Beruflich Dokumente
Kultur Dokumente
These fittings are suitable for interconnecting piping, valves and other components in both wet and dry automatic sprinkler systems.
Installation should be according to applicable sprinkler system fabrication rules. These rules limit the minimum size of sprinkler piping
to 1 in., nominal. FM Approved pipe fittings of smaller sizes are intended for use as valve trim, gauge connections, and for other
peripheral service. The water flow path of the sprinkler system cannot be designed using smaller sizes than 1 in., nominal. Unless
otherwise noted in the listing, these fittings have 175 psi (1205 kPa) rated working pressure.
Threaded connections on fittings can be made to FM Approved threadable thinwall pipe or to Schedule 40 pipe. Refer to the "Steel
Pipe" listings for a summary of the various types of FM Approved steel pipe suitable for threading or grooving."
The fittings manufacturer's installation instructions must be observed in all cases. When connections are made to FM Approved pipe,
the pipe manufacturer's installation instructions must also be followed.
Unless otherwise stated below, the maximum ambient temperature to which these fittings should be subjected is 225°F (107°C).
Max Working
Product Fitting Nominal Pipe
Remarks Pressure,
Designation Description Size, in.
psi (kPa)
Remarks:
a. For use on Schedule 10 or heavier pipe. NPT internal threaded outlet.
Max Working
Product Fitting Nominal Pipe
Remarks Pressure,
Designation Description Size, in.
psi (kPa)
2 x 1-1/4, 1-1/2 300
c, l
3 x 1-1/4, 1-1/2, 2 (2070)
2 x 1-1/4, 1-1/2
3 x 1-1/4, 1-1/2, 2 300
c, d, m
4 x 1-1/4, 1-1/2, 2, 2-1/2, 3, 76.1 (2070)
mm
2 x 1-1/4, 1-1/2
3 x 1-1/4, 1-1/2, 2
4 x 1-1/4, 1-1/2, 2, 2-1/2, 3, 76.1
Snap-Tee mm 300
a, b, c, n
Style 15 Branch Outlet 5 x 1-1/4, 1-1/2, 2, 2-1/2, 3, 76.1 (2070)
(Grooved) mm
6 x 1-1/4, 1-1/2, 2-1/2, 3, 4, 76.1
mm
300
8 x 2, 2-1/2, 3, 4, 76.1 mm a, b, c
(2070)
76.1 mm x 1-1/2
139.7 mm x 1-1/4, 1-1/2, 2, 2-1/2,
300
3, 76.1 mm c, k
(2070)
165.1 mm x 1-1/4, 1-1/2, 2, 2-1/2,
3, 4, 76.1 mm
Max Working
Product Fitting Nominal Pipe
Remarks Pressure,
Designation Description Size, in.
psi (kPa)
2 x 1/2, 3/4, 1, 1-1/4, 1-1/2
300
2-1/2 x 1/2, 3/4, 1, 1-1/4, 1-1/2 c, l, p
(2070)
3 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2
300
2 x 1/2, 3/4, 1, 1-1/4, 1-1/2 c, g, p
(2070)
Remarks:
a. Min schedule rolled groove pipe to be joined: 6 in. or smaller - Schedule 10S; 8 in. or larger - 0.188 in. (5 mm) wall.
b. Min schedule cut groove pipe to be joined: 6 in. or smaller - Schedule 40; 8 in. or larger - Schedule 30.
c. With EPDM gasket.
d. Allied "Dyna-Flow"
g. Bull Moose "EDDY-Lite"
k. British Standard BS 1387 Pipe, Med. and Heavy.
