Beruflich Dokumente
Kultur Dokumente
Página 1 de 2
Shutdown SIS
Previous Screen
Systems Operation
140M and 160M Motor Graders Hydraulic and Steering System
Media Number -RENR8469-08 Publication Date -01/11/2009 Date Updated -30/11/2009
i03772575
Illustration 1 g01334167
(2) Pistons
(4) Barrel
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 25/08/2010
140M Motor Grader - All Wheel Drive D9G00001-UP (MACHINE) POWERED B... Página 2 de 2
(10) Slipper
(11) Swashplate
The hydraulic pump has nine pistons (2) . When drive shaft (1) turns, barrel (4) , slippers (10) and retraction
plate (9) turn. The piston ends connect to the slippers. Swashplate (11) does not turn. There is a bearing journal
on each side of the swashplate. The two bearing journals are inside bearings which allow movement of the
swashplate. Oil flow through the passages in the pistons lubricates the internal components of the pump.
When swashplate (11) is at the maximum angle and drive shaft (1) is turning, pistons (2) are moved in and out
of barrel (4) . As the pistons move out of the barrel, the pistons create a vacuum at inlet opening (5) . The
pressure in the hydraulic tank pushes the oil into the inlet opening. The oil passes through the inlet opening and
into the piston bore in the barrel. As the barrel continues to turn, the pistons are pushed into the barrel as the
slippers rotate up the angle of swashplate (11) . The pistons push the oil from the piston bore through pump
outlet opening (6) and into the combination valve.
When the engine is operating, the pump will produce flow in order to satisfy the following conditions:
Copyright 1993 - 2010 Caterpillar Inc. Wed Aug 25 12:03:49 EST 2010
All Rights Reserved.
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 25/08/2010