Beruflich Dokumente
Kultur Dokumente
Function
The power supply modules PS 407 10A (standard) and PS 407 10A R
(redundancy-capable, see Section 3.2) are designed for connection to an AC line
voltage of 85 to 264 V or DC line voltage of 88 to 300 V and supply 5 VDC/10 A
and 24 VDC/1 A on the secondary side.
Controls and Displays of the PS 407 10A and thge PS 407 10A R
• Fixing screw
PS 407 10A
1 X 2
2
3 4
407-0KR00-0AA0
INTF
BAF
BATTF
BATTF • LEDs INTF,
5 VDC BAF, BATT1F, BATT2F,
24 VDC
5 VDC, 24 VDC
+ + Under cover
• Battery compartment
– –
BATT. INDIC.
2 BATT
OFF
• Switches BATT. INDIC.
1 BATT
2 BATT, OFF, 1 BATT
• Fixing screw
Figure 3-4 Controls and Displays of the PS 407 10A and PS 407 10A R
Power Connection
In contrast to the instructions on installing a power supply module described in the
“S7-400, M7-400 Programmable Controllers, Hardware and Installation” manual,
an AC connector is used for connecting the PS 407 10A and the PS 407 10A R to
both an AC and a DC supply.