l. Allied "XL"
m. Allied "Super-Flo"
o. Northwest "EZ Flow"
p. Central Sprinkler "TL"
Pipe Fittings
Pipe Fittings
Max Working
Product Fitting Nominal Pipe
Pressure, psi
Designation Description Size, in. Remarks
(kPa)
175
Inter-Fit 100 14, 16, 18
(1205)
300
76, 139.7, 165 mm
(2070)
175
Inter-Fit 101 10, 12, 14, 16, 18
(1205)
300
76, 139.7, 165 mm
(2070)
175
14, 16, 18
(1205)
1-1/2 × 1-1/2 × 2
2 × 2 × 2-1/2, 3, 4
Bull Head Tee 300
111 2-1/2 × 2-1/2 × 3, 4
Grooved (2070)
3×3×4
4×4×6
2 × 2 × 1, 1-1/4, 1-1/2
3 × 3 × 2, 2-1/2
4 × 4 × 1-1/2, 2, 2-1/2,
3, 76 mm
5 × 5 × 3, 4
139 mm × 3, 4
165 mm × 2, 2-1/2, 3,
Reducing Tee 4, 5, 76 mm, 139 mm 300
115 6 × 6 × 2, 2-1/2, 3, 4,
Grooved (2070)
5, 139 mm
8 × 8 × 2, 2-1/2, 3, 4,
5, 6, 76 mm, 139 mm,
165 mm
10 × 10 × 3, 4, 5, 5, 6,
8, 165 mm
12 × 12 × 4, 5, 6, 8,
10, 165 mm
175
8
(1205)
2 × 1-1/4, 1-1/2
2-1/2 × 2
3 × 1-1/4, 2, 2-1/2, 76
mm
76 mm × 1-1/4, 1-1/2, 2
4 × 2-1/2, 3, 4, 76 mm
5 × 2, 2-1/2, 3, 4, 76
mm
139 mm × 2, 2-1/2, 3,
Concentric Reducer 4, 76 mm 300
140
Grooved 6 × 2, 2-1/2, 3, 4, 5, (2070)
76, 139 mm
165 mm × 2, 3, 4, 76,
139 mm
8 × 2-1/2, 3, 4, 5, 6,
76, 139 mm
10 × 3, 4, 5, 6, 8, 139
mm, 165 mm
2 × 1, 1-1/4, 1-1/2
2-1/2 × 1, 1-1/4, 1-1/2,
2
76 mm × 1, 1-1/4,
1-1/2, 2
Concentric Reducer 300
140 TM 3 × 1, 1-1/4, 1-1/2, 2,
Threaded (2070)
2-1/2
4 × 1, 1-1/4, 1-1/2, 2,
2-1/2, 3
6 × 1, 1-1/4, 1-1/2, 2,
2-1/2, 3
300
150 10, 12
(2070)
14, 16 175
76 mm, 165 mm (1205)
1, 1-1/4, 1-1/2, 2,
End Cap 300
155 2-1/2, 3, 4, 5, 6, 8
Grooved (2070)
76, 139.7, 165 mm
Adapter 500
190 2, 2-1/2, 3, 4, 5, 6, 8
Flange x Groove (3445)
1/2 × 3/8
3/4 × 3/8, 1/2
Hex Bushing 1 × 1/2, 3/4 300
70
Threaded 1-1/4 × 1/2, 3/4, 1 (2070)
1-1/2 × 1/2, 3/4, 1,
1-1/4
3/4 × 1/2
1-1/4 × 3/4, 1
Reducing Socket 1-1/2 × 3/4, 1, 1-1/4 300
74
Threaded 2 × 3/4, 1, 1-1/4, 1-1/2 (2070)
2-1/2 × 1/2, 1, 1-1/4,
1-1/2, 2
Inter-Fit 10,11,12
Max Working
Product Nominal Pipe
Pipe Ends Remarks Pressure,
Designation Size, in.
psi (kPa)
1-1/4, 1-1/2, 2, 2-1/2, Cut Groove 500
a, b, c
3, 4 Rolled Groove (3445)
175
1, 1-1/4, 1-1/2, 2 Rolled Groove c, n
(1205)
a. Min schedule cut groove pipe to be joined: 6 in. or smaller - Schedule 40; 8 in. or larger - Schedule 30.
b. Min schedule rolled groove pipe to be joined: 6 in. or smaller - Schedule 10S; 8 in. or larger - 0.188 in. (5 mm) wall.
c. With EPDM gasket and flush-seal gasket.
d. For use with Northwest "EZ-Flow"
e. Allied "Dyna-Flow"
h. Bull Moose "EDDY-Lite"
i. British Standard BS 1387 Pipe, Med. and Heavy.
j. Allied "XL"
k. Allied "Super-Flo"
m. Central Sprinkler "TL" pipe.
