Beruflich Dokumente
Kultur Dokumente
FILTRATION
PETRO
petroind.com
www.
pet
roi
nd.
com
Table of Contents
3 Why Do I Need Clean Fuel?
4 What is Clean Fuel?
6 How Do I Get Clean Fuel?
8 Clean Diesel Kits
9 Clean Diesel Carts
10 Fuel and Lubricants Filters
12 Filter Heads
14 Manifolds
16 Bulk hP Filters and Heads
18 Clean DEF Filter
20 T.R.A.P.™ Breather
22 Reservoir Air Dryer
24 Accessories
26 System Sizing and Design
30 Filter Flow Rates and Pressure Drops
DIESEL IS
As diesel travels from refinery
DIRTY.
to terminal locations to local bulk
storage and finally to your bulk
tank, it picks up contamination that
is deadly to today’s engines.
BAD.
delivers diesel that meets or
exceeds fuel-industry standards for
cleanliness. This may not be clean
enough for your equipment.
MORE.
ever touches your equipment,
you’ll minimise costly downtime,
Keep Running and Achieve More.
SIZES OF FAMILIAR
PARTICLES IN MICRONS
100 µm Grain of Table Salt
80 µm Human Hair
40 µm Lower Limit of Visibility
25 µm White Blood Cell
10 µm Talcum Powder
8 µm Red Blood Cell
2 µm Bacteria
<.5 µm Silt
1
Select the right filter to achieve
stop flow if large amounts of free water are
targeted ISO cleanliness. Proper
detected in your ethanol-free fluids. Designing
design of the system will help avoid
systems with water absorbing filters requires
unnecessary costs.
careful sizing considerations. A Donaldson
specialist will assist in configuring a system
2
Determine the working pressure of
that meets your specific needs for flow and the system and select the filter
pressure drop. range compatible with that
pressure.
3
Different types of fluids have
different properties. Fluid viscosity
plays an important role in restricting
the flow through filters. Select a
filter that has compatible media-to-
fluid properties and will maintain
adequate flow and avoid excessive
pressure drops. See pages 30-31 for
filter flow rates and pressure drops.
Donaldson Delivers
Clean. Protect.
Donaldson single-pass filtration on the inlet removes Water absorbing filters, T.R.A.P.™ Breathers and Reservoir
contamination before it can enter your storage tank Air Dryers reduce the risk of moisture and contaminants
and contaminate it. entering a bulk storage tank so fluids are kept clean and
dry. Used together, they’ll help guard fluids from free
Compact and easy to replace, Donaldson filters are an
water, airborne contamination and microbial growth for
important line of defense in maintaining fluid quality and
as long as they stay in storage.
can be configured for high flow rates while minimizing
pressure drop.
P R OT E C
CLEAN T
POLISH
Polish.
Unstable fluids and the tank itself can be a source of
contamination. Final filtration on the outlet with Donaldson
filters ensures that targeted ISO cleanliness levels are
achieved before fluids are pumped into your equipment.
Achieve More.
These kits are easy to install on any fuel dispenser and come with
everything needed to filter out even the finest contaminants before
they can enter your equipment’s fuel system. With the included
easy-to-follow, step-by-step instructions, you’ll have effective,
efficient filtration in minutes.
P506073
Series Filtration
For flow rates up to
50 GPM / 189 LPM For complete
The Clean and Dry
Diesel Kit removes fuel
protection
contamination and stops We recommend installing a T.R.A.P.
water.This set uses two
Breather to keep airborne contamination and
high performance filters, in
moisture from entering your tank. Select
series, to clean your diesel
fuel ready for use. from one of the following;
Mobile Tanks
Off-Line Filtration
Donaldson provides off-line filtraion and fluid transfer
capabilities in convenient portable packages.
