Beruflich Dokumente
Kultur Dokumente
General Specifications
Antenna Type Sector
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Dimensions
Width 628 mm | 24.724 in
Electrical Specifications
Operating Frequency Band 1710 – 2690 MHz
Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2170 2300–2500 2500–2690
Gain, dBi 17.3 17.6 18 18.6 18.6
Beamwidth, Horizontal, 68 67 67 62 63
degrees
Beamwidth, Vertical, degrees 6.7 6.4 6.1 5.3 5
Page 1 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 17, 2020
HW4X-6516DS1-VTM
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 16 16 16 19 19
Front-to-Back Ratio at 180°, 31 31 32 32 30
dB
Isolation, Cross Polarization, 30 30 30 30 30
dB
Isolation, Inter-band, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
Material Specifications
Radiator Material Low loss circuit board
Mechanical Specifications
Wind Loading at Velocity, frontal 1,024.0 N @ 150 km/h | 230.2 lbf @ 150 km/h
Wind Loading at Velocity, lateral 120.0 N @ 150 km/h | 27.0 lbf @ 150 km/h
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 17, 2020
HW4X-6516DS1-VTM
Packaging and Weights
Width, packed 718 mm | 28.268 in
Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
Included Products
BSAMNT-3 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top
bracket set and one bottom bracket set.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
Page 3 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 17, 2020