Beruflich Dokumente
Kultur Dokumente
I
f o r
s u b s t i t u t e
n o
´
TRE O
®
i s
architectural
d i g i ta l l i g h t i n g
T
The significance of the TRE'O ® family of performance architectural digital lighting is
based upon technology and long term reliability: the convergence of science, design
and sustainability. Diminutive extr uded and cast aluminum designs destined for interior
or exterior applications are married with easily replaceable digital lighting platforms to
create aes thetic architectural luminaires that offer many features of classical lamp and
fixture products.
Imagine multiple optical and white light temperatures, dimming, static color and RGB,
numerous adjustable mountings and the Insight standard palette of finishes offered with
the highest lumen packages currently available in a linear configuration. All provided
with a 2 year warranty.
TRE'O ® represents the most complete selection of digital LED linear lighting: what the
architectural design community had in mind!
2
´
TRE O
®
3
THE INSIGHT LED TECHNOLOGY
There are many choices available to the manufacturer for the control of LED’s used in
illumination. Suffice to say, that whatever the application or industry, the enemy of an
LED is heat, condensation and electrostatic discharge (ESD). Continued exposure to
all or any of these environments impacts longevity and performance. The manner in
which heat is dissipated, the LED's are protected from condensation and the chosen
manufacturing process, is what differentiates serious manufacturers from one another.
Imbedded science, sealed electronics and a controlled manufacturing process are the
benchmarks of Insight's digital family of products.
Insight LED lighting fixtures, whether architectural, Illusions or SmartEdge pro ducts
employ a combination of sciences that create an environment of low temperature and
sealed electronics. Insight’s design approach equates to longer life, consistent fixture
to fixture color performance, lighting uniformity and product integrity that lasts.
Insight provides with its sustainable designs a 2 year warranty on all LED lighting products!
4
´
TRE O
®
T R E ' O ® p r ovides a wide range of Kelvin temperatures (2900, 3400, 4200, 5500) in white l i g h t ,
f i x t u r e o u t puts of 6, 12 and 15 watts/ft and correspondent lumen ratings (see chart on p a g e s
7 & 9 ) . A choice of 15°, 30°, 60° and 120° distributions, red, green and blue and RGB / D M X
( 2 c o n t r o l l ers) are available. On board integral drivers are standard with a choice of 4 re m o t e
damp UL power supplies (96W, 150W, 300W, 600W) and 1 wet (96W) UL recognized power supply.
P a r a l l e l w i ring for run lengths to 96 feet (see chart on page 15) may be incorporated. A stan d a r d
d i m m i n g module for 0-10 volt DC interface may be specified. Standard interior moun t i n g s
a r e c o v e , surface ceiling/wall, extended off-set, cantilever, pendant, cable and contin u o u s .
S t a n d a r d exterior mountings are surface ceiling/wall, cantilever, pendant and continu o u s .
5
´
TRE O
®
t c s e r i e s
i n t e r i o r
architectural
d i g i ta l l i g h t i n g
6
speci f ications
Luminaire
The TRE'O® TC Series luminaire is constructed of extruded aluminum with
tooled end caps in nominal lengths from 1 to 12 feet. The TRE'O Series is
provided with a selection of mountings that allow for 180 degree rotation and
aiming of the fixture. All painted surfaces are pretreated with a phosphate
wash and powder coated to a 3 mil thickness. U.L. and Canadian Standards
approved for dry locations. Two year limited warranty. Please refer to the Insight
website for the most current specifications.
Lens
TRE'O® is provided with an acrylic snap-in tool-less lens, protecting the sealed
LED platform. 120° clear lens is the default when ordering a TRE'O® TC
product.
Optics
Symmetrical Beam Angles
TRE'O® TC Series are available in four distinct symmetrical distributions. 15°
30°, 60° and 120° beam angles are available.
Electrical
TRE'O® luminaires are pre-wired and sealed for ease of installation and
15° 30° 60° 120° factory authorized maintenance. Insight UL Listed remote power supplies
are provided in 120V AC / 24V DC. TC Series are compatible with UL dry
location approved enclosures for remote placement. All power supplies must
be ordered separately.