Fluid Compatibility All diesel fuels Hydraulic, gear, transmission and engine oils
Micron Rating & Efficiency <4 micron @ Beta 2000 25 miron @ Beta 2000 14 micron @ Beta 2000
Water Absorbing Filter Stops all free and emulsified water (optional for P506037) n/a
FEATURES APPLICATIONS
• Highly efficient, state-of-the-art filter media and design • Single pass filtration for clean fluid transfers
• Unsurpassed filter efficiency • High efficiency kidney looping
• Cleans to target ISO cleanliness in a single pass • Inlet and outlet filtration at bulk storage tanks
• Modular design can be configured for • Dispenser “polishing” filtration on fuel pumps
virtually any flow rate or usage level and hose reels
• Fast and easy to service • Mobile and stationary applications
D.E.R.T.™
Donaldson Electrostatic Reduction Technology
Electrostatic discharge can be created when diesel fuel or light oils pass
through filter media at high flow rates.
The fluid being filtered may have inadequate conductivity to dissipate the
charge generated by high flow filtration applications. The electrical charge
can build-up in the fluid until it discharges or sparks across the filter,
burning holes in the filter media and letting through harmful contaminants.
Donaldson’s proprietary Electrostatic Reduction Technology neutralizes
Filter media damage from electrical charge and prevents damage to the filter media. This enables
Electrostatic Discharge (ESD). efficient single pass fuel filtration in high flow applications.
Transmission
Fluid Engine and Ethanol-free
All diesel fuels and
Compatibility gear oil fluids
hydraulic oil
Recommended
< 100 cSt < 500 cSt < 6000 cSt <1500 cSt
Viscosity Range
Working
350 psi / 2413 kPa / 24.1 bar
Pressure
Element Collapse
150 psi / 1034 kPa / 10.3 bar
Pressure
Rated Static
800 psi / 5516 kPa / 55.2 bar
Burst
Max. Flow
32 gpm / 121 lpm 65 gpm / 246 lpm
Range**
D.E.R.T.*** Yes No
-40 to
Operating
-40 to 245 °F / -40 to 118 °C 190 °F / -40 to 245 °F / -40 to 118 °C
Temperature
-40 to 88 °C
*
Select the proper filter by fluid type and OE recommended ISO code. Do not over-filter fluids. Doing so may result in the stripping of beneficial additive.
**
Actual flow rate varies based on fluid viscosity, pumping pressure and filter loading.
***
DERT ™ Donaldson Electrostatic Reduction Technology prevents media damage during high flow fuel applications.
Filter Heads
Clean Solutions filter heads feature robust, aluminum construction
with steel inserts to minimize metal-to-metal galling between
the head and the filter, even when used with diesel fuel.
FEATURES APPLICATIONS
• Steel inserts are safe to use with diesel fuel • For use with Clean Solutions filters
• Threads contain an O-ring to completely seal • Compatible with all diesel fuels and lubricants
the clean side from the dirty side of the filter
• Heads are pre-ported for optional pressure
gauges and service indicators
Filter Quantity* 1 1 2 2
125 gpm /
Max. Flow Range** 65 gpm / 246 lpm
473 lpm
Operating
-40 to 245 °F / -40 to 118 °C
Temperature
39.1
[1.54] 0 0.0
73.2 0 20 40 60 80 100 120
[2.88]
Flow Rate (GPM)
19.1 [0.75]
SAE-20 O-RING
or 1¼” NPTF
P568583 | P574958
0.6
300.7
[11.84]
127.8 203.2
[5.03] [8.00] 0.4
DIRECTION 0.2
0 0.0
0 20 40 60 80 100 120
3/8 -16 UNC
4-PLACES Flow Rate (GPM)
INDICATOR
PORT 57.7
[2.27]
50.8
[2.00] Single Filter Head Pressure Drop
91.4
[3.60]
Flow Rate (LPM)
0 100 200 300 400
12
0.8
1 1/2” 19.05 [.75]
SAE 4-BOLT
CODE 61 FLANGE
0.6
Pressure Drop (BAR)
8
Pressure Drop (PSI)
0.4
Dual Head With
Parallel Flow Path 4
Manifolds
Clean Solutions Filter Manifolds expand capacity or increase flow
rate beyond the capability of a single or dual filter head. Two or
more manifolds can be plumbed together to accommodate even
larger flow rates.
