Beruflich Dokumente
Kultur Dokumente
Player
CDX-G3070UV/CDX-G3050UV
Be sure to install this unit in the dashboard of
the car for safety.
For installation and connections, see the
supplied installation/connections manual.
2GB
Additional Information
Table of Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Guide to Parts and Controls. . . . . . . . . . . . . . 4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 16
Getting Started
Detaching the Front Panel . . . . . . . . . . . . . . . 5
Switching the FM/AM Tuning Step . . . . . . . . 6
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . 6
Connecting an iPod/USB Device . . . . . . . . . . 6
Connecting Other Portable Audio
Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Playback
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . 9
Playing an iPod/USB Device . . . . . . . . . . . . . 9
Searching and Playing Tracks . . . . . . . . . . . 10
Settings
Canceling the DEMO Mode . . . . . . . . . . . . . .11
Basic Setting Operation . . . . . . . . . . . . . . . . .11
GENERAL Setup. . . . . . . . . . . . . . . . . . . . . . . .11
SOUND Setup . . . . . . . . . . . . . . . . . . . . . . . . 12
EQ3 PRESET . . . . . . . . . . . . . . . . . . . . . . . 12
EQ3 SETTING . . . . . . . . . . . . . . . . . . . . . . 12
DISPLAY Setup . . . . . . . . . . . . . . . . . . . . . . . 12
COLOR (Preset Color - Dynamic Color
Illuminator). . . . . . . . . . . . . . . . . . . . . . . . 12
CUSTOM-C (Custom Color) . . . . . . . . . . . 12
3GB
Guide to Parts and Controls
Main unit
4GB
RM-X211 Remote
Getting Started
ATT (attenuate)
Attaching the front panel
Attenuate the sound. Press again to
cancel the attenuated sound.
SOUND
Open the SOUND menu directly.
-MENU
Press and hold to open the setup menu.
()/ (+)/ (–)/ ()/ENTER
Setup items, etc. can be operated by /
//.
VOL (volume) +/–
5GB
Switching the FM/AM Connecting an iPod/USB
Tuning Step Device
Set the FM/AM tuning step of your country.
This setting appears when this unit is turned
1 Turn down the volume on the unit.
off.
2 Connect the iPod/USB device to the
unit.
1 Press MENU, rotate the control dial
To connect an iPod/iPhone, use the USB
to select [GENERAL], then press it.
connection cable for iPod (not supplied).
2 Rotate the control dial to select When connecting iPhone 5
[TUNER-STP], then press it.
6GB
Connecting Other Portable Listening to the Radio
Audio Device
Listening to the Radio
1 Turn off the portable audio device.
Tuning step setting is required (page 6).
2 Turn down the volume on the unit.
To listen to the radio, press SRC to select
[TUNER].
3 Connect the portable audio device
to the AUX input jack (stereo mini
jack) on the unit with a connecting
cord* (not supplied). Storing automatically (BTM)
* Be sure to use a straight type plug.
1 Press MODE to change the band
(FM1, FM2, FM3, AM1 or AM2).
7GB
Type of programs
Storing manually
NEWS (News), AFFAIRS (Current Affairs),
1 While receiving the station that you INFO (Information), SPORT (Sports),
want to store, press and hold a EDUCATE (Education), DRAMA (Drama),
number button (1 to 6) to display CULTURE (Culture), SCIENCE (Science),
VARIED (Varied), POP M (Pop Music), ROCK
[MEM].
M (Rock Music), EASY M (M.O.R. Music),
LIGHT M (Light classical), CLASSICS (Serious
classical), OTHER M (Other Music), WEATHER
Receiving the stored stations (Weather), FINANCE (Finance), CHILDREN
(Children’s program), SOCIAL A (Social
1 Select the band, then press a Affairs), RELIGION (Religion), PHONE IN
number button (1 to 6). (Phone In), TRAVEL (Travel), LEISURE
(Leisure), JAZZ (Jazz Music), COUNTRY
(Country Music), NATION M (National Music),
OLDIES (Oldies Music), FOLK M (Folk Music),
DOCUMENT (Documentary)
8GB
1 Connect an iPod/USB device to the
Playback USB port (page 6).
Playback starts.
If a device is already connected, to start
Playing a Disc playback, press SRC to select [USB] ([IPD]
appears in the display when the iPod is
1 Insert the disc (label side up). recognized).
To stop playback
Press and hold OFF for 1 second.
Notes
For details on the compatibility of your USB
device, visit the support site on the back cover.
