Beruflich Dokumente
Kultur Dokumente
HYDRAULICS
SHUR-LIFT
HYDRAULIC CYLINDERS
AGRICULTURAL INDUSTRIAL
HYDRAULIC CYLINDERS
SHUR-LIFT 3,000
THREADED HEAD UTILITY CYLINDERS ®
2
01 Hydraulics 6/6/06 8:27 AM Page 3
HYDRAULIC CYLINDERS
SHUR-LIFT 3,000 ®
SHUR-LIFT 2,500
SNAP RING UTILITY CYLINDERS
3
01 Hydraulics 6/6/06 8:27 AM Page 4
HYDRAULIC CYLINDERS
SHUR-LIFT 3,000 THREADED
®
HEAD IMPLEMENT CYLINDERS
SHUR-LIFT 2,500
SNAP RING IMPLEMENT CYLINDERS ®
HYDRAULIC CYLINDERS
SHUR-LIFT 3,000 THREADED HEAD ®
SHUR-LIFT 3,000
LOADER CYLINDERS
HYDRAULIC CYLINDERS
LOGSPLITTER CYLINDERS
®
* From receipt and confirmation of order (max. 5 pieces). Not including transit time.
6
01 Hydraulics 6/6/06 8:28 AM Page 7
HYDRAULIC CYLINDERS
CYLINDER PINS
CYLINDER ACCESSORIES
Includes cotter and presto pin.
CLEVIS END Dia. Usable O’all Wt. ITEM PRICE
length length (lbs.)
1/2" 2-3/4" 3-1/2" 0.2 3800449 1.49
3/4" 3-1/4" 4" 0.5 3800450 1.99
1" 2-3/4" 3-1/2" 0.8 3800487 2.99
1" pinhole, 1" 3-3/4" 4-1/2" 1.0 3800451 3.49
1-1/8" between clevis ends. 1" 4-1/4" 5" 1.1 3800452 4.29
FITS 1-1/4" SHAFT 1" 4-3/4" 5-1/2" 1.2 3800453 4.19
1252451 – Wt. 2.9 lbs. . . . . . . . . . . . . . . . . . 2399 1" 5-1/4" 6" 1.3 3800454 4.49
FITS 1-1/2" SHAFT 1" 5-3/4" 6-1/2" 1.4 3800456 5.49
8003212 – Wt. 3.5 lbs. . . . . . . . . . . . . . . . . . 2999 1-1/4" 4-1/4" 5" 1.8 3800443 5.49
1-1/4" 6-1/4" 7" 2.4 3800445 7.49
1-1/4" 7-1/4" 8" 2.8 3800446 7.99
CYLINDERS ENDS
A) CROSS TUBE
Drilled for 3/16" drive-in grease nipple.
Dimensions Wt. ITEM PRICE
A
1" I.D. x 2-1/4" L 0.6 8001456 5.99 B
1" I.D. x 2-3/4" L 0.7 8001457 6.49 B) MALE TANG
1" I.D. x 3-1/4" L 0.9 8001458 6.99 Use two to make a base end clevis.
1" I.D. x 3-3/4" L 1.0 8001460 7.49 Dimensions Wt. ITEM PRICE
1" I.D. x 4-1/4" L 1.2 8001461 7.99 1" I.D. x 3/8" thick 0.4 8001473 8.49
1-1/4" I.D. x 2-3/4" L* 1.5 8001469 9.99 1" I.D. x 1/2" thick 0.7 8001474 8.99
1-1/4" I.D. x 4-3/4" L* 2.5 8001471 11.99 1" I.D. x 3/4" thick 1.0 8001475 9.99
1-1/4" I.D. x 5-3/4" L* 3.1 8001472 12.99 1-1/4" I.D. x 1" thick 1.4 8001476 10.99
* Heavy wall
Princess Auto provides product and/or system options for further investigation by users
having technical expertise. It is important that you analyze all aspects of your application and
review the information concerning the product or system. Due to the variety of operating
conditions and applications for these products or systems, the user, through its own analysis
and testing, is solely responsible for making the final selection of the products and systems
and assuring that all performance, safety and warning requirements of the application
are met.
The products described herein, including without limitation, product features, specifications,
designs, availability and pricing, are subject to change without notice.