Filter Quantity** 4 8 10 Up to 12
2" ANSI
Mounting Connection 4" ANSI 150 Flange
150 Flange
250 gpm / 500 gpm / 1893 600 gpm / 2271 700 gpm / 2650
Max. Flow Range***
946 lpm lpm lpm lpm
Accessories
Pressure Gauges 2 pcs 0-160 psi / 0-11 bar gauges included
Sold Separately
152 psi /
Working Pressure 1050 kPa /
10.5 bar
No external
Construction Painted carbon steel pipe with aluminum heads
aluminum
FEATURES APPLICATIONS
• Fast, easy and safe to service • Bulk fuel and lubricant filtration and water removal
• Requires no electrical or air hook-ups • High flow transfer into or out of tanks and dispensing equipment
• Large capacity in small footprint • Hard-to-filter high viscosity oils
• Flexible mounting options (horizontal or vertical) • Inline industrial filtration of gear oils and lubricants
• Cost effective high capacity system • Kidney loop applications
4 Filter Manifold
P561880 Manifold Pressure Drop
Flow Rate (LPM)
569.5 0 500 1000 1500 2000 2500
[22.42]
20
P561880
DOWNSTREAM 1.2
M16 X 2
DOWNSTREAM MINI MESS 16
M16 X 2 TEST PORT
MINI MESS 1
0.6
DIRECTION
8
OF FLOW
0.4
0 0
2” ANSI 150 2” ANSI 150 0 100 200 300 400 500 600 700
FLANGE FLANGE
Flow Rate (GPM)
784.4
[30.88]
444.5
[17.5]
UPSTREAM
M16X2
MINI MESS
DIRECTION TEST PORT
OF FLOW 2X BLEEDER VALVES
DIRECTION
OF FLOW
UPSTREAM DOWNSTREAM DIRECTION 165.3
M16 X 2 M16 X 2 OF FLOW [6.51]
MINI MESS MINI MESS
TEST PORT TEST PORT
UPSTREAM DOWNSTREAM
M16 X 2 M16 X 2
MINI MESS MINI MESS
TEST PORT TEST PORT
746.8 416.8
[29.40] [16.41]
UPSTREAM
150 M16X2
[5.91] MINI MESS
TEST PORT
114.3
[4.50]
Service shops use high pressure pumps to force oil through long
lengths of piping and hose reels prior to dispensing into equipment.
Donaldson Bulk hP filters remove contaminants delivered in oil and
picked up in storage or delivery lines during final transfer. They
ensure the required ISO cleanliness level is met every time.
hP Single hP Head
Head with Bypass
Indicator Yes
Yes - 50 psi /
Bypass Valve No
345 kPa / 3.4 bar
Working Pressure 1000 psi / 6894 kPa / 68.9 bar 800 psi / 5756 kPa / 55 bar
Element Collapse
300 psi / 2068 kPa / 20.7 bar
Pressure
Rated Static Burst 2200 psi / 15,168 kPa / 151.7 bar 1700 psi / 11721 kPa / 117 bar
FEATURES APPLICATIONS
• Up to 1000 psi / 6894 kPa / 68.9 bar working pressure • Lube shops
• Extended life filters with high dirt holding capacity • Mobile service trucks
• Easy disposal with recyclable can and incinerable element • Other higher pressure single pass applications
• Compact design requires only 1.5" / 38 mm
clearance for servicing
35.1
[1.38]
66.5
[2.62] 0 0
109.5 0 10 20 30 40 50
[4.31]
19.0
Flow Rate (GPM)
SAE-16
[.75] O-RING
Bulk hP Filters
P565184 | P565185 | P565183
94.1
[3.70]
250.8
[9.88]
CLEARANCE FOR
38.1 FILTER CHANGEOUT
[1.50]
The Donaldson DEF filter catches contaminants before they reach your
vehicle or equipment and the onboard DEF filter. Clean DEF ensures proper
function of the SCR and extends the life of the onboard DEF filter.
SCR
DEF
NOx Reduc
tion
DPF Pre-Filter
DEF Filter
3 0.2
0.1
0 0
0 2 4 6 8 10
Flow Rate (GPM)
2X 1/4” NPT
GAUGE PORT
18.2
63.5 [.72]
[2.50] 347.7
[13.69]
CLEARANCE FOR
20.1 FILTER CHANGEOUT
[.79] 25.4
[1.00]
2 x 1” BSPT
104.8
[4.13]
DEF IS HIGHLY CORROSIVE. All pipe fittings must be compatible with DEF.
