Beruflich Dokumente
Kultur Dokumente
1. The body which does not undergoes any changes in its dimension when subjected to
loads is called as :
a) Elastic Body
b) Rigid body
c) Plastic Body
d) None of the above.
2. The branch of mechanics which deals with the particles and bodies at rest is called
as:
a) Statics
b) Dynamics
c) Kinematics
d) Kinetics
3. The point of application of the force can be transmitted anywhere along its line of
action but within the body shows:
a) Varignon’s theorem of moment
b) Lami’s Theorem
c) Principle of transmissibility
d) All of above
4. An external agency which produces or tends to produce , destroys or tends to
destroy the motion is called
a) Pressure
b) Work
c) Force
d) Weight
5. Resultant force is equal in magnitude and opposite in direction with :
a) Couple
b) Equilibrant force
c) Pressure
d) None of the above
6. ΣFX= 0 ;ΣFY= 0 Therefore R = 0 Shows
a) Condition for equilibrium for concurrent forces
b) Condition for equilibrium for Non -concurrent forces
c) Condition for equilibrium for collinear forces
d) All of the above
7. When a system of forces acting on body in equilibrium , then resultant force is,
a) Same
b) Varied
c) Zero
d) None of these
8. How many forces are acting on a body at a point in Lami’sTheorem
a) Two
b) Five
c) Three
d) Four
9. Vector diagram must be closed figure shows
a) Analytical condition of equilibrium
b) Graphical condition of equilibrium
c) Condition of equilibrium for concurrent forces
d) None of the above
10.Identify the following beam as shown in figure.
a) Cantilever beam
b) Propped cantilever Beam
c) Overhang Beam
d) None of these
11. The branch of mechanics which deals with the particles and bodies which are In
motion is called as …
a) Kinematics
b) Kinetics
c) Dynamics
d) Statics
12. The forces which are acting along the same straight line are called as...
a) Non Collinear forces
b) Collinear forces
c) Concurrent Forces
d) Parallel Forces
13. How many forces are acting on a body at a point in Lami’s Theorem
a) Five
b) Three
c) Four
d) Two
14. An angle of inclined plane with horizontal at which the body is just on the point of
motion with its own weight is called as
a) Angle of Static friction
b) Angle of Kinetic friction
c) Angle of Repose
d) None of these
15. Name the truss for the condition m > 2 j – 3
a) Redundant truss
b) Perfect truss
c) Imperfect truss
d) None of the above
16. The ratio of limiting friction to normal reaction is called as,
a) Static friction
b) Coefficient of friction
c) Kinetic friction
d) None of the above
17. Equilibrant keeps the body
a) In equilibrium
b) In Motion
c) In Vertical position
d) In Downward position
18. What is the moment of couple and its nature for given force system shown in figure?
a) 60 N.m Clockwise
b) 20 N.m Clockwise
c) Zero
d) 50 N.m Anticlockwise