Playback of the following MP3/WMA files is not
supported.
lossless compression files
copyright-protected files
DRM (Digital Rights Management) files
Multi-channel audio files
9GB
Searching by skip items
Searching and Playing (Jump mode)
Tracks
1 Press (browse)
2 Press SEEK +.
Repeat play and shuffle play
3 Rotate the control dial to select the
1 During playback, press (repeat) item.
for repeat play, or SHUF for shuffle The list is jumped in steps of 10% of the
play. total number of items.
10GB
Settings GENERAL Setup
Canceling the DEMO Mode CLOCK-ADJ (Clock Adjust) (page 6)
TUNER-STP (Tuner Step) (page 6)
You can cancel the demonstration display (Available only when the unit is turned
which appears while this unit is turned off. off.)
1 Press MENU.
11GB
SOUND Setup DISPLAY Setup
EQ3 PRESET DEMO (Demonstration)
Selects an equalizer curve from the Activates the demonstration: [ON], [OFF].
following equalizer curves or off: [XPLOD],
BLK OUT (Black Out)
[VOCAL], [EDGE], [CRUISE], [SPACE],
Turns off the illumination automatically for
[GRAVITY] (except India model),
any source (e.g., during radio reception/
[BOLLYWD] (India model only), [CUSTOM],
CD playback, etc.) if no operation is
[OFF].
performed for 5 seconds: [ON], [OFF].
The equalizer curve setting can be
To turn the light back on, press any button
memorized for each source.
on the unit or the remote commander.
EQ3 SETTING
DIMMER
Sets [CUSTOM] of EQ3.
Changes the display brightness: [ON],
Selects the equalizer settings: [LOW],
[OFF].
[MID], [HIGH].
To restore the factory-set equalizer curve, COLOR (Preset Color - Dynamic Color
press and hold ENTER before the setting is Illuminator)
complete. Sets a preset color for the display and
buttons on the main unit.
BALANCE
Selects from 12 preset colors, 1 customized
Adjusts the sound balance: [RIGHT-15] –
color and 5 preset patterns.
[CENTER] – [LEFT-15].
CUSTOM-C (Custom Color)
FADER
Registers a customized color for the
Adjusts the relative level: [FRONT-15] –
display and buttons.
[CENTER] – [REAR-15].
Selects a preset color as a basis for further
LOUDNESS (Dynamic Loudness) customizing: [RGB RED], [RGB GRN], [RGB
Reinforces bass and treble for clear sound BLUE].
at low volume levels: [ON], [OFF]. Adjustable color range: [0] - [32] ([0]
cannot be set for all color ranges).
SW LEVEL (Subwoofer Level)
DAYNIGHT
Adjusts the subwoofer volume level: [+2
Sets a different color for DAY/NIGHT mode
dB] - [0 dB] - [-2 dB].
according to the dimmer setting.
AUX VOL (AUX Volume Level) [DAY]: [DIMMER] sets to [OFF].
Adjusts the volume level for each [NIGHT]: [DIMMER] sets to [ON].
connected auxiliary device:
AUTO SCR (Auto Scroll)
[+18 dB] - [0 dB] - [-8 dB].
Scrolls long items automatically: [ON],
This setting negates the need to adjust
[OFF].
the volume level between sources.
M.DISPLAY (Motion Display)
Shows moving patterns: [ON], [OFF].
12GB
Discs with non-standard shapes (e.g.,
heart, square, star). Attempting to do so
Additional Information may damage the unit.
8 cm (3 1/4 in) discs.
Precautions
Notes on CD-R/CD-RW discs
Cool off the unit beforehand if your car has The maximum number of: (CD-R/CD-RW
been parked in direct sunlight. only)
Do not leave the front panel or audio folders (albums): 150 (including root
devices brought in inside the car, or it may folder)
cause malfunction due to high files (tracks) and folders: 300 (may less
temperature in direct sunlight. than 300 if folder/file names contain
Power antenna (aerial) extends many characters)
automatically. displayable characters for a folder/file
name: 32 (Joliet)/64 (Romeo)
Moisture condensation If the multi-session disc begins with a CD-
Should moisture condensation occur inside DA session, it is recognized as a CD-DA
the unit, remove the disc and wait for about disc, and other sessions are not played
an hour for it to dry out; otherwise the unit back.
will not operate properly. Discs that this unit CANNOT play
CD-R/CD-RW of poor recording quality.
CD-R/CD-RW recorded with an
To maintain high sound quality incompatible recording device.
Do not splash liquid onto the unit or discs. CD-R/CD-RW which is finalized
incorrectly.
CD-R/CD-RW other than those recorded
Notes on discs in music CD format or MP3 format
conforming to ISO9660 Level 1/Level 2,
Do not expose discs to direct sunlight or Joliet/Romeo or multi-session.
heat sources such as hot air ducts, nor
leave it in a car parked in direct sunlight.