Most plastics as well as stainless steel are acceptable. Carbon steel, zinc,
aluminum, brass, copper, etc. are not recommended due to undesirable
chemical reactions. If any of these materials are used in your system they
should be immediately replaced with a compatible material.
T.R.A.P.™ Breather
The Thermally Reactive Advanced Protection (T.R.A.P.) Breather
assembly protects the fluids in your storage tank from airborne
particulate moisture contamination and ambient moisture.
Keep your fluids clean and dry with a Donaldson T.R.A.P. Breather.
T.R.A.P.
Breather
-40 to 200 °F /
Operating Temperature
- 40 to 93 °C
FEATURES
T.R.A.P. Breather Restriction
• High efficency air filtration Flow Rate (LPM)
• Longer life and lower airflow restriction than typical 0 200 400 600 800 1000 1200 1400
8
silica gel breathers
• Self-regenerating moisture adsorption 1.6
6
• Easy to service
0.8
APPLICATIONS 2
T.R.A.P. Breather
DFF0078
Ø176.5
[6.95]
D
MOIST AIR
RY
DRY AIR
AIR
MOIST AIR
T.R.A.P TM
SEPERATES HERE
FOR SERVICING
When combined with a T.R.A.P. Breather, the complete system keeps moisture and
contamination out, even if fluid flow rate out of the tank surpasses the Reservoir Air
Dryer flow rate into the tank.
Inlet Air required @ 100 psi 0.8 scfm (22.7 slpm) maximum
The Reservoir Air Dryer is not recommended for use on gasoline holding tanks or for the head space of any flammable liquid (Flash Point of 100F/38C)
*
FEATURES
• The clean, dry air sweep dehydrates the reservoir headspace and removes
dissolved moisture from exposed oils and fuels*
• Operates with standard plant air; instrument quality air is not required.
• Submicron coalescing air filter collects oil and water droplets and fine
particles from inlet air
• Automatic drain purges captured liquid with no intervention required
• Visual indicator monitors filter condition
• Membrane air dryer reduces plant air dew point by as much as 150 °F (83 °C)
• Pressure regulator depressurizes the air and ensures that the proper flow
rate of air is introduced into the reservoir
APPLICATIONS
• Lubricant system reservoirs
• Diesel storage tanks
• Oil storage tanks
• Gear boxes
• Hydraulic system reservoirs
The Reservoir Air Dryer is not recommended for use on
*
AIR OUTLET
1/4" NPT
19 in (48 cm)
AIR INLET
1/4" NPT
Accessories
PARTS
Part Number Description Application
DFF1005 I-12 Blanking Cap Blank off up to 6 orifices on I-12 manifold for flush mounting
P573642 Threaded Pipe Nipple 11/4" NPT, for connecting two P570330 single heads in series
Small oil tanks under 250 gal. / 1000 liters, 1" NPT,
P564669 ABS Breather, 3 Micron
splash containment for mobile applications
P506076 SAE 20 O-ring 1” BSPT Male Adapts P570329 Single filter head to 1” BSPT male
P574177 Visual Service Indicator 50 psi / 345 kPa / 3.45 bar For single heads and hP heads, industrial grade green to red
P165965 Visual Service Indicator 25 psi / 172 kPa / 1.72 bar For single heads and hP heads, industrial grade green to red
P573682 Upstream Pressure Gauge Adapter For single and dual heads, 1/8" NPT
For single and dual heads, 1/8" NPT, center back mount,
P573681 Pressure Gauge, 0 – 60 psi / 414 kPa / 4.1 bar
1½" diameter, use with P573682 adapter
SAMPLING TOOLS
Part Number Description Application
P563212 Test Point For all Clean Solutions manifolds, 1/8" NPT to M16 x 2
P563215 Test Point For dual heads, ¼ BSPP to M16 x 2, use with P506071
flange, P506037 B.O.S.S. and P506057 Bu.F.S.S.