n. Wheatland Schedule 5 and IDOD Gal-5.
o. IDOD Gal-7.
p. Tex-Tube Tex-Flow
r. Western International Fire-Thread and Fire-Flow
s. Northwest EZ-Flow
t. Welded Tube - Berkeley, LLC Steady-Flow
Style 25
Max Working
Product Nominal Pipe
Pipe Ends Remarks Pressure,
Designation Size, in.
psi (kPa)
2 x 1, 1-1/4, 1-1/2
2-1/2 x 2
Cut Groove a, b, c, h, 300
3 x 2, 2-1/2, 76 mm
Rolled Groove p, r, s, t (2070)
4 x 2, 2-1/2, 3, 76 mm
6x4
2 x 1-1/2
Style 25 2-1/2 x 2 Cut Groove 300
c, e, k, j, m
3 x 2, 2-1/2, 76 mm Rolled Groove (2070)
4 x 2, 2-1/2, 3, 76 mm
a. Min schedule cut groove pipe to be joined: 6 in. or smaller - Schedule 40; 8 in. or larger - Schedule 30.
b. Min schedule rolled groove pipe to be joined: 6 in. or smaller - Schedule 10S; 8 in. or larger - 0.188 in. (5 mm) wall.
c. With EPDM gasket.
d. For use with Northwest "EZ-Flow"
e. Allied "Dyna-Flow"
h. Bull Moose "EDDY-Lite"
i. British Standard BS 1387 Pipe, Med. and Heavy.
j. Allied "XL"
k. Allied "Super-Flo"
m. Central Sprinkler "TL" pipe
o. IDOD Gal-7
p. Tex-Tube Tex-flow
r. Western International Fire-Thread and Fire-Flow
s. Northwest EZ-Flow
t. Welded Tube - Berkeley, LLC Steady-Flow
Style 5*
Max Working
Product Nominal Pipe
Pipe Ends Remarks Pressure,
Designation Size, in.
psi (kPa)
1, 1-1/4, 1-1/2, 2,
Cut Groove 300
Style 5* 2-1/2, 3, 4, 5, 6, 8, 10, a, b, c, s
Rolled Groove (2070)
12
*For installation where greater rigidity of pipe system is required. Not for use as flexible joints in locations subject to earthquake.
a. Min schedule cut groove pipe to be joined: 6 in. or smaller - Schedule 40; 8 in. or larger - Schedule 30.
b. Min schedule rolled groove pipe to be joined: 6 in. or smaller - Schedule 10S; 8 in. or larger - 0.188 in. (5 mm) wall.
c. With EPDM gasket, and flush-seal gasket.
d. Allied "Dyna-Flow"
g. Bull Moose "EDDY-Lite"
l. Allied "XL"
m. Allied "Super-Flo"
n. BS 1387 pipe, Med. or Heavy.
o. IDOD Gal-7
p. Tex-Tube Tex-flow
r. Western International Fire-Thread and Fire-Flow
s. Northwest EZ-Flow
t. Welded Tube - Berkeley, LLC Steady-Flow
u. Wheatland Sch. 5 and IDOD Gal-5
Style 14
Max Working
Product Nominal Pipe
Pipe Ends Remarks Pressure,
Designation Size, in.
psi (kPa)
Cut Groove 300
2, 2-1/2, 3, 4, 5, 6, 8 a, b, c
Rolled Groove (2070)
a. Min schedule pipe to be joined: 6 in. or smaller - Schedule 40; 8 in. or larger - Schedule 30.
b. Min schedule pipe to be joined: 6 in. or smaller - Schedule 10S; 8 in. or larger - 0.188 in. (5 mm) wall.
c. With EPDM gasket. d. BS 1387 pipe, Med. and Heavy.
VIZA.EX4259
Fittings, Grooved and Plain End
Page Bottom
The following fittings are inte nde d for use with Inte rfit Liste d rubbe r gask e te d fittings.
