0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
67 Ansichten1 Seite
This document provides instructions for using a portable power bank with wireless charging capabilities. It has an input of 5V/2000mA and can output 5V/2100mA through its USB port or 5V/1000mA through wireless charging over a distance of 4mm. It has a capacity of 14.8Wh/4000mAh. The instructions explain how to charge the power bank and then use it to charge mobile devices through the USB ports or by placing devices on the wireless charging area. Status indicators show charging status and remaining power level.
This document provides instructions for using a portable power bank with wireless charging capabilities. It has an input of 5V/2000mA and can output 5V/2100mA through its USB port or 5V/1000mA through wireless charging over a distance of 4mm. It has a capacity of 14.8Wh/4000mAh. The instructions explain how to charge the power bank and then use it to charge mobile devices through the USB ports or by placing devices on the wireless charging area. Status indicators show charging status and remaining power level.
This document provides instructions for using a portable power bank with wireless charging capabilities. It has an input of 5V/2000mA and can output 5V/2100mA through its USB port or 5V/1000mA through wireless charging over a distance of 4mm. It has a capacity of 14.8Wh/4000mAh. The instructions explain how to charge the power bank and then use it to charge mobile devices through the USB ports or by placing devices on the wireless charging area. Status indicators show charging status and remaining power level.
Input: DC 5V/2000mA Output: DC 5V/2100mA Wireless output: 5V/1000mA 1. Charging the portable Power bank Wireless charging distance: 4mm a. Using your mobile phone’s USB adapter. Connect a USB Capacity: 14.8Wh , 3.7V / 4000mAh cable to your phone’s USB adapter. Using the micro USB connector, connect the other end of the USB cable to the IN port on the portable Power bank. Plug the USB adapter into the outlet to begin charging. 6 b. Using your computer. Connect a USB cable to a USB outlet on your computer. Using the micro USB connector, connect the other end of the USB cable to an IN port on the 5 portable Power bank. Make sure the computer is on to begin 4 charging the portable Power bank. 2. Charging mobile phones and other electronic devices with USB output. a. The portable power device has a USB output port which has the maximum output current of 2100 mA. 3 1 2 b. Connect to USB cable to your mobile phone/device using the appropriate connector. Connect the other end of the USB 1. 5V Input Port (Micro USB) cable to the OUT port of the portable Power bank. Your 2. 5V Output Port (USB A-type) mobile phone/device should display the status of charging. 3. ON/OFF Button c. Remove the USB cable from your mobile device when it is 4. LED indicator (Wireless) fully charged. 5. LED indicator (advise of remaining charge – number of 3. Charging mobile phones and other electronic devices with illuminated lights decreases as power supply dwindles.) wireless output. 6. Wireless charging area To use the wireless charging mode the mobile device needs to Button and Indicator be a Qi-enabled device. If necessary, enable wireless charging Status LED Indicator in the settings of your mobile device. Next simply stick your device to the wireless charging area and the wireless charging Charging flash(Blue) will start Fully charged lit(Blue) Note: In order to charge device use only accessory cable Working lit(Blue) (provided with power bank) or the cable included with your Charging (Wireless) lit(Green) own device by the manufacturer. Standby (Wireless) lit(Red) Power On Press once Power Off Double press