Before playing, wipe the
discs with a cleaning
Playback order of MP3/WMA files
cloth from the center out.
Do not use solvents such MP3/WMA Folder (album)
as benzine, thinner, MP3/WMA file
commercially available (track)
cleaners.
This unit is designed to
play back discs that conform to the
Compact Disc (CD) standard. DualDiscs and
some of the music discs encoded with
copyright protection technologies do not
conform to the Compact Disc (CD)
standard, therefore, these discs may not be
playable by this unit.
Discs that this unit CANNOT play
Discs with labels, stickers, or sticky tape
or paper attached. Doing so may cause a
malfunction, or may ruin the disc.
13GB
About iPod
Maintenance
You can connect to the following iPod
models. Update your iPod devices to the
Replacing the lithium battery of the
latest software before use.
Made for remote commander
iPod touch (5th generation) When the battery becomes weak, the range
iPod touch (4th generation) of the remote commander becomes shorter.
iPod touch (3rd generation) Replace the battery with a new CR2025
iPod touch (2nd generation) lithium battery. Use of any other battery may
iPod classic present a risk of fire or explosion.
iPod nano (7th generation) + side up
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)*
iPhone 5
iPhone 4S Notes on the lithium battery
iPhone 4 Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
iPhone 3GS
immediately consult a doctor.
iPhone 3G
Wipe the battery with a dry cloth to assure a good
contact.
* Passenger control is not available for iPod nano
Be sure to observe the correct polarity when
(1st generation).
installing the battery.
Do not hold the battery with metallic tweezers,
“Made for iPod” and “Made for iPhone” otherwise a short-circuit may occur.
mean that an electronic accessory has
been designed to connect specifically to WARNING
iPod or iPhone respectively and has been Battery may explode if mistreated.
certified by the developer to meet Apple Do not recharge, disassemble, or dispose
performance standards. Apple is not of in fire.
responsible for the operation of this device
or its compliance with safety and
regulatory standards. Please note that the Cleaning the connectors
use of this accessory with iPod or iPhone The unit may not function properly if the
may affect wireless performance. connectors between the unit and the front
panel are not clean. In order to prevent this,
If you have any questions or problems detach the front panel (page 5) and clean the
concerning your unit that are not covered in connectors with a cotton swab. Do not apply
this manual, consult your nearest Sony too much force. Otherwise, the connectors
dealer. may be damaged.
14GB
Notes USB Player section
For safety, turn off the ignition before cleaning Interface: USB (Full-speed)
the connectors, and remove the key from the Maximum current: 1 A
ignition switch.
The maximum number of recognizable data:
Never touch the connectors directly with your
folders (albums): 128
fingers or with any metal device.
files (tracks) per folder: 512
Corresponding codec:
MP3 (.mp3), and WMA (.wma)
FM
General
Tuning range:
Outputs:
87.5 – 108.0 MHz (at 50 kHz step)
Audio outputs terminal (rear, sub)
87.5 – 108.0 MHz (at 100 kHz step)
Power antenna (aerial)/Power amplifier
87.5 – 107.9 MHz (at 200 kHz step)
control terminal (REM OUT)
FM tuning step:
Inputs:
50 kHz/100 kHz/200 kHz switchable
Remote controller input terminal
Antenna (aerial) terminal:
Antenna (aerial) input terminal
External antenna (aerial) connector
AUX input jack (stereo mini jack)
Intermediate frequency: 25 kHz
USB port
Usable sensitivity: 8 dBf Power requirements: 12 V DC car battery
Selectivity: 75 dB at 400 kHz (negative ground (earth))
Signal-to-noise ratio: 80 dB (stereo) Dimensions:
Separation: 50 dB at 1 kHz Approx. 178 mm × 50 mm × 177 mm
Frequency response: 20 – 15,000 Hz (7 1/8 in × 2 in × 7 in) (w/h/d)
AM Mounting dimensions:
Approx. 182 mm × 53 mm × 160 mm
Tuning range:
(7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d)
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step) Mass: Approx. 1.2 kg (2 lb 11 oz)
AM tuning step: Package contents:
9 kHz/10 kHz switchable Main unit (1)
Remote commander (1) : RM-X211
Antenna (aerial) terminal:
Parts for installation and connections (1 set)
External antenna (aerial) connector
Intermediate frequency: Your dealer may not handle some of the
9,124.5 kHz or 9,115.5 kHz/4.5 kHz (at 9 kHz above listed accessories. Please ask the
step)
dealer for detailed information.
9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step)
Sensitivity: 26 μV Design and specifications are subject to
change without notice.
