Toolmaker On/Off to run Toolmaker. . Click Wizard tab > Modify Molds panel > Power Feature Trimming. The Power Feature Trimming page is displayed. . Select Manual settings if you want to specify the parameters to be used for trimming the pins. The Parameters area is displayed a. In the Trim to list, choose an option to specify the plate: Core plate (available when core pin, ejector sleeve or ejector pin components are selected) Cavity plate (available when core pin or return pin components are selected) Selected component Selected solid / surfaces b. In the Face list, choose the face of the plate to trim: Near Far If you select components with different functions (for example, an ejector pin and a return pin), the Trim to drop-down list contains all options (Core plate, Cavity plate, Selected plate, Selected solid /surfaces). When you click Trim, a dialog asks you to confirm you want to apply trimming to all selected pins. c. Click Reverse trimming direction if you want to change the trimming direction for selected components in the model. The trimming direction for individual selected components is indicated by an arrow.
You can change the trim
direction for a component by clicking the arrow. . Click Trim to apply the changes when you generate the Power Feature. Note: To undo trimming operations,