to cope . Here I am going to discuss some tools which
can help you develop your interest in programming . These tools will help you understand the concepts of
programming in a very interesting and entertaining way. Some of these tools were developed to teach kids to
Alice is a free and open source 3D programming environment designed to teach students object-oriented and
event-driven programming. In Alice, you can drag and drop graphic tiles in order to animate an object and
create a program. By emphasizing animations and social interactions, this approach was found to greatly
2. Boku
Boku is a stimulating game that introduces kids to programming while they play. Through programming Boku, a
virtual robot, children learn the basic principles of programming logic, analysis, and design.
3. Scratch
Scratch is a new programming language that makes it easy to create your own interactive stories, animations,
games, music, and art — and share your creations on the web. Check out this video showing how to create a
4. Lego Mindstrom
Lego Mindstorms is a line of programmable robotics/construction toys, manufactured by the Lego Group..It is
App Inventor is a easy to use Android application development tool . App Inventor uses building blocks, of
1.Handbrake
This is a free easy to use video conversion tool.Videos can be converted into almost all
format using Handbrake .Handbrake also supports chapter selection, basic subtitle
support and audio embedding. With tree diagrams and tabs in the interface.
2. Fences
Fences is a great tool for organizing your desktop . you can organize your desktop, by
arranging and sorting icons into various 'fences' or labelled shaded areas in a well-
presented manner.
3. Notepad ++
Notepad ++, expands on the functionality of the default notepad by including
tabbed windows.It is an ideal tool for programmers and supports many programming
languages.
4. Recuva
Recuva is a freeware application that recovers files that have been accidentally deleted
from the Recycle Bin, MP3 Players and memory cards, claiming to recover files that
have also been corrupted by viruses or damaged disks. The simple Recuva Wizard
at Startup appeals to both amateurs and professionals, it can be priceless when you
find those important photos or documents.
5.7Stacks
7Stacks , provides an insight into your documents quickly with a few clicks, and with a
matching aero theme effect.It is similar to what you have seen with Mac OS dock
6.Switcher
Another great Mac OSX feature is , the ability to view all running windows in various
thumbnails in full screen. Switcher mimics this feature, allowing you to decide which
mouse or keyboard shortcut you would like to activate the Switch.
7.7-Zip
7-Zip lets you uncompress almost any compressed data, and with the unique 7z format,
files can be compressed up to 40% smaller than Zip formats.
8.Eraser
Files deleted from the recycle bin are not necessarily lost forever, and it could be a
disaster if someone managed to retrieve sensitive information. Eraser erases by
overwriting the selected file several times in 'carefully selected patterns'. This means
that the file is not just deleted, but its left-out counterpart is overwritten to make sure it's
gone forever.