CD Player section
Signal-to-noise ratio: 95 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Corresponding codec:
MP3 (.mp3), and WMA (.wma)
15GB
Copyrights
Troubleshooting
Quick-BrowZer is a trademark of Sony
Corporation. The following checklist will help you remedy
problems you may encounter with your unit.
Windows Media is either a registered trademark Before going through the checklist below,
or trademark of Microsoft Corporation in the check the connection and operating
United States and/or other countries. procedures.
For details on using the fuse and removing
This product is protected by certain intellectual the unit from the dashboard, refer to the
property rights of Microsoft Corporation. Use or installation/connections manual supplied
distribution of such technology outside of this with this unit.
product is prohibited without a license from If the problem is not solved, visit the support
Microsoft or an authorized Microsoft subsidiary.
site on the back cover.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in General
the U.S. and other countries.
No power is being supplied to the unit.
MPEG Layer-3 audio coding technology and If the unit is turned off and the display
patents licensed from Fraunhofer IIS and disappears, the unit cannot be operated with
Thomson. the remote commander.
Turn on the unit.
Android is a trademark of Google Inc. Use of this
trademark is subject to Google Permissions. No sound.
The position of the fader control [FADER] is
not set for a 2-speaker system.
No beep sound.
An optional power amplifier is connected and
you are not using the built-in amplifier.
16GB
The display disappears from/does not appear CD playback
in the display window.
The disc does not play back.
The dimmer is set to [DIM-ON] (page 12).
Defective or dirty disc.
The display disappears if you press and hold
OFF. The CD-R/CD-RW is not for audio use
Press OFF on the unit until the display (page 13).
appears.
MP3/WMA files cannot be played back.
The connectors are dirty (page 14).
The disc is incompatible with the MP3/WMA
The display disappears while the unit is format and version. For details on playable
operating. discs and formats, visit the support site.
The Black Out function is set to on (page 12).
MP3/WMA files take longer to play back than
others.
The operation buttons do not function.
The disc will not eject. The following discs take a longer time to start
playback.
Press DSPL and (back)/MODE for more
A disc recorded with a complicated tree
than 2 seconds to reset the unit.
structure.
The contents stored in memory are erased.
A disc recorded in Multi Session.
For your safety, do not reset the unit while
A disc to which data can be added.
you are driving.
The sound skips.
Radio reception Defective or dirty disc.
Stations cannot be received.
The sound is hampered by noises. USB playback
The connection is not correct.
You cannot play back items via a USB hub.
If your car has built-in radio antenna
(aerial) in the rear/side glass, connect an This unit cannot recognize USB devices via a
REM OUT lead (blue/white striped) or USB hub.
accessory power supply lead (red) to the
power supply lead of a car’s antenna A USB device takes longer to play back.
(aerial) booster. The USB device contains files with a
Check the connection of the car antenna complicated tree structure.
(aerial).
If the auto antenna (aerial) will not extend, The sound is intermittent.
check the connection of the power The sound may be intermittent at a high-bit-
antenna (aerial) control lead. rate of more than 320 kbps.
The tuning step setting has been erased.
Set the tuning step again (page 6).
Error displays/Messages
Preset tuning is not possible. ERROR
The broadcast signal is too weak. The disc is dirty or inserted upside down.
Clean or insert the disc correctly.
A blank disc has been inserted.
RDS
The disc cannot play due to a problem.
PTY displays [- - - - - - - -]. Insert another disc.
The current station is not an RDS station. USB device was not automatically recognized.
RDS data has not been received. Connect it again.
The station does not specify the program Press to remove the disc.
type.
HUB NO SUPRT (hubs not supported)
USB hub is not supported on this unit.
17GB
IPD STOP
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
When repeat play is not set, playback of the
If you take the unit to be repaired because of
last track in album finished.
The music application in the iPod/iPhone is
CD playback trouble, bring the disc that was
terminated. used at the time the problem began.
Press PAUSE to start playback again.
NO MUSIC
The disc or USB device does not contain a
music file.
Insert a music CD.
Connect a USB device with a music file in it.
OVERLOAD
USB device is overloaded.
Disconnect the USB device, then change
the source by pressing SRC.
The USB device has a fault, or an
unsupported device is connected.
READ
The unit is reading all track and album
information on the disc.
Wait until reading is complete and
playback starts automatically. Depending
on the disc structure, it may take more than
a minute.
[ ] or [ ]
During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
[ ]
The character cannot be displayed.
18GB
AUTOESTEREO DIGITAL AM/FM CON
REPRODUCTOR DE DISCO COMPACTO
POR FAVOR LEA DETALLADAMENTE ESTE
MANUAL DE INSTRUCCIONES ANTES DE
CONECTAR Y OPERAR ESTE EQUIPO.
