Beruflich Dokumente
Kultur Dokumente
INVESTMENT POWDERS
STONECAST
Special application powder for stone-in-place casting or wax setting. SRS can be relied on
for highly effective solutions for stone-in-place castings because it is SRS who pioneered the
inclusion of special additives into investment powder for this kind of application.
I N V E S150°C/hr
TMENT POWDERS
Temperature °C
500
400
300
230°C
STONECAST
200
Do not remove flasks from100 furnace to cast until they have been held at casting temperature for a minimum
the core of3hrs
1.5hrs
of 1 hour. If held for less than 1 hour, the flasks will be at a 3.5hrs 4hrsthe
much higher temperature than 1h
digital temperature display states,0 and1 may 2result in
3 metal 4 mould 5 reaction.
6 7 8 9 10 11 12
Time in hours
• Slurry temperature 21°C
• Leave for 90 min to stand before burnout
MIXING INSTRUCTIONS
SRS PRODUCT
POWDER TO WATER RATIO 100 TO 38 SELECTOR CHAR
MIXING BY HAND MIXING BY MACHINE
1 Add powder to water 1 Add powder to water
12k Yellow
14k Yellow
18k Yellow
9k Yellow
2 Mix for 3 minutes 2 Mix for 4 - 5 minutes under full vacuum
Brass
Silver
3 Vacuum mixture for 1 minute 3
4 4 Vacuum flasks for 2 minutes
Silk
Vacuum flasks for 2 minutes Remove flasks immediately from vacuum
5 5
and to stand on a firm surface for 2 hours
Classic
Remove flasks immediately from
6 vacuum and to stand on a firm Eurovest
surface for 2 hours
400
300
230°C
200
100
3hrs 2.5hrs 4hrs
0 1 2 3 4 5 6 7 8 9 10 11 12
Time in hours
www.srs-ltd.co.uk