Grooved
Rated Pressure
Model Type Size In. (psig)
3, 3-1/2, 4, 5, 6, 8
Style 100 90 de gre e e lbow 3(O D), 5.5(O D), 6.5(O D), 14, 16 300
3, 3-1/2, 4, 5, 6, 8
Style 101 45 de gre e e lbow 3(O D), 5.5(O D), 6.5(O D), 14, 16 300
3, 3-1/2, 4, 5, 6, 8
Style 110 Te e 3(O D), 5.5(O D), 6.5(O D), 14, 16 300
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZA.EX4259&ccnshorttitle=Fittings,+Grooved+and+Plain+End&objid=1074306075&cfgid=1073741824&version=versionless&parent_id=1073… 1/6
3/30/2014 VIZA.EX4259 - Fittings, Grooved and Plain End
Style 111 Bullhe ad Te e 1-1/2x 1-1/2x 2, 2x 2x 2-1/2 300
2x 2x 3, 2-1/2x 2-1/2x 3
2x 2x 4, 2-1/2x 2-1/2x 4
3x 3x 4, 4x 4x 6
4x 4x 2-1/2, 4x 4x 3, 5x 5x 3,
5x 5x 4, 6x 6x 2, 6x 6x 2-1/2,
6x 6x 3, 6x 6x 4, 8x 8x 2,
8x 8x 3, 8x 8x 4, 8x 8x 6
8x 8x 2-1/2, 2x 2x 1, 2x 2x 1-1/4,
3X3X3O D, 4X4X3O D,
8X8X5-1/2O D, 10X10X8,
10X10X6, 10X10X5,
10X10X4, 10X10X3,
8X8X6-1/2,
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZA.EX4259&ccnshorttitle=Fittings,+Grooved+and+Plain+End&objid=1074306075&cfgid=1073741824&version=versionless&parent_id=1073… 2/6
3/30/2014 VIZA.EX4259 - Fittings, Grooved and Plain End
12X12X4, 12X12X5,
12X12X6, 12X12X8
R e duce rs 4x 2, 4x 2-1/2, 4x 3,
5x 3, 5x 4, 6x 2, 6x 2-1/2,
6x 3, 6x 4, 8x 2-1/2, 8x 3,
8x 4, 8x 6
3, 3-1/2, 4, 5, 6, 8
Adaptor
3, 4, 5, 6, 8
Style 140 C once ntric R e duce rs 2x 2-1/2, 3(O D)x 2, 3x 1-1/4, 300
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZA.EX4259&ccnshorttitle=Fittings,+Grooved+and+Plain+End&objid=1074306075&cfgid=1073741824&version=versionless&parent_id=1073… 3/6
3/30/2014 VIZA.EX4259 - Fittings, Grooved and Plain End
6.5(O D)x 3(O D), 8x 3(O D), 8x 6.5(O D)
10X3, 10X5-1/2,
10X5, 10X6-1/2O D
3, 4, 5, 6, 8
3, 4, 5, 6, 8
3, 4, 5, 6, 8
Drain Elbow
Drain Elbow
Te e
Te e
Te e
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZA.EX4259&ccnshorttitle=Fittings,+Grooved+and+Plain+End&objid=1074306075&cfgid=1073741824&version=versionless&parent_id=1073… 4/6
3/30/2014 VIZA.EX4259 - Fittings, Grooved and Plain End
103 11-1/4 De gre e Elbow 5, 6-1/2 (O D), 6, 8 300
3 x 3 x 1, 1-1/4, 1-1/2, 2
4 x 4 x 1, 1-1/4, 1-1/2, 2
3 x 3 x 1-1/2, 2, 2-1/2
4 x 4 x 1-1/2, 2, 2-1/2, 3
4 x 4 x 3 (O D)
6 x 6 x 2, 2-1/2, 3, 4
4 x 1, 1-1/2, 1-1/2, 2
2-1/2 x 2
3 x 1-1/4, 2, 2-1/2
4 x 2, 2-1/2, 3
6 x 2, 2-1/2, 3, 4, 5
8 x 3, 4, 5, 6
12 x 4, 6, 8, 10
14 x 6, 8, 10, 12
3 x 1-1/2, 2
4 x 1-1/2, 2
© 2014 UL LLC
W he n the UL Le af Mark is on the product, or whe n the word "Environm e nt" is include d in the UL Mark , ple ase se arch the UL Environm e nt database for additional inform ation
re garding this product's ce rtification.