RECUERDE QUE UN MAL USO DE SU APARATO
PODRÍA ANULAR LA GARANTÍA.
2ES
Información complementaria
Tabla de contenidos Precauciones. . . . . . . . . . . . . . . . . . . . . . . . . 13
Guía para las partes y los controles . . . . . . . 4 Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . 15
Especificaciones . . . . . . . . . . . . . . . . . . . . . . 15
Solución de problemas . . . . . . . . . . . . . . . . 17
Procedimientos iniciales
Extracción del panel frontal . . . . . . . . . . . . . . 6
Cambio del paso de sintonización de
FM/AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ajuste del reloj . . . . . . . . . . . . . . . . . . . . . . . . 6
Conexión de un dispositivo iPod/USB . . . . . 7
Conexión de otro dispositivo de audio
portátil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Escuchar la radio
Escuchar la radio. . . . . . . . . . . . . . . . . . . . . . . 8
Usar el RDS (Sistema de datos de radio) . . . 8
Reproducción
Reproducción de un disco . . . . . . . . . . . . . . . 9
Reproducción de un dispositivo
iPod/USB . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Búsqueda y reproducción de pistas . . . . . . 10
Ajustes
Cancelación del modo DEMO . . . . . . . . . . . .11
Operación básica de ajustes . . . . . . . . . . . . .11
Configuración GENERAL. . . . . . . . . . . . . . . . 12
Configuración SOUND . . . . . . . . . . . . . . . . . 12
EQ3 PRESET . . . . . . . . . . . . . . . . . . . . . . . 12
EQ3 SETTING . . . . . . . . . . . . . . . . . . . . . . 12
Configuración DISPLAY. . . . . . . . . . . . . . . . . 13
COLOR (color predefinido, iluminador de
color dinámico) . . . . . . . . . . . . . . . . . . . . 13
CUSTOM-C (Color personalizado) . . . . . 13
3ES
Guía para las partes y los controles
Unidad principal
4ES
DSPL (pantalla)
Para moverse entre los elementos de
Control remoto RM-X211
pantalla.
-SCRL (desplazamiento)
Manténgalo apretado para desplazarse a
un elemento de pantalla.
Toma de entrada AUX
Puerto USB
ATT (atenuar)
Para atenuar el sonido. Presiónelo
nuevamente para cancelar el sonido
atenuado.
SOUND
Abra el menú SOUND directamente.
-MENU
Manténgalo presionado para abrir el
menú de configuración.
()/ (+)/ (–)/ ()/ENTER
Los elementos de configuración, entre
otros, pueden ser operados con //
/.
VOL (volumen) +/–
5ES
Procedimientos iniciales Cambio del paso de
sintonización de FM/AM
Extracción del panel frontal
Configure el intervalo de sintonización de
Es posible extraer el panel frontal de la FM/AM de su país. La configuración aparece
unidad para evitar que la roben. cuando se apaga la unidad.
Alarma de precaución
Si gira el interruptor de la llave de encendido
hasta la posición OFF sin haber extraído el
Ajuste del reloj
panel frontal, la alarma de precaución sonará
durante unos segundos. La alarma sonará 1 Presione MENU, gire el selector de
solamente si se utiliza el amplificador control para seleccionar [GENERAL]
incorporado. y, a continuación, presiónelo.
6ES
Conexión de un dispositivo Conexión de otro
iPod/USB dispositivo de audio
1 Baje el volumen de la unidad.
portátil
2 Conecte el dispositivo iPod/USB a la 1 Apague el dispositivo de audio
unidad. portátil.
Para conectar un iPod/iPhone, use el
cable para la conexión USB para iPod (no
2 Baje el volumen de la unidad.
suministrado).
Al conectar un iPhone 5
3 Conecte el dispositivo de audio
portátil a la toma de entrada AUX
(minitoma estéreo) en la unidad
con un cable de conexión* (no
suministrado).
* Asegúrese de utilizar una clavija recta.
7ES
La búsqueda se detiene cuando la
unidad recibe una emisora. Repita este
Escuchar la radio procedimiento hasta recibir la emisora
deseada.
Escuchar la radio
Se debe ajustar el paso de sintonización Almacenamiento manual
(página 6).
8ES
Tipos de programas
Notas
Para obtener más información acerca de la
compatibilidad del dispositivo USB, visite el sitio
web de soporte técnico que figura en la cubierta
posterior.
9ES
No es posible reproducir los archivos MP3/WMA
que se indican a continuación.
archivos con formato de compresión sin Búsqueda y reproducción
pérdida
archivos protegidos por derechos de autor de pistas
archivos DRM (Gestión de derechos digitales)
archivos de audio de canales múltiples
10ES
3 Repita el paso 2 para buscar la pista
deseada. Ajustes
Se inicia la reproducción.