TEST KIT
Part Number Description Application
X009329 Patch Test Kit Test kit for measuring fluid cleanliness
P567869 0.8 Micron Membrane Filter Spares for Patch Test Kit, purchase in multiples of 100
P567860 Solvent Dispensing Filter Spares for Patch Test Kit, purchase in multiples of 1
P567865 Analysis Cards Spares for Patch Test Kit, purchase in multiples of 50
The colder the fluid, the higher the viscosity, so the lowest potential
WATER HONEY
temperature of the fluid during filtration is the best measure for sizing
a bulk filtration system. Due to the high specific heat capacity of fluids, Temperature greatly impacts fluid
viscosity. Consider that ISO 32
the lowest ambient temperature may not be an accurate reflection of the oil at 104 °F / 40 °C has the same
actual fluid temperature. Avoid oversizing your system by using the stored viscosity as diesel fuel (similar to
water). When temperatures drop
fluid temperature and not the lowest ambient temperature, which tends to
to -4 °F / -20 °C, the viscosity
be lower than the temperature of the fluid in storage or transport. of that ISO 32 oil increases
dramatically to over 2,000
centistokes, which is similar to
honey at room temperature.
The chart below demonstrates the pressure drop experienced by a filter with
various viscosities and flow rates. The steeper the pressure drop curve, the more
filters that must be added to the system. Additional filters plumbed in parallel will
decrease the flow rate per filter, lowering the pressure drop and allowing existing flow
rates to be maintained.
2.0 250
32 1.5
cSt cSt
20
1.6
1.0
Fewer
1.2
Filters
0.8 10
© Donaldson Company, Inc.
0.5
3
cSt 0.4
0 0 0.0
25 30 35 0 10 20 30 40 50 60
Flow Rate (GPM)
1 2
Define product flow rate, fluid type and Use the table on the page 26 to
pressure drop restriction. New systems determine fluid viscosity using the fluid
should ideally have the lowest practicable type and temperature.
pressure drop.
INFORMATION GATHERING
FLOW RATE:
FLUID TYPE:
PRESSURE DROP:
TEMPERATURE:
3 4
Select the appropriate filter based Determine the filter pressure drop using
on desired ISO cleanliness code and the flow rate and the fluid viscosity
working pressure (see pages 10 and 11). according to the appropriate chart on pages
30 – 31. Add the manifold pressure drop
using the flow rate on page 15 to calculate
total pressure drop.
(BAR)(BAR)
(BAR)
cSt 2.0
(PSI) (PSI)
(PSI) (PSI)
2.0
(BAR)
Drop (PSI)
32
Drop Drop
Drop Drop
Drop
20 20
150 cSt
Drop
90 20
cSt 1.5 cSt 1.61.5
Pressure
Pressure
Pressure
20
Pressure
20
150
Pressure
1.0 20
Pressure
1.0
cSt 32 1.2
Pressure
Pressure
Pressure
Flow Rates and Pressure Drops
10 1.0 cSt
10 1.0
Inc.
320.8
Inc.