Temperature °K
red green blue 24 bit 28/29 32/34 41/42 55/56
24 bit DMX512 protocol 15 W/ft 480 510 540 600
Watts/Foot 12 W/ft 384 408 432 480
6 W/ft 192 204 216 240
Lumens/Foot
7
´
TRE O
®
t e s e r i e s
e x t e r i o r
architectural
d i g i ta l l i g h t i n g
8
speci f ications
Luminaire
The TRE'O® TE Series luminaire is constructed of extruded aluminum sealed
to die cast end caps in nominal lengths from 1 to 12 feet. The TRE'O Series
is provided with a selection of mountings that allow for 180 degree rotation
and aiming of the fixture. All painted surfaces are pretreated with a phosphate
wash and powder coated to a 3 mil thickness. U.L. and Canadian Standards
approved for wet locations. Two year limited warranty. Please refer to the Insight
website for the most current specifications.
Frame /Lens
TRE'O® TE luminaires include a sealed extruded aluminum frame and an
acrylic lens attached to the fixture with captive fasteners. 120° clear lens is the
default when ordering a TRE'O® TE product.
Optics
Symmetrical Beam Angles TRE'O® TE Series are available in four distinct symmetrical distributions. 15°
30°, 60° and 120° beam angles are available.
Electrical
TRE'O® luminaires are pre-wired and sealed for ease of installation and
15° 30° 60° 120° factory authorized maintenance. Insight UL Listed remote power supplies are
provided in 120V A.C./24V D.C. Contact factory for U.L. Listings. TE Series
are compatible with U.L. approved enclosures for remote placement. Contact
factory for U.L. listings. All power supplies must be ordered separately.
Color Range
TRE'O Lumen Output
Temperature °K
red green blue 24 bit 28/29 32/34 41/42 55/56
24 bit DMX512 protocol 15 W/ft 480 510 540 600
Watts/Foot 12 W/ft 384 408 432 480
6 W/ft 192 204 216 240
Lumens/Foot
9
O R D E R I N G I N F O R M A T I O N
TRE'O® - TC SERIES
HIGH PERFORMANCE
INTERIOR LED LIGHTING
FINISH
15 15° Symmetric Distribution
30 30° Symmetric Distribution
60 60° Symmetric Distribution DM Dimming (0-10 Volt Interface)
120 120° Symmetric Distribution DMX DMX Controller
OPTIONS
OPTICS
ORDERING EXAMPLE:
TC12-29K / 30 / CVS / 4' / BL / DM
CVS Cove, Single Fixture
CVM Cove, Continuous Run
SMS Surface, Ceiling/Wall, Single Fixture
SMM Surface, Ceiling/Wall, Continuous Run
EFS Extended Offset, Single Fixture Power Supply Catalog Numbers:
EFM Extended Offset, Continuous Run
EAS Cantilever, Single Fixture RPS-96-24-W (1)-96W Power Supply, 120V A.C. / 24V D.C.
UL Recognized Dry/Damp/Wet Locations
EAM Cantilever, Continuous Run
ACS Cable, Single Fixture
RPS-150-24 (1)-150W Power Supply, 120V A.C. / 24V D.C.*
ACM Cable, Continuous Run RPS-300-24 (1)-300W Power Supply, 120V A.C. / 24V D.C.*
PNS Stem, Single Fixture RPS-600-24 (1)-600W Power Supply, 120V A.C. / 24V D.C.*
PNM Stem, Continuous Run
* Power supply is UL Dry Location and is not plenum rated.
Contact factory for specific mounting details. For Non-IC Plenum Rating add "P" to catalog number
(eg: RPS-150-24-P).
MOUNTING
For continuous runs and power supply locations, please
contact factory.