1 Presione (navegar)
1 Presione MENU, gire el selector de
control para seleccionar [DISPLAY]
2 Presione SEEK +. y, a continuación, presiónelo.
Operación básica de
ajustes
Puede ajustar los elementos en el menú con
el siguiente procedimiento.
Los siguientes elementos pueden ajustarse
en función de la fuente y de la configuración.
1 Presione MENU.
11ES
Las categorías de configuración son las
siguientes:
Configuración GENERAL (página 12)
Configuración SOUND
Configuración SOUND (página 12)
Configuración DISPLAY (página 13) EQ3 PRESET
Selecciona una curva del ecualizador de
3 Gire el selector de control para las siguientes curvas del ecualizador o del
seleccionar las opciones y, a modo apagado: [XPLOD], [VOCAL],
continuación, presiónelas. [EDGE], [CRUISE], [SPACE], [GRAVITY]
(excepto en modelo indio), [BOLLYWD]
(solamente en modelo indio), [CUSTOM],
Para volver a la pantalla anterior [OFF].
Presione (volver). El ajuste de la curva de ecualizador se
puede memorizar para cada fuente.
EQ3 SETTING
Establece [CUSTOM] de EQ3.
Permite seleccionar los ajustes de
Configuración GENERAL ecualizador: [LOW], [MID], [HIGH].
Para restaurar la curva del ecualizador
CLOCK-ADJ (Ajuste del reloj) (página 6) establecido de fábrica, mantenga
presionado ENTER antes de completar la
TUNER-STP (Intervalo de sintonización) configuración.
(página 6)
(Solamente está disponible cuando la BALANCE
unidad está apagada.) Permite ajustar el balance de sonido:
[RIGHT-15], [CENTER], [LEFT-15].
CAUT ALM (Alarma de precaución)
Activa la alarma de precaución: [ON], FADER
[OFF] (página 6). (Solamente está Permite ajustar el nivel relativo:
disponible cuando la unidad está [FRONT-15], [CENTER], [REAR-15].
apagada.) LOUDNESS (Sonoridad dinámica)
BEEP Refuerza los graves y agudos para obtener
Activa el sonido de los pitidos: [ON], [OFF]. un sonido claro a niveles de volumen
bajos: [ON], [OFF].
AUTO OFF
Permite apagar la alimentación SW LEVEL (Nivel del altavoz potenciador de
automáticamente una vez transcurrido un graves)
período deseado cuando la unidad está Permite ajustar el nivel de volumen del
apagada: [NO], [30S] (30 segundos), [30M] altavoz potenciador de graves: [+2 dB],
(30 minutos), [60M] (60 minutos). [0 dB], [-2 dB].
12ES
Configuración DISPLAY Información complementaria
DEMO (Demostración)
Activa la demostración: [ON], [OFF].
Precauciones
BLK OUT (Desactivación de la pantalla) Deje que la unidad se enfríe antes de
Permite desactivar la iluminación de una usarla si el automóvil ha estado
fuente automáticamente (por ejemplo, estacionado bajo la luz directa del sol.
durante la recepción de radio/ No deje el panel frontal o los dispositivos
reproducción de CD, etc.), si no se efectúa de audio dentro del vehículo o podría
ninguna operación durante 5 segundos: causar fallas en el funcionamiento debido
[ON], [OFF]. a las altas temperaturas bajo la luz directa
Para volver a encender la luz, presione del sol.
cualquier botón de la unidad o del control La antena de alimentación se extiende
remoto. automáticamente.
DIMMER
Cambia el brillo de la pantalla: [ON], [OFF]. Condensación de humedad
Si se produce condensación de humedad en
COLOR (color predefinido, iluminador de el interior de la unidad, extraiga el disco y
color dinámico) espere una hora aproximadamente hasta
Permite seleccionar un color predefinido que se haya secado por completo la unidad.
para la pantalla y los botones de la Unidad De lo contrario, la unidad no funcionará
principal. correctamente.
Permite seleccionar entre 12 colores
predefinidos, un color personalizado y 5
Para mantener una alta calidad de
diseños predefinidos.
sonido
CUSTOM-C (Color personalizado) No derrame ningún tipo de líquido sobre la
Permite registrar un color personalizado unidad o los discos.
para la pantalla y los botones.
Permite seleccionar un color predefinido
como base para el posterior
personalizado: [RGB RED], [RGB GRN], Notas sobre los discos
[RGB BLUE].