0.5 1010 cSt0.5
Company,
10
Company,
3
Donaldson
0 0.0 0 3 cSt 0.0
Donaldson
FUEL AND WATER ABSORBING FILTERS 0 10 20 30 40 50 60 0 (Diesel) 0 0
00 510 10 20 15 30 20 40 25 5030 60
35 0
0 0.0 0 0.0
©©
Flow Rate (GPM) Flow Rate (GPM)
0 10 20 30 40 50 60 0 10 20 Flow Rate30(GPM) 40 50 60
Flow Rate (GPM) Flow Rate (GPM)
DBB8777--Compact
DBB5333 Winter Fuel Filter
Fuel Filter DBB8666--Heavy
DBB8664 Fuel Filter
Oil Filter
DBB8777 -Flow
Winter
Flow Rate Fuel Filter
(LPM)
Rate (LPM) DBB8666
DBB8665 -Flow
Flow -Rate
Light
Rate Fuel
(LPM)
OilFilter
(LPM) Filter
00 20 50 40 10060 80150 100 200 120 0 0 50 50 100100 150 150 200 200
40
50 Flow Rate (LPM) 40 40 Flow Rate (LPM)
1500 750 250 Flow Rate (LPM)
0 50 cSt 100 150 200 1500 6000
750 250
cSt cSt 2.53.2 00 cStcSt
cSt
50
50
cSt
100
10090 150
150 60
200
200 2.5 2.5 0
40 40 cSt cSt
1500 40 40
750 cSt 250 1500 7503000 250 750
90
150 cSt 2.8 3000 1500 500 1
40 cSt cSt 2.5 cSt 60
30 cSt
30 30
cSt cSt cStcSt cSt
cSt cSt
cSt 2.52.5
2.0 1500 750 500 2.0 2.0
2.4 cSt cSt 250
150 cSt cSt cSt
Drop (BAR)
30 32
Drop (BAR)
(PSI)
30 200
Drop (PSI)
(BAR)
(BAR)
20 32 1.5
20 cSt
(PSI)
DropDrop
cSt
Drop (BAR)
DropDrop
Drop(PSI)
90 cSt 1.51.5
Pressure
Pressure
Pressure
Pressure
20
Drop
20 1.0
Pressure 20
20 1.0 20
1.2 20
150 1.0
cSt
cSt
Pressure
32 cSt
Pressure
Pressure
Pressure
10
Pressure
1.0 10
10 1.01.0
© Donaldson Company, Inc.
Company, Inc.
0.8
© Donaldson Company, Inc.
0.5
0.4
Company, Inc.
(Diesel) 0.5
3 cSt 0.50.5
© Donaldson
0 0.0 0
00 3 cSt (Diesel)0.0 0.0
10 20 30 40 50 60 0 0
0
10 20 30 40 50 60
0 5 10 15 20 25 30 (Diesel) 35 0 10 20 30 40 50 60
© Donaldson
0 Flow 0.0
FlowRate
Rate(GPM)
(GPM) 00 Flow Rate (GPM) 0.00.0 0
0 10 20 30 40 50 60 00 10
10 2020 Flow Rate
3030 (GPM)4040 5050 6060 0
Flow Rate (GPM) Flow
Flow Rate
Rate (GPM)
(GPM)
cSt
Drop (PSI)
(BAR)
10
Drop (PSI)
(BAR)
250 0.8
Pressure
1.5
Pressure
20 1.5
Drop
10 20 cSt 1.5 20
Drop
1.6
Drop
20 32 cSt 20
150 0.4
Pressure
Pressure
Pressure
cSt
Pressure
5
Pressure
1.2 1.0
Pressure
© Donaldson Company, Inc.
1.0
1.0 1.0
10 3 cSt 32 cSt 0.4 32 cSt 32
0.8 5 3 cSt 10 10
© Donaldson Company, Inc.
(Diesel) cSt
Inc. Inc.
10
0.5 0.5
3 cSt 3 cSt
0 5 10 15 (Diesel) 20 (Diesel)3 cSt
(Diesel)
© Donaldson
0 (Diesel)
00 Flow Rate (GPM) 00.0 0 0.0 0
© Donaldson
5 0 0 60 0.0
0
10
5
20 30
10
40
15
50
20 00 10 20 30 40 50 60 0.0
0
0 10 20 30 40 50 60 0 10 20 30 40 50 60
Flow
Flow Rate
Rate (GPM)
(GPM) Flow Rate (GPM)
Flow Rate (GPM) Flow Rate (GPM)
2.0 2.0
320.8
(BAR)
cSt
(BAR)
(PSI)
10
90 cSt90 1.5 1.5
Drop
Drop
Drop
20 20
cSt
Pressure
Pressure
32 cSt
Pressure
1.0 1.0 5
© Donaldson Company, Inc.
32 cSt32
10 cSt 10
Inc.Inc.
10 3 cSt
© Donaldson Company, Inc.
0.5 3 cSt
© Donaldson Company, Inc.