7
01 Hydraulics 6/6/06 8:28 AM Page 8
POWER PACKS
HIGH PRESSURE HYDRAULIC Williams pumps are stocked in all stores west of
Winnipeg. Please call 1-800-665-8685
PISTON PUMP for special orders.
A B
• Low pressure, high volume
• Ideal for presses & compactors • Ideal for presses & compactors • Ideal for cattle squeezes
• Intermittent duty cycle • Continuous duty • Continuous duty
Relief Ports Reservoir Duty Wt.
Volt HP GPM Setting (GAL) Cycle (lbs.) ITEM PRICE
A 208-230 2 1.29 3,000 PSI 3/8" NPT 0.75 10% 51.9 1270023 699.99
115/ 4.3 up to 600 PSI 3/8" NPT
B* 208-230 2 0.6 3,600 PSI 1.0 Cont 53.2 1270038 999.99
C* 115/230 2 4 600 PSI 3/8" NPT 7.0 Cont 67.0 8098188 1199.99
* Draws 22 amps @ 115 volts
POWER PACKS
SINGLE-STAGE GAS POWERED
HYDRAULIC POWER PACK
HONDA POWERED
13 HP HONDA GX ELECTRIC
• Portable hydraulic power pack for a wide START
variety of applications
• Max. cont. pressure: 2,500 PSI
• Max. cont. flow: 8 GPM
• Ports: #10 ORB
• Electric start
8056889 – Wt. 95.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
1449
HONDA POWERED
• Ideal for logsplitters, presses and trash
compactors
• These power packs can be used anywhere.
They have a gas engine coupled directly
to a 2-stage high/low hydraulic pump.
A
B
C
2 HP POWER PACK
POWER PACKS
CUSTOM BUILT POWER PACKS
GAS ENGINES ELECTRIC MOTORS SHAFT COUPLERS MOUNTING HYDRAULIC
BRACKETS PUMPS
SEE PAGE 92-93 SEE PAGE 83 SEE PAGE 97 SEE BELOW SEE PAGE 13-14
WE CAN HELP YOU BUILD A POWER PACK TO YOUR SPECIFICATIONS.
• Over 150 different possible power pack combinations
• Our PAL Hydraulics team members can help you make the right selection of motor/gas engine,
pump mounting bracket, shaft couplers and pump to meet your flow and requirements
A B C D
E F G
H
GAS ENGINE BRACKETS
HP Pump Mount Type Wt. (lbs.) ITEM PRICE
E 5 2-Bolt SAE Type A 1.9 8009308 39.99
F 8-20 2-Bolt SAE Type A 3.8 8001759 59.99
G 5 4-Bolt 1.3 2400463 39.99
H 8-20 4-Bolt + SAE Type “AA” 3.8 2400003 59.99
H 8-20 4-Bolt 3.8 8110751 49.99
POWER PACKS
12 VDC HYDRAULIC POWER PACKS
Specifications:
• 2.8 GPM @ 0 PSI @ 70 amps
• 1.3 GPM @ 2,500 PSI @ 260 amps
• Relief valve: preset @ 2,500 PSI, adjustable B
from 500 to 3,000 PSI
• Reservoir: .75 gallons
A) REPLACEMENT REMOTE SWITCHES
For single-acting, solenoid operated power pack
(8002286).
59
8002439 – Wt. 1.2 lbs. . . . . . . . . . . . . . . . . . . . .
99
Specifications:
• 2.4 GPM @ 0 PSI @ 80 amps
• 1.3 GPM @ 1,800 PSI @ 170 amps
• Relief valve: preset @ 2,000 PSI
• Ports: 1/4" NPT
• Reservoir: .4 gallons
• Designed to operate all functions of a power operated
angling snowplow
• The unit includes a lift-hold-lower function for the
blade, with a continuous “float” capability
• A directional valve controls angling of the blade and 2
cross-over reliefs protect the system from damage
should the blade become obstructed while plowing
• Includes remote switch box and 10 ft. cord
899
8002291 – Wt. 43.5 lbs. . . . . . . . . . . . . . . . . . . . . . . .
99
11
01 Hydraulics 6/6/06 8:28 AM Page 12
POWER PACKS
FEATURES:
• This self contained power pack can be used for
12 VDC 3-PISTON a wide range of applications including cranes,
HYDRAULIC PISTON PUMP dump boxes, tail gate lifts and farm machinery.
