Beruflich Dokumente
Kultur Dokumente
for 789, 793, 795 and 797 Large Mining Trucks (all models)
The Cat® Ball Stud Breaker Group is an industry-leading tool designed for safer and faster removal of the steering system ball studs and pin cylinders.
Simple and safe to operate, this ball stud breaker will separate the joint in seconds while allowing the operator to remain at a safe distance from the
extraction point. The tool is designed to work on shop floors with slopes up to 5 degrees.
The Ball Stud Breaker tool comes
equipped with a custom breaker platform,
2 work tools, 4 extensions, 3 adapters
and a safety guard configurable to all
listed models.
Optional hydraulic power unit is available
to allow for optimum hydraulic flow and
pressure.
• Load-lock mechanism provides positive locking of • 162 bar (2,350 psi), 32.2 lpm (8.5 gpm) max flow rate
upper platform with hydraulic cylinder disengaged • Supply and return hydraulic hose
• Spring-loaded wheels collapse to allow lower plate • Remote pendant operation
to rest solidly on ground (when load is applied) • Custom-designed mobile cart with forklift
• Work tool, extensions, adapter configurations accom- provision for transport and storage
modate varying under-chassis heights of listed models • 75.7 L (20 gal) Cat® HYDOTM Advanced 10 or iSO46
• Forklift provision for transport and storage Hydraulic Oil
• Robust tool chest for storing work tools,
extensions and adapters
• Interchangeable orifice kit for use with optional Cat
50hz hydraulic power unit
Safety & Regulations
• Globally compliant and CE certified
• Safety guard encloses work tools, extensions and adapters
• Receiving provisions capture impacted surfaces of work tools, extensions and adapters
• Optional hydraulic power unit allows for remote hammer group operation
Hydraulics
524-5356 Quick Disconnect Kit - 1/2 and 3/4 in
360-6957 Lift Cylinder
524-5378 Lift Cylinder Hose
524-5331 Hand Pump
524-9168 Hand Pump Service Kit
524-5379 Hammer
Additional Parts
524-5377 Push/Pull Tool Handle
524-5365 Locking Ring with Handle Assembly
524-5366 Hammer Group Swivel Caster
524-5367 Hammer Group Rigid Caster
524-5375 Guard
524-5381 50 Hz Orifice and Dowty Washer Kit
524-5382 60 Hz Orifice and Dowty Washer Kit
524-5380 Tool Chest
524-5383 Tool Chest-Swivel Caster
524-5384 Tool Chest-Rigid Caster
DEALER SERVICE
TOOLS SUPPORT
COVERAGE
John Woiwode
Marketing Consultant
Woiwode_John_L@cat.com
309-636-1673