10
mou N ting in f ormation
TRE'O® - TC SERIES
. NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 12¼ 24¼ 36¼ 48¼ 60¼ 72¼ 84¼ 96¼ 144¼
OAL
mounting & dimension details
Surface, Wall / Ceiling - SMS & SMM
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 19⅛ 31⅛ 43⅛ 55⅛ 67⅛ 79⅛ 91⅛ 103⅛ 152⅛
mounting & dimension details OAL
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 12¼ 24¼ 36¼ 48¼ 60¼ 72¼ 84¼ 96¼ 144¼
mounting & dimension details OAL
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 19⅛ 31⅛ 43⅛ 55⅛ 67⅛ 79⅛ 91⅛ 103⅛ 152⅛
OAL
mounting & dimension details
Cable & Stem - ACS, ACM & PNS, PNM
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
DIM 'A' 19⅛ 31⅛ 43⅛ 55⅛ 67⅛ 79⅛ 91⅛ 103⅛ 152⅛
OAL
TRE'O® - TE SERIES
HIGH PERFORMANCE
EXTERIOR LED LIGHTING
OPTICS OPTIONS
ORDERING EXAMPLE:
TE12-29K / 30 / SMS / 4' / TBL / DM
SMS Surface - Wall / Ceiling, Single Fixture
SMM Surface - Wall / Ceiling, Continuous Run
EAS Cantilever, Single Fixture
EAM Cantilever, Continuous Run Power Supply Catalog Numbers:
EAS90 90° Cantilever, Single Fixture
EAM90 90° Cantilever, Continuous Run RPS-96-24-W (1)-96W Power Supply, 120V A.C. / 24V D.C.
PNS Stem, Single Fixture UL Recognized Dry/Damp/Wet Locations
PNM Stem, Continuous Run
CDS Conduit, Single Fixture (Conduit by others) RPS-150-24 (1)-150W Power Supply, 120V A.C. / 24V D.C.*
CDM Conduit, Continuous Run (Conduit by others) RPS-300-24 (1)-300W Power Supply, 120V A.C. / 24V D.C.*
RPS-600-24 (1)-600W Power Supply, 120V A.C. / 24V D.C.*
Contact factory for specific mounting details. * Power supply is UL Dry Location and is not plenum rated.
For Non-IC Plenum Rating add "P" to catalog number
(eg: RPS-150-24-P).
MOUNTING
For continuous runs and power supply locations, please
contact factory.
12
mou N ting in f ormation
TRE'O® - TE SERIES
NOMINAL
. FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 13⅝ 25⅝ 37⅝ 49⅝ 61⅝ 73⅝ 85⅝ 97⅝ 145⅝
OAL
mounting & dimension details
Cantilever - EAS & EAM
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 13⅝ 25⅝ 37⅝ 49⅝ 61⅝ 73⅝ 85⅝ 97⅝ 145⅝
OAL
mounting & dimension details
90° Cantilever - EAS90 & EAM90
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 13⅝ 25⅝ 37⅝ 49⅝ 61⅝ 73⅝ 85⅝ 97⅝ 145⅝
mounting & dimension details OAL
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 13⅝ 25⅝ 37⅝ 49⅝ 61⅝ 73⅝ 85⅝ 97⅝ 145⅝
OAL
mounting & dimension details
Conduit - CDS & CDM
Conduit by others
NOMINAL
FIXTURE
LENGTH 1' 2' 3' 4' 5' 6' 7' 8' 12'
Contact factory for continuous run DIM 'A' 13⅝ 25⅝ 37⅝ 49⅝ 61⅝ 73⅝ 85⅝ 97⅝ 145⅝
mounting & dimension details OAL
13
P O W E R S U P P L Y I N F O R M A T I O N
Insight Lighting
UL Dry Location
150W, 300W and 600W Power Supplies
Catalog#:
RPS-150-24
RPS-300-24
RPS-600-24
Insight Lighting
UL Recognized Dry/Damp/Wet Locations
96 Watt Power Supply
Catalog#: RPS-96-24-W
14
wiring I N F O R M A T I O N
Wiring Diagram
600W
Power Supply
300W
Power Supply
150W
Power Supply
96W
Power Supply
15
INSIGHT LIGHTING
Tel: 505.345.0888
www.insightlighting.com
Insight Lighting reserves the right to change specifications without notice due to product improvements.
TRE'O ® - 04-17-07