Beruflich Dokumente
Kultur Dokumente
Contents
3. Operation ............................ 4
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 0
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
Description
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 1
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
1. Safety
Caution :
Risk of cutting injury through exposed
running edges of web.
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 2
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
2. Technical Data
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 3
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
3. Operation
1 camera unit
2 monitor
3 controller
4 traverse
5 base frame
6 deflection roller
7 rail system
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 4
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
3. Operation
3.2 Setting up
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 5
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
3. Operation
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 6
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
3. Operation
The settings required for operation of the At the end of the shift, the printing
web monitor system are made at the machine should be switched off (see
operating elements of camera unit 1 (see operating instruction "Drive station BG
operating instruction "Video web monitor 09).
system type EUROSCOP" of the BST In addition, monitor 2 and controller 3
company. should be switched off at the
corresponding mains switch.
3.5 Starting up
At the start of a new shift, controller 3
After all the necessary settings have been and monitor 2 must be switched on again.
carried out, the printing machine can be The values last set are retained.
run up to the desired production speed.
3.6.3 Shuttung down for a longer period
3.6 Shutting down
If this unit is not to be used for a longer
period, it should be thoroughly cleaned.
3.6.1 Shutting down for a short period
Monitor 2 and controller 3 should be
switched off at the corresponding mains
During a short interruption of the
switch.
production process, no measures need to
be taken or adjustments made.
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 7
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
3. Operation
3.7 Malfunctioning
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 8
★
Base frame (overall length 390 mm)
EM 260/410/510 for video web monitoring
4.2 Care
Caution :
Risk of damaging the deflection rollers.
Deflection rollers 6 must never be cleaned
with sharp or pointed objects.
arsoma
TN_ _0104/Operating instruction 09^ 55 S17-e/09^ 55 S18-e /19.04.01 Version:/ 9