• Double acting manually controlled
• Motor starts and stops by activating the manual
valve control
• Max. continuous pressure: 5,000 PSI
• Max. continuous flow:
1.5 GPM @ 0 PSI @ 80 amps.
0.5 GPM @ 5,000 PSI @ 310 amps
• Relief valve: preset @ 3,000 PSI adjustable
from 500 to 5,000 PSI
PRESSURE UP TO • Ports: 1/4" NPT
5,000 PSI • Reservoir: 0.66 gallons
649
1270093 – Wt. 49.9 lbs. . . . . . . . . . . . . . . . .
99
SPX STONE
POWER PACK CONVERSION COMPONENTS
These components can be used with our existing power packs to either repair or modify them to
meet the specifications of a wide variety of applications.
STEEL
115/230 VAC RESERVOIRS
MOTORS
PUMP
PLUMBING KITS
ENDHEAD
12 VDC MOTOR
PLASTIC
RESERVOIRS
HIGH FLOW SUCTION
STRAINER
12 VDC MOTOR START SOLENOID
DC MOTOR PLUMBING KITS
ITEM PRICE ITEM PRICE
12 VDC 1270041 179.99 Horizontal 1270077 29.99
AC MOTORS Vertical 1270078 27.99
HP RPM Volts ITEM PRICE
1 3,450 115/230 1270042 499.99 RESERVOIRS
2 3,450 115/230 1270043 599.99 Nominal
PUMPS Type Capacity ITEM PRICE
Displacement (GALLONS)
ITEM PRICE
(Cu.In/Rev) Plastic 2.5 8002505 89.99
.061 1270047 139.99 Plastic 3.0 1270076 149.99
.098 1270049 109.99 Steel 1.5 1270067 109.99
.122 1270050 109.99 Steel 2.5 1270068 109.99
.305 1270054 149.99 Steel 3.0 1270069 129.99
ACCESSORIES
TYPE ITEM PRICE
End head 1270056 99.99
12 VDC Motor Start Solenoid 1270088 42.99
High Flow Suction Strainer 1270079 19.99
These components are available in all of our retail stores and through our mail order department.
Contact your local Princess Auto for more information!
12
01 Hydraulics 6/6/06 8:28 AM Page 13
HYDRAULIC PUMPS
12 VDC ELECTROMAGNETIC PUMPS
CLUTCH PUMPS
CLUTCHES
A compact,
efficient
way to provide a
source of
hydraulic power
for most trucks and
off-road vehicles.
Typical applications are snow removal
equipment, grain augers and conveyors,
A B C tow trucks, salt and de-icer spreaders, and
whenever hydraulic power is needed.
• Turn on the clutch to engage, turn off to disengage Features:
• Static breakaway torque of 90 ft.-lbs. • High strength alloy steel gear
• Clutch draws 3.9 amps when engaged and shaft set
• Solid forged rotor to maximize torque and prevent • Pressure balanced wear plates maintain
internal parts separation high pump efficiency throughout all
• Forged machined pulley resists damage from abusive operating ranges
environments • Doweled, high strength, 3-piece cast iron
• Wherever possible all clutch parts are e-coated to construction
protect against corrosion Specifications:
• Mounting type: SAE Type “A” bracket
Voltage must not drop below 12 VDC or clutch will slip with pad mount
and become damaged. • Rotation: clockwise
• Ports (rear and side): #20 ORB inlet, #12
A) V-BELT AA GROOVE ORB outlet
8045734 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . . . . . . . 19999 • Max. speed: 3,000 RPM
B) 6-GROOVE TYPE K SERPENTINE 6 GPM @ 1,000 RPM @ 3,500 PSI
8045742 – Wt. 8.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . 26999 8045775 – Wt. 30.8 lbs. . . . . . . . . .
99
369
C) 8-GROOVE TYPE K SERPENTINE 10 GPM @ 1,000 RPM @ 2,500 PSI
8045759 – Wt. 7.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . 26999 8045783 – Wt. 33.6 lbs. . . . . . . . . .
99
379
HYDRAULIC PUMPS
PUMP TO MOTOR
CONVERSION KIT
Converts pumps listed above to unidirectional motors.