The appe arance of a com pany's nam e or product in this database doe s not in itse lf assure that products so ide ntifie d have be e n m anufacture d unde r UL's Follow-Up Se rvice .
O nly those products be aring the UL Mark should be conside re d to be C e rtifie d and cove re d unde r UL's Follow-Up Se rvice . Always look for the Mark on the product.
UL pe rm its the re production of the m ate rial containe d in the O nline C e rtification Dire ctory subje ct to the following conditions: 1. The Guide Inform ation, Asse m blie s,
C onstructions, De signs, Syste m s, and/or C e rtifications (file s) m ust be pre se nte d in the ir e ntire ty and in a non-m isle ading m anne r, without any m anipulation of the data (or
drawings). 2. The state m e nt "R e printe d from the O nline C e rtifications Dire ctory with pe rm ission from UL" m ust appe ar adjace nt to the e x tracte d m ate rial. In addition, the
re printe d m ate rial m ust include a copyright notice in the following form at: "© 2014 UL LLC ".
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZA.EX4259&ccnshorttitle=Fittings,+Grooved+and+Plain+End&objid=1074306075&cfgid=1073741824&version=versionless&parent_id=1073… 6/6
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
VIZM.EX4260
Fittings, Rubber Gasketed
Page Bottom
Coupling
Style 5 R olle d, C ut 40 1, 1-1/4, 1-1/2, 2, 2, 2-1/2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 300
Style 5 R olle d EL, G7, FL, SL, TL, XL 1-1/4, 1-1/2, 2 300
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 1/8
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
Style 5 R olle d FLF 1-1/4, 1-1/2, 2, 2-1/2, 3 300
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 2/8
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
Style 10 R olle d BS1387 3.65m m 3 OD 300
Style 11 C ut 40 12 300
Style 12 R olle d XL, SF, DF, SL, TL, G7, EL 1-1/4, 1-1/2, 2 300
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 3/8
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
Style 12 R olle d DF 6 175
Style 25 R olle d 10 2x 1-1/2, 2-1/2x 1-1-2, 2-1/2x 2, 3x 2, 3x 2-1/2, 3O DX2, 4x 2, 4x 2-1/2, 4x 3 300
Style 25 R olle d, C ut 3.25m m , 3.65m m , 4.05m m 2x 1-1/2, 2-1/2x 1-1/2, 2-1/2x 2, 3x 2 300
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 4/8
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
Style 25 C ut 3.65m m 4x 3O D 300
Flange Adapte r
Side Outlets
Rated
Model Outlet Pipe Size (in.) Pressure
type (psig)
Style 13- Thre ade d XL, DF, 5, 10 1-1/4 x 1/2, 3/4, 1; 1-1/2 x 1/2, 3/4, 1; 2 x 1/2, 3/4, 1; 2-1/2 x 1/2, 3/4, 1 300
U
Style 13- Thre ade d EL 1-1/4 x 1/2, 3/4, 1; 1-1/2 x 1/2, 3/4, 1; 2 x 1/2, 3/4, 1 300
U
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 5/8
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
Style 15G Groove d 10, 40 8 x 2, 2-1/2, 3, 4 300
Style 15G Groove d BS1387, 3.65m m 6.5 O D x 1-1/4, 6.5 O D x 1-1/2 300
Style 16 Thre ade d 10, 40 2 x 1/2, 3/4, 1, 1-1/2; 2-1/2 x 1/2, 3/4, 1, 1-1/4, 1-1/2; 3 x 1/2, 3/4, 1, 1-1/4, 1- 300
1/2
Style 16 Thre ade d 10, 40 4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 300
Style 16 Thre ade d XL, SF, DF TL, SL, DF, EL 2 x 1/2, 3/4, 1, 1-1/2 300
Style 16 Thre ade d XL, SF, DF 2-1/2 x 1/2, 3/4, 1, 1-1/4, 1-1/2 300
Style 16 Thre ade d XL, SF, DF 3 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 300
Style 16 Thre ade d SF, DF 4 x 1/2, 3/4, 1-1/4, 1-1/2, 2, 2-1/2, 3 300
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 6/8
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
Style 16 Thre ade d 4.50m m 4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 300
Style 16 Thre ade d 3.65m m 2-1/2 x 1/2, 3/4, 1-1/4, 1-1/2 300
Style 16 Thre ade d 4.50m m 4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 300
Style 16A Thre ade d 40 2-1/2 x 1/2, 3/4, 1, 1-1/2; 3 x 1/2, 3/4, 1, 1-1/2; 4 x /2, 3/4, 1, 1-1/2 300
Mode ls 13U in 1/2 and 3/4 in. nom inal outle t size s are inte nde d for dire ct conne ction to sprink le rs.