(Diesel) 0.5
Company,
3 cSt (Diesel)
0 0
3 cSt
(Diesel)
(Diesel)
© Donaldson
0 0.0 0 5 10 15 20
0 0.0
© Donaldson
0.0 0 0.0
0 10 20 30 40 50 60 0 10 20Flow Rate (GPM)
30 40 50 60
0 0 10 20 30 40 50 60
Flow Rate (GPM) Flow Rate (GPM)
Flow Rate (GPM)
DBB7733 DBB8666
- Compact Winter
- Fuel Fuel Filter
Filter
Flow Rate (LPM)
0 20 Flow Rate40(LPM) 60
0 50 100 150 200
20
2.5
30 • Clean Fuel
750 &250
40
Lubricant Solutions
1500
90
cSt
250
cSt 90 cSt
60 1.2
petroind.com
cSt cSt cSt 2.5
cSt
15
2.0 30
2.0
)
)
Flow Rate (LPM) Flow Rate (LPM)
0 20 40 60 80 100 120 0 50 100 150 200
50 40
3.2 6000
cSt 2.5
2.8 3000 1500 750 500
40
0.8 10
0 0 0 0.0
0 5 10 15 20 25 30 35 0 10 20 30 40 50 60
LUBRICANT FILTERS
Flow Rate (GPM)
Flow Rate (GPM)
DBB5333 - Compact
DBB8665 - Light Oil FuelFilter
Filter DBB8664
DBB0248 - Heavy
- Water Oil FilterFilter
Absorbing
P565185
Flow -Rate
Rate
Flow
8(LPM)
Micron
(LPM)
hP Flow
FlowRate
Rate(LPM)
(LPM)
P565183 - 14 Micron hP
0 0 20 50 40 60
100 80 150 100 120
200 00 50
50 100
100 150
150 200
200
Flow Rate (LPM) Flow Rate (LPM)
50 40 4040
0
3000 10 20 30 40 50 60 6000 0 10 20 30 40 50 6
3.2 1500
40 cSt 2.5 cSt
cSt 40 2.5
5000 3000
1500 750
1500 750 500 500 250 5000 3000 1500 750 2.5 500
cSt cSt
cSt cSt
cSt cSt cSt cSt cSt 2.8
2.5 3000
750 1500 250750
cSt 150
cSt 500cSt cSt cSt
40 cSt cStcSt cSt
200 cSt cSt cSt
30 3030
cSt 2.0 2.0
2.0
2.4
30 30
(BAR)
Pressure Drop (BAR)
2.0
Drop(BAR)
30 2.0
Drop (PSI)
Pressure
1.0
1.2 1.0
1.0
32
10 1.0 cSt
100 0.8 1010
© Donaldson Company, Inc.
Inc.
Inc.
Company, Inc.
10 cSt 0.5 0.5
0.5 100
Company,
10 10
Donaldson Company,
3 cSt
Inc.
cSt 32 0.4
0.5 3 cSt
Company,
cSt (Diesel)
© Donaldson
© Donaldson
0 0 0 0.0 00 0.0
0.0 32cSt
0 0 5 10 10 20 15 30 20 4025 30
50 3560 00 10
10 20
20 30
30 40
40 50
50 60
60
© Donaldson
0.0 0
Flow Rate 8(GPM)
©
0 4 Flow Rate (GPM) 12 16 0 Rate
Flow
Flow Rate(GPM)
(GPM) 4 8 12 1
32
(BAR)
Pressure Drop (PSI)
2.0 30 2.0
Pressure Drop (PSI)
(BAR)
Drop (PSI)
(BAR)
20
Drop
Pressure Drop (PSI)
(PSI)
20 250
20
Drop
Drop
DropDrop
1.5 cSt90 1.5 cSt
1.5 cSt 1.5
Pressure
20 20 20 20
Pressure
Drop
1.0 20 1.0
Pressure
150
Pressure
Pressure
Pressure
100 100
cSt
32 cSt
Pressure
cSt cSt
Pressure
10 1.0 10 1.0
1.0 100 1.0
Inc.
Inc.
0.5 32
3cSt 0.5
Company,
cSt
Company,
10 10 10 10 cSt
3 cSt 10 (Diesel)
Inc.
Inc.
© Donaldson Company, Inc.