8003893 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2499 13
01 Hydraulics 6/6/06 8:28 AM Page 14
HYDRAULIC PUMPS
PRINCE HYDRAULIC GEAR Features Benefits
Non-symmetrical gears Increased flow capacity,
PUMPS quieter running
Handle heavy loads, low
PTFE composite shaft speeds and high
bearings levels of contamination
HYDRAULIC PUMPS/MOTORS
• These compact pumps/motors are built with cast iron bodies and
hardened steel gears
• Suitable for use in agriculture, construction, and material handling
• Bi-rotational, 1/2" shaft, 1-1/2" long, 4-bolt flange with 1.78"
pilot flange
• #4 ORB case drain port must be returned to tank when used as a
motor if the return line pressure exceeds 50 PSI
• Can be belt driven with a max. sideload of 150 lbs.
• Max. RPM: Pump 4,000 RPM/Motor 5,500 RPM
Pressure Rating Flow
Displacement Port Size Wt.
(cu. in./rev) Continuous Intermittent @ 1,800 RPM @ 3,600 RPM (ORB) (lbs.) ITEM PRICE
PSI PSI GPM GPM
0.129 3,000 4,000 1.0 2.0 8 4.6 1220030 194.99
0.258 2,300 4,000 2.0 4.0 8 4.6 1220031 199.99
0.388 1,600 2,500 3.0 6.0 10 5.5 1220032 204.99
0.517 1,200 2,000 4.0 8.0 10 5.5 1220033 209.99
P.T.O. PUMPS
Ideal for use with front end loaders on tractors without integral hydraulics,
landscape equipment and backhoes. Slips onto tractor P.T.O. shaft, no
gearbox required.
• High tensile cast iron end plates and aluminum centre gear housing
• Self-adjusting wear plates on both sides of the gears offset wear and
expansion
• #16 ORB inlet and #12 ORB outlet ports
• 1-3/8" dia., 6-tooth internal splined drive shaft
• Standard speed: 540 RPM for 6-tooth shaft, max. 600 RPM
Displacement Max. PSI Flow @ 540 RPM Wt. (lbs.) ITEM PRICE
@ 2,000 PSI
5.7 cu. in./rev.
2,250 11.4 GPM 35.9 8005268 679.99
14 9.9 cu. in./rev.
2,250 21 GPM 40.0 8005213 729.99
01 Hydraulics 6/6/06 8:28 AM Page 15
HYDRAULIC PUMPS
GEROTOR MOTOR
• Compact and lightweight
• High speed
• Bi-rotational
• Shaft dia.: 9/16"
• Ports: #10 ORB
• Max. speed: 5,000 RPM
Features:
• Instantly reversible
• 1" shafts, 1/2" NPT ports
• Max. continuous flow: 16 GPM
(except for models with 3 cu. in./rev. displ.,
which are 12 GPM)
• 3-year manufacturer's warranty
Features:
• Instantly reversible
• 1-1/4" shaft, #10 ORB ports
• Max. continuous flow: 20 GPM
• #4 ORB case drain port*
*Should be used when more than 1 motor are connected in series.
Displ. Max. Cont. Max. Max.
Wt.
Model # (Cu. In. Pressure Speed Torque ITEM PRICE
/Rev.) (PSI) (RPM) (In.-lbs.) (lbs.)
OMS100 6.1 2,540 750 2,467 22.6 8037426 479.99
OMS250 15.3 2,030 300 4,932 26.3 8000709 499.99
OMS315 19.2 2,030 240 6,206 27.6 1220022 509.99
OMS400 24 1,520 190 5,804 29.7 8037434 529.99 15
01 Hydraulics 6/6/06 8:28 AM Page 16
FM55 SERIES
Features Benefits
Meets demand of higher flow
13 GPM @ 3,200 PSI actuators
Designed for where weight and
Compact Size space restrictions are specified
Convertible to single acting, Easily adaptable to fit a wide variety
motor spool, and detent of applications
positioning
Features:
• Max. continuous pressure: 3,200 PSI
• Max. continuous flow: 13.1 GPM
• Inlet/outlet and work port size: #10 ORB
• Relief valve: preset @ 2,030 PSI, adjustable from 1,450 to 3,625 PSI
SINGLE SPOOL
• Designed to control a double acting cylinder or a reversible
hydraulic motor
• 4-way, 3-position
179
8003849 – Wt. 6.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
Can I convert my hydraulic control valve to single acting by simply plugging one
of the work ports?
