Beruflich Dokumente
Kultur Dokumente
Application
Purification or clarification (optional) of mineral oils used
in marine installations and power stations:
• Distillates
• Marine Diesel Oils MDO up to 13 cSt at 40°C
• Lubricating oils for trunk diesel engines operating on
distillates and light MDO
• Lubricating oils for steam and gas turbines
• Lubricating and hydraulic oils for hydroelectric
power stations
Concept
The MMB series of solids-retaining separators is
available in two models, the MMB 304 and MMB 305.
When operated in purifier mode, a After separation, the cleaned oil is dis-
gravity disc must be fitted to obtain the charged by a built-in paring disc pump.
correct interface position (the boundary Purifier-Clarifier.
between the separated oil and the The complete system includes MAWA
1. Oil inlet 4. Sludge basket
water seal) in the separator bowl. In the water seal alarm, starter, heater, valves, 2. Oil outlet 5. Sludge
optional clarifier mode, a clarifier disc is piping and other essential ancillary 3. Water outlet 6. Sealing water inlet
fitted instead of a gravity disc. equipment.
6. Regulating valve
7. Three-way valve 2
. .
15
8. Thermometer
9. Temperature sensor
10. Preheater Compressed 14
.
air
Oil
11. Flow switch outlet
12. Oil feed pump Oil
13. Strainer inlet
14. Solenoid valve, air Oil recir- . . .
15. Flexible hoses culation .
Sludge and
water outlet
Shipping data
Dimensions (mm)
MMB 304 MMB 305
A 910 935
B 795 795
C 465 465
Weight (kg)
Type of equipment Net Gross
Separator MMB 304
– without motor 185 235
– with motor 201 251
Separator MMB 305
– without motor 190 240
– with motor 218 268
Technical documentation
Complete information and documen- MAB 206
MAB 104
ALFA LAVAL is a trademark registered and owned by Alfa Laval Corporate AB.
EMD00096EN 0702 Alfa Laval reserves the right to change specifications without prior notification.