Beruflich Dokumente
Kultur Dokumente
TROUBLESHOOTING
Frequent issues Solution
• The sound and image are not synchronised through
the A/V IN
Download the latest firmware
• Can not adjust the level of quality of the DVB-T
recording
No issue, the DVB-T is always recorded in the best
quality
• I have a "sorry firmware can´t work.." error message
after updating the firmware.
Unit is defective, send to your repair center
• Unable to copy data on the Movie Cube from My
MacOS
Use a software (like NTFS-3G) allowing to write
on NTFS partitions
• Can not setup the last firmware release (v.4674/
v.4681/v.5215)
Check that bootloader version is updated in
latest version 1026
2011 - 03
1. Copy the ‘install.img’ file to the root directory of an 2. Plug the USB stick into the Movie Cube and from
empty USB stick. this menu select "Setup" then "System".
3. Select the line “System Update”. The above screen 4. The system will reboot and the firmware upgrade
appears. Press ENTER on the remote control. will start. DO NOT UNPLUG USB KEY DURING THE
UPDATE !
2011 - 03
Player Remote + RCA cable USB cable YUV cable Scart Out Power Supply User Quick CD with user Warranty card
batteries Adaptor manual Instal. manuals
Guide