Mode ls 13U in the 2, 2-1/2, 3, 4, and 3 O D x 1 in. nom inal outle t size s are inte nde d for dire ct conne ction to sprink le rs.
Mode ls 16, 16A, 15G and 13U in the 1 in. and large r nom inal outle t size s are inte nde d for conne ction to syste m piping.
Style s 5, 10, 11, 12, 15G, and 16 rubbe r gask e te d fittings are suitable for use in dry pipe syste m s for te m pe rature s to -40°F (-40°C ).
Style s 5, 10, 11 and 12 are suitable for use with flush se al gask e ts.
DF re fe rs to Liste d DYNA-FLO W ste e l pipe m anufacture d by Allie d Tube & C onduit C orp
DT or C T re fe rs to Liste d DYNA-Thre ad and C e ntral Thre ad ste e l pipe m anufacture d by Allie d Tube & C onduit C orp
FLF re fe rs to Liste d Fire -Line Flow ste e l pipe m anufacture d by W e ste rn Inte rnational Fore st Products Inc
FLT re fe rs to Liste d Fire -Line Thre adable ste e l pipe m anufacture d by W e ste rn Inte rnational Fore st Products Inc
SF re fe rs to Liste d Supe r-Flo ste e l pipe m anufacture d by Allie d Tube & C onduit C orp
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 7/8
3/30/2014 VIZM.EX4260 - Fittings, Rubber Gasketed
SL re fe rs to Liste d SL ste e l pipe m anufacture d by W he atland Tube C o
STF re fe rs to Liste d Ste ady Flow ste e l pipe m anufacture d by AMS Tube C orp
SPS re fe rs to Liste d SPS Flow ste e l pipe m anufacture d by Yie h Phui Ente rprise C o Ltd
SuXL, Su40 re fe rs to Liste d Supe r XL, Supe r 40 ste e l pipe m anufacture d by Allie d Tube & C onduit C orp
XL or XL-II re fe rs to Liste d XL and XL-II ste e l pipe m anufacture d by Allie d Tube & C onduit C orp
The 3.25, 3.65, 4.05, 4.50, 5.40 m m re fe r to pipe wall thick ne ss as spe cifie d in the British Standard for ste e l tube s, BS1387, BS3601 re spe ctive ly
© 2014 UL LLC
W he n the UL Le af Mark is on the product, or whe n the word "Environm e nt" is include d in the UL Mark , ple ase se arch the UL Environm e nt database for additional inform ation
re garding this product's ce rtification.
The appe arance of a com pany's nam e or product in this database doe s not in itse lf assure that products so ide ntifie d have be e n m anufacture d unde r UL's Follow-Up Se rvice .
O nly those products be aring the UL Mark should be conside re d to be C e rtifie d and cove re d unde r UL's Follow-Up Se rvice . Always look for the Mark on the product.
UL pe rm its the re production of the m ate rial containe d in the O nline C e rtification Dire ctory subje ct to the following conditions: 1. The Guide Inform ation, Asse m blie s,
C onstructions, De signs, Syste m s, and/or C e rtifications (file s) m ust be pre se nte d in the ir e ntire ty and in a non-m isle ading m anne r, without any m anipulation of the data (or
drawings). 2. The state m e nt "R e printe d from the O nline C e rtifications Dire ctory with pe rm ission from UL" m ust appe ar adjace nt to the e x tracte d m ate rial. In addition, the
re printe d m ate rial m ust include a copyright notice in the following form at: "© 2014 UL LLC ".
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VIZM.EX4260&ccnshorttitle=Fittings,+Rubber+Gasketed&objid=1074306177&cfgid=1073741824&version=versionless&parent_id=1073994661… 8/8