Sie sind auf Seite 1von 2

Setting the Standard

INVESTMENT POWDERS
SILK
Top quality powder especially suited to palladium white and 18k & 22k gold. For gold
casting nothing surpasses the quality of SRS Silk. This is our flagship product which is
composed of the highest quality and concentration of unmineralised cristobalite.

Easy to use and able to withstand many different


process conditions, SRS Silk gives trouble free
castings with a superior surface finish and easy
breakout. Ideal for high karat gold, including
18k white with Palladium.

SRS Investment Powders have been


used by the jewellery industry
worldwide for over 26 years,
proving their excellence again
and again in every kind of
application. Our products are
suitable for mixing by hand or
machine. For manufacturers
who are seeking a trouble-
free process, combined with
consistency and quality that
is unsurpassed, SRS investment
powders represent the ideal
solution.

Specialist Refractory Services Limited (a division of Goodwin Refractory Services Limited).


Registered Office: Ivy House Foundry, Hanley, Stoke-on-Trent, Staffs, ST1 3NR.
Registered in England. No: 01797882. VAT No: GB278 9237 05.

Tel:+44 (0) 1782 663600 | sales@srs-ltd.co.uk


Normal Burnout Cycle
800
730°C
700
Setting the Standard

600

I N V E S150°C/hr
TMENT POWDERS

Temperature °C
500

400

300
230°C
SILK
200

Do not remove flasks from100 furnace to cast until they have been held at casting temperature for a minimum
of 1 hour. If held for less than 1 hour, the core of3hrs
1.5hrs the flasks will be at a 3.5hrs
much higher temperature than
4hrsthe 1h
digital temperature display states,0
and1
may 2result in3 metal4 mould5 reaction.
6 7 8 9 10 11 12
Time in hours
• Slurry temperature 21°C
• Leave for 90 min to stand before burnout

MIXING INSTRUCTIONS
SRS PRODUCT
POWDER TO WATER RATIO 100 TO 38 SELECTOR CHAR
MIXING BY HAND MIXING BY MACHINE
1 Add powder to water 1 Add powder to water

12k Yellow
14k Yellow
18k Yellow
9k Yellow
2 Mix for 4 minutes 2 Mix for 4 minutes under full vacuum

Brass
Silver
3 Vacuum mixture for 1 minute 3 Pour flasks - 2 minute
4 Pour flasks - 1 minute 4 Vacuum flasks for 2 minutes
Silk
Vacuum flasks for 2 minutes Remove flasks immediately from vacuum
5 5
and to stand on a firm surface for 90 minutes
Classic
Remove flasks immediately from
6 vacuum and to stand on a firm Eurovest
surface for 90 minutes

Normal Burnout Cycle


800
730°C
700

600

150°C/hr
Temperature °C

500

400

300
230°C
200

100

1.5hrs 3hrs 3.5hrs 4hrs 1hr


0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Time in hours

www.srs-ltd.co.uk
MIXING INSTRUCTIONS
SRS PRODUCT
Specialist RefractoryPOWDER
Services
TOLimited (a division
WATER RATIO 100 TO of
38 Goodwin Refractory Services Limited).
SELECTOR CHART
Registered Office:
MIXING Ivy House Foundry, Hanley,
BY HAND Stoke-on-Trent,
MIXING BY MACHINE Staffs, ST1 3NR.
Registered in England. No: 01797882. VAT No: GB278 9237 05.
1 Add powder to water 1 Add powder to water
12k Yellow
14k Yellow
18k Yellow
22k Yellow

14k White
18k White
9k Yellow

2 Mix for 4 minutes 2 Mix for 4 minutes under full vacuum


9k White

Tel:+44 (0) 1782 663600 | sales@srs-ltd.co.uk


Brass
Silver

3 Vacuum mixture for 1 minute 3 Pour flasks - 2 minute


4 Pour flasks - 1 minute 4 Vacuum flasks for 2 minutes
Silk
Vacuum flasks for 2 minutes Remove flasks immediately from vacuum

Das könnte Ihnen auch gefallen