No exponga los discos a la luz solar directa
Gama de colores ajustables: [0] - [32] ([0]
ni a fuentes de calor como, por ejemplo,
no se puede utilizar para todas las gamas
conductos de aire caliente, ni los deje en el
de colores).
automóvil estacionado bajo la luz solar
DAYNIGHT
directa.
Permite definir un color diferente para
Antes de reproducir los
DAY/NIGHT según el ajuste del atenuador.
discos, límpielos con un
[DAY]: [DIMMER] se ajusta a [OFF].
paño de limpieza. Hágalo
[NIGHT]: [DIMMER] se ajusta a [ON].
desde el centro hacia los
AUTO SCR (Desplazamiento automático) bordes. No utilice
Permite desplazarse por los elementos de disolventes como
la pantalla automáticamente: [ON], [OFF]. bencina, diluyentes ni
productos de limpieza
M.DISPLAY (Desplazamiento de
disponibles en el mercado.
indicaciones)
Permite mostrar patrones en movimiento:
[ON], [OFF].
13ES
Esta unidad se diseñó para reproducir
discos que cumplen con el estándar Orden de reproducción de los
Compact disc (CD). Los DualDisc y otros archivos MP3/WMA
discos de música codificados con
tecnologías de protección de derechos de MP3/WMA Carpeta (álbum)
autor no cumplen con el estándar Compact
disc (CD), por lo que no podrán Archivo MP3/WMA
(pista)
reproducirse con esta unidad.
Discos que NO se pueden reproducir en
esta unidad
Discos con etiquetas, autoadhesivos o
cinta adhesiva o papeles adheridos. Si
utiliza este tipo de discos, puede
provocar una falla de funcionamiento o
dañar el disco.
Discos con formas no estandarizadas
(por ejemplo, formas de corazón,
cuadrado o estrella). Si lo intenta, puede
dañar la unidad.
Discos de 8 cm. Acerca de iPod
Puede conectarse a los siguientes modelos
Notas sobre los discos CD-R/CD-RW de iPod. Actualice sus dispositivos iPod a la
Número máximo de: (solamente CD-R/ última versión de software antes de
CD-RW) utilizarlos.
carpetas (álbumes): 150 (incluida la Made for
carpeta raíz) iPod touch (5ª generación)
archivos (pistas) y carpetas: 300 (si los iPod touch (4ª generación)
nombres de carpeta o archivo contienen iPod touch (3ª generación)
muchos caracteres, este número puede iPod touch (2ª generación)
ser inferior a 300) iPod classic
caracteres que se pueden visualizar en el iPod nano (7ª generación)
nombre de una carpeta o archivo: iPod nano (6ª generación)
32 (Joliet)/64 (Romeo) iPod nano (5ª generación)
Si un disco multisesión empieza con una iPod nano (4ª generación)
sesión CD-DA, se reconoce como un disco iPod nano (3ª generación)
CD-DA y las otras sesiones no se iPod nano (2ª generación)
reproducen. iPod nano (1ª generación)*
Discos que NO se pueden reproducir en iPhone 5
esta unidad iPhone 4S
CD-R/CD-RW de calidad de grabación iPhone 4
deficiente. iPhone 3GS
CD-R/CD-RW grabados con un iPhone 3G
dispositivo de grabación no compatible.
CD-R/CD-RW no finalizados * El control de pasajero no se encuentra disponible
correctamente. para iPod nano (1ª generación).
CD-R/CD-RW que no se hayan grabado
en formato CD de música o en formato
MP3 que cumpla la norma ISO9660 Nivel
1/Nivel 2, Joliet/Romeo o multisesión.
14ES
“Made for iPod” y “Made for iPhone”
ADVERTENCIA
indican que un accesorio electrónico se
La pila puede explotar si no se emplea
diseñó para conectarse específicamente a
adecuadamente.
los dispositivos iPod o iPhone
No recargue la pila; tampoco la desmonte
respectivamente, y que el fabricante
ni la arroje al fuego.
obtuvo la certificación necesaria para que
cumpla con los estándares de rendimiento
de Apple. Apple no se hace responsable Limpieza de los conectores
del funcionamiento de este dispositivo en Es posible que la unidad no funcione
cumplimiento de los estándares de correctamente si los conectores entre ésta y
seguridad y normativa. Tenga en cuenta el panel frontal están sucios. Para evitar esta
que el uso de este accesorio con el iPod o situación, extraiga el panel frontal (página 6)
el iPhone puede afectar al rendimiento y limpie los conectores con un hisopo de
inalámbrico. algodón. Realice esta operación con
suavidad. De lo contrario, los conectores
Si desea realizar alguna consulta o
podrían resultar dañados.
solucionar algún problema relativo a la
unidad que no se trate en este manual,
póngase en contacto con el distribuidor Sony
más cercano.