While this will work, it will also result in a lot of heat build up within the hydraulic
system because oil will go over the relief valve in one of the spool positions. The
best solution is to either replace the valve or change to a single acting spool
provided the design of the valve will allow it.
What is the advantage of using a control valve with a motor spool?
The motor spool connects both work ports back to tank when the valve is in the
neutral position. This allows hydraulic motors that are turning components with a lot
Control of inertia, such as large pulleys or sprockets to freewheel to a stop when the valve is
shifted to neutral. Without the motor spool the work ports would be blocked in
Valve neutral causing the motor to stop immediately. This could generate a very high
FAQs pressure spike and damage components in the hydraulic system.
What information do I need to decide which hydraulic control valve
is right for my system?
There are a number of important specifications you should know to aide in
the selection of a control valve.
1- Open or closed center 3- Maximum flow
2- Maximum pressure 4- Single acting, double acting or motor spool
While this is not a complete list of possible options it would provide enough
information to select the proper valve for most applications..
MISSING
Have you seen this child?
STEVEN O'BRIEN
Date of birth: May 14, 1974
Hair: Black Eyes: Brown (Wears glasses)
Missing since: Mar 20, 1993 Missing from: Charlottetown, PEI
1-800-387-7962
to report on a missing child anywhere in Canada
All calls confidential - No name required.
A missing child is everyone's responsibility.
16
01 Hydraulics 6/6/06 8:28 AM Page 17
A B
JOYSTICK
Features:
• Standard 3-position, 4-way/spring return to neutral unless otherwise stated
• Open centre
• Max. return line pressure: 1,100 PSI
• Relief valve pre-set @ 2,100 PSI, adjustable from 1,500 PSI to 3,750 PSI
• Control handles can be mounted in vertical or horizontal position
• Max. continuous pressure: 3,600 PSI
BM 20 SERIES
Max. continuous flow 4.5 GPM
Peak flow 6.6 GPM
Top inlet/outlet and work ports #6 ORB
Side inlet/outlet ports #8 ORB
BM 20
Wt. (lbs.) ITEM PRICE
A Single spool 3.7 1249531 149.99
A Double spool 5.5 1249549 249.99
A Three spool 7.5 1249556 349.99
BM 30 SERIES
Max. continuous flow 9 GPM
Peak flow 12 GPM
Top inlet/outlet and work ports #8 ORB
Side inlet/outlet ports #8 ORB BM 30
Wt. (lbs.) ITEM PRICE
A Single spool 4.6 1249598 119.99
BM 40 SERIES
Max. continuous flow 9 GPM
Peak flow 12 GPM
Top inlet/outlet and work ports #8 ORB
Side inlet/outlet ports #10 ORB
Wt. (lbs.) ITEM PRICE
A Single spool 5.6 1249721 169.99 BM 40
A Double spool 8.3 1249739 249.99
A Three spool 11.4 1249747 349.99
A Four spool 14.3 1249754 419.99
A Five spool 17.6 8050315 519.99
A Six spool 20.4 8050342 599.99
B Double spool (float/standard) 8.9 1249713 269.99
C Double spool with joystick 8.4 8006338 349.99
BM 70 SERIES
Max. continuous flow 17 GPM
Peak flow 24 GPM BM 70
Top inlet/outlet and work ports #10 ORB
Side inlet/outlet ports #12 ORB
Wt. (lbs.) ITEM PRICE
A Single spool 10.4 1249796 249.99
A Double spool 16.6 1249804 369.99
A Three spool 21.0 1249812 479.99
A Four spool 25.7 1249820 599.99
C Double spool with joystick 15.8 1249788 499.99
17
01 Hydraulics 6/6/06 8:28 AM Page 18
B
FULLY BACKED BY
OUR ROYAL
SERVICE PROMISE
F
A
G
C
ITEM PRICE
A) SINGLE ACTING SPOOLS Accessories are shown as optional parts for a
• BM20 valves 1259027 24.99 standard valve.