32
Inc.
32
(Diesel) 0.5 0.5
Company,
cSt 0.5
Company,
cSt 0.5
Company,
© Donaldson
© Donaldson
0 0.0 0 0.0 32
3 cSt cSt
0 10 20 30 40 50 60 0 10 20 30 40 50 (Diesel)60
© Donaldson
Donaldson
©©Donaldson
0 0 0.0
0.0 0 0.0
Flow Rate 0 0.0
0 4 8 (GPM) 12 16 0 4 Flow
0 Rate
8 (GPM) 4 12 8 16 12 1
0 10 20 30 40 50 60 0 10 20 30 40 50 60
Flow Rate (GPM) Flow Flow Rate (GPM)
Flow Rate (GPM) Flow Rate (GPM)
Rate (GPM)
30
Drop(BAR)
30 30 2.0
(PSI)
0.8
2.0 2.0
(BAR)
(PSI)(PSI)
30
3
10 0.20
Pressure Drop (BAR)
2.0 32
(BAR)
Drop
Drop
Pressure Drop (PSI)
P565184
Drop (BAR)
cSt
Drop
DropDrop
(PSI)
1.5
Pressure
Pressure
Pressure
Drop
20
250 0.15 20
Pressure
Pressure
Drop
2 32 cSt 20
100
cSt 1.5
0.4 cSt
cSt
20
Pressure
5
Pressure
1.0
Pressure
Pressure
Inc.
1.0
0.10 1.0
Company,
3 cSt
10 1 3 cSt 32 cSt 1.0 10
10
(Diesel)
Inc.
Inc.
© Donaldson Company, Inc.
(Diesel) 0.05 32
Inc.
10 0 cSt
3 cSt 0.5
Company,
0 cSt
Inc.
0 (Diesel)
© Donaldson
© Donaldson
0 0.0
© Donaldson
0 0 4 Flow Rate
8 (GPM) 12 32cSt 160.0 0 0 4 8 12 16 0.0
0 10 20 30 40 50 60
© Donaldson
0 0.0 0 10 20 30 40 50 60
Flow Rate (GPM) Flow Rate (GPM)
0 4 8
Flow Rate (GPM) 12 16 Flow Rate (GPM)
Flow Rate (GPM)
hP Filters @ 32 cSt*
DBB7733 - Compact Winter Fuel Filter
2 Micron hP
Flow Rate (LPM) 0 10 20
Flow Rate (LPM)
30 40 50 60
0 20 40 60 5
Flow Rate (LPM)
20
0 10 20 30 40 50 60
250 P565183
31
0.30
petroind.com
40
5000 3000
cSt
1500
90 cSt
750 1.2 4 Clean Fuel & Lubricant Solutions •
cSt cSt cSt cSt 2.5
P565185 0.25
rop (BAR)
15 500
rop (PSI)
cSt
30 3 0.20
AR)
2.0
PSI)
P565184
R)
0.8
I)
PETRO Contact Information
AFRICA CANADA
South Africa Alberta
Factory 1 - 16 Bentonite Street Bay A, 233175 Range Road 283
Alrode, Alberton, Johannesburg Rocky View, AB T1X 0J9
South Africa PO Box 75148
P: +27 (0)11 864 7758 Calgary Alberta T3H 3M1 Canada
F: +27 (0) 11 864 1649 P: +1 403 998 7190
E: sales@petroindustrial.co.za TOLL FREE: 1855 44 PETRO
F: +1 403 770 8065
AUSTRALIA E: sales@petroind.ca
Eastern Australia
Factory 2, 106 Potassium Street UAE
PO Box 407 Dubai
Narangba QLD 4504 Office LB17330, Lobby Building 17
P: 07 3204 9558 Jebel Ali Free Zone
F: 07 3293 4852 PO Box 18602
E: sales@petroindustrial.com.au Dubai, United Arab Emirates
P: +971 488 76688
Western Australia F: +971 488 76932
2 Competition Way E: salesuae@petroind.com
Wangara WA 6065
P: 08 6305 0855
F: 08 6305 0319
E: saleswa@petroindustrial.com.au
PETRO
petroind.com