Notas
Mantenimiento Por razones de seguridad, apague el motor antes
de limpiar los conectores y extraiga la llave del
interruptor de la llave de encendido.
Sustitución de la pila de litio del control No toque nunca los conectores directamente con
remoto los dedos ni con ningún dispositivo metálico.
El alcance del control remoto disminuye a
medida que se agota la pila. Sustitúyala por
una pila de litio CR2025 nueva. El uso de
cualquier otra pila podría provocar un
incendio o una explosión. Especificaciones
Lado + hacia arriba
Sección del sintonizador
FM
Rango de sintonización:
87,5 – 108,0 MHz (a intervalos de 50 kHz)
87,5 – 108,0 MHz (a intervalos de 100 kHz)
87,5 – 107,9 MHz (a intervalos de 200 kHz)
Notas sobre la pila de litio Paso de sintonización de FM:
Mantenga la pila de litio fuera del alcance de los 50 kHz/100 kHz/200 kHz conmutables
niños. Si se ingiriese, póngase en contacto Terminal de antena:
inmediatamente con un médico. Conector de antena externa
Limpie la pila con un paño seco para garantizar un Frecuencia intermedia: 25 kHz
contacto óptimo.
Sensibilidad útil: 8 dBf
Asegúrese de respetar la polaridad al instalarla.
No sujete la pila con pinzas metálicas, ya que Selectividad: de 75 dB a 400 kHz
podría producirse un cortocircuito. Relación señal-ruido: 80 dB (estéreo)
Separación: de 50 dB a 1 kHz
Respuesta de frecuencia: 20 – 15 000 Hz
15ES
AM Dimensiones:
Rango de sintonización: Aprox. 178 mm × 50 mm × 177 mm
531 – 1 602 kHz (a intervalos de 9 kHz) (an./al./prf.)
530 – 1 710 kHz (a intervalos de 10 kHz) Dimensiones de montaje:
Paso de sintonización de AM: Aprox. 182 mm × 53 mm × 160 mm
9 kHz/10 kHz conmutable (an./al./prf.)
Terminal de antena: Peso: Aprox. 1,2 kg
Conector de antena externa Contenidos del paquete:
Frecuencia intermedia: Unidad principal (1)
9 124,5 kHz o 9 115,5 kHz/4,5 kHz (a intervalos Control remoto (1): RM-X211
de 9 kHz) Componentes de instalación y conexiones
9 115 kHz o 9 125 kHz/5 kHz (a intervalos de (1 juego)
10 kHz)
Sensibilidad: 26 μV Es posible que su distribuidor no
comercialice algunos de los accesorios que
Sección del reproductor de CD figuran en la lista anterior. Solicite
información detallada.
Relación señal-ruido: 95 dB
Respuesta de frecuencia: 10 – 20 000 Hz El diseño y las especificaciones están sujetos
Fluctuación y trémolo: Inferior al límite medible a cambios sin previo aviso.
Códices correspondientes:
MP3 (.mp3) y WMA (.wma)
16ES
ajustada, se iniciará el modo de
demostración.
Solución de problemas Ajuste [DEMO-OFF] (página 13).
17ES
No es posible utilizar la sintonización Mensajes/indicaciones de error
programada.
ERROR
La señal de emisión es demasiado débil.
El disco está sucio o se insertó al revés.
Límpielo o insértelo de forma correcta.
RDS Se insertó un disco vacío.
PTY muestra [- - - - - - - -]. No es posible reproducir el disco debido a un
problema.
La emisora actual no es una emisora RDS.
Inserte otro disco.
No se recibieron datos RDS.
El dispositivo USB no ha sido reconocido
La emisora no especifica el tipo de programa.
automáticamente.
Conéctelo nuevamente.
Reproducción de CD Presione para extraer el disco.
18ES
READ
La unidad está leyendo toda la información
de pistas y de álbumes del disco.
Espere hasta que finalice la lectura y se
inicie la reproducción automáticamente. Es
posible que demore más de un minuto en
función de la estructura del disco.
[ ]o[ ]
Durante la operación de retroceso o avance
rápido, ha llegado al principio, por lo que no
es posible continuar dicha operación.
[ ]
No se puede mostrar el carácter.
19ES
Support site Sitio Web de soporte técnico en línea
If you have any questions or for the latest support Para resolver cualquier duda u obtener la información
information on this product, please visit más reciente sobre el soporte técnico de este producto,
the web site below: visite el siguiente sitio Web:
http://www.sony.net/
©2013 Sony Corporation Printed in Thailand