• BM30/40, FM55 valves 1259092 26.99 NOTE: All these accessories are easily field installed.
• BM70 valves 1259159 38.99
B) MOTOR SPOOLS ITEM PRICE
• BM20 valves 1259019 26.99 E) POWER BEYOND ADAPTERS
• BM30/40, FM55 valves 1259084 27.99 • BM20 valves 1259001 17.99
• BM70 valves 1259142 38.99 • BM40, FM55 valves 1259050 19.99
C) RELIEF VALVE PLUGS • BM70 valves 1259126 23.99
• BM20 valves 1250032 17.99 F) DETENT KITS
• BM30/40, FM55 valves 1259076 18.99 • BM20 valves 1259035 22.99
• BM70 valves 1250033 24.99 • BM30/40, FM55 valves 1259100 24.99
D) CLOSED CENTRE PLUGS • BM70 valves 1259167 29.99
• BM20 valves 1250107 15.99 G) MICRO SWITCHES
• BM40 FM55 valves 1259068 16.99 • BM20 valves 1259043 49.99
• BM70 valves 1259134 18.99 • BM30/40, FM55 valves 1259118 49.99
O-RING KITS
• Replacement valve spool O-rings
• Pkg. of 10
Wt. 0.2 lbs.
8006222 – BM20
8006226 – BM30/40, FM55
8006227 – BM70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 999
HYDRAULIC VALVE
REMOTE CONTROL SYSTEM
• The control connects to the front of BLB valves
allowing remote operation
• Remote valve control can be mounted up to
9-3/4 ft. away from the hydraulic valve
H) JOYSTICK REMOTE VALVE CONTROL
• Shift 2 hydraulic spools with 1 control
H • Weatherproof control can be mounted on
interior or exterior of vehicle
8000977 – Wt. 3.8 lbs. . . . . . . . . . . . . . . . . .
99
139
I) SINGLE AXIS REMOTE VALVE CONTROL
• Units can be mounted individually or stacked
for multi-spool valves
• Weatherproof control can be mounted on
interior or exterior of vehicle
8000986 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . .
99
49
J) REMOTE VALVE CONTROL CABLES
I Length Wt. (lbs.) ITEM PRICE
39" 0.7 8000995 54.99
J 59" 1.3 8001002 59.99
K 78" 1.7 8001020 64.99
118" 1.7 8001057 74.99
VALVE NOT K) VALVE CONNECTION KITS
INCLUDED Fits Valve Wt. (lbs.) ITEM PRICE
BM20 0.3 8031863 21.99
BM40 0.2 8001075 22.99
18 BM70 0.2 8001084 22.99
01 Hydraulics 6/6/06 8:28 AM Page 19
Specifications:
• Max. continuous pressure: 3,000 PSI
• Max. continuous flow: 20 GPM
• Relief preset at 1,500 PSI and adjustable from 500 to
3,000 PSI
• Max. return line pressure: 150 PSI
• Ports (NPT): 3/4" inlet/outlet, 1/2" work ports
• Open centre (Can be converted to closed centre) A
A) SINGLE SPOOL
3-position, 4-way
8107179 – Wt. 9.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 12999
B) SINGLE MOTOR SPOOL WITH DETENT
• 3-position, 4-way
• Workports are connected to tank in the neutral B
position
8107187 – Wt. 9.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . 14999
RD 5000 SERIES
Specifications:
• Max. continuous pressure: 3,000 PSI
• Relief preset at 2,000 PSI and adjustable from
1,500 to 3,000 PSI
• Max. return line pressure: 500 PSI
• Ports (NPT): 3/4" inlet/outlet, 1/2" work ports C
• Open centre
• In the detented 4th position (float) the work ports are
connected to tank, allowing the cylinder to float or the
motor to freewheel
• Can be converted to closed centre or power beyond
(with optional conversion plugs)
D
C) SINGLE SPOOL
• 3-position, 4-way
• Max. continuous flow: 30 GPM
8107328 – Wt. 14.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 17999
D) 2-SPOOL
• 3-position, 4-way
• Max. continuous flow: 25 GPM
8107344 – Wt. 23.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 26999
E) 3-SPOOL E
• 3-position, 4-way
• Max. continuous flow: 25 GPM
8107351 – Wt. 35.5 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 39999
F) SINGLE FLOAT SPOOL
• 4-position, 4-way F
• Max. continuous flow: 30 GPM
8107310 – Wt. 15.6 lbs. . . . . . . . . . . . . . . . . . . . . . . . . 199 99
19
01 Hydraulics corrections 6/8/06 5:04 PM Page 20
C E
A
D
B G
A) CLOSED CENTRE PLUG F
8107393 – Wt. 0.6 lbs. . . . . . . . . . . . . . . . . . 17 99
HANDLE BRACKET
Replacement handle bracket for 1242296.
7120082 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 695
20
01 Hydraulics corrections 6/8/06 5:05 PM Page 21
*Must be used with subplate Motor Spool Closed Centre Tandem Centre
(8051757) or an equivalent.
A) 12 VDC ACTIVATION
Wt. 4.6 lbs.
8046815 – MOTOR SPOOL
8046831 – TANDEM CENTRE
8046807 – CLOSED CENTRE . . . . . . . . 14999
B) 110 VAC ACTIVATION
Tandem centre with din connectors. B
8051609 – Wt. 4.6 lbs. . . . . . . . . . . . . . . 14999
A
D05 SPECIFICATIONS:
• Max. continuous pressure: 4,500 PSI
• Max. continuous flow: 28 GPM
*Must be used with subplate (8093239)
or an equivalent.
C) 12 VDC ACTIVATION
Wt. 12.9 lbs. C
8093080 – MOTOR SPOOL
8093072 – TANDEM CENTRE
8093106 – CLOSED CENTRE . . . . . . . 15999
DIN CONNECTOR
Replacement for 110 VAC D03 solenoid valve.
8045791 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 699
C) BOWDEN PIN
Attaches cable end to 3/16" thick lever with
1/4" hole.
419
3890502 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . . .
ADJUSTABLE YOKE WITH
ROD ENDS PIN A
C
Wt. 0.1 lbs.
Thread Size ITEM PRICE ITEM PRICE B
1/4" - 28 NF 3870009 3.29 3870020 12.99
5/16" - 24 NF 3870010 3.99 1/4" - 28 NF THREAD
3870021 13.99
3/8" - 24 NF 3870012 5.49 A: 2", B: 1-1/4", C: 9/32".
3870022 15.99
1/2" - 20 NF 3870013 9.99 3880036 – Wt. 0.1 lbs. . . . . . . . . . .
3870023 28.99 449
5/16" - 24 NF THREAD
A: 2-1/4", B: 1-7/16", C: 11/32".
3880044 – Wt. 0.1 lbs. . . . . . . . . . . 469
Wt. 0.1 lbs. 3/8" - 24 NF THREAD
Thread Size Hole Dia. ITEM PRICE ITEM PRICE A: 2-1/2", B: 1-5/8", C: 7/16".
1/4" - 28 NF 1/4" 3870025 11.99 3870015 8.99 3880051 – Wt. 0.2 lbs. . . . . . . . . . . 479
5/16" - 24 NF 5/16" 3870026 12.99 3870016 9.99 1/2"- 20 NF THREAD
3/8" - 24 NF 3/8" 3870027 14.99 3870017 11.99 A: 3", B: 1-7/8", C: 9/16".
1/2" - 20 NF 1/2" 3870028 24.99 3870018 22.99 3880069 – Wt. 0.4 lbs. . . . . . . . . . . . 599
SELECTOR VALVES
OPEN CENTRE HYDRAULIC SYSTEM
DEFINITIONS
PSI Pounds per Square Inch
D Diameter (Inches)
GPM Gallons per Minute
R Radius
mHP Horse Power
BASIC FORMULAS
π (Pi) 3.1416
R 1/2 D of a circle
Area of a πR2
Circle
RESERVOIR CYLINDERS
Volume Height (in.) x Length (in.) Force of a Cylinder Extended Force (lbs.) = Piston Area x PSI
of = x Width (in.) Time to Extend/Retract a Piston Area x Stroke x .26
Reservoir =
231 Cylinder (sec.) GPM
MOTORS PUMPS
Motor Speed GPM x 231 GPM x PSI
= HP to Drive a Pump =
(RPM) Displacement (in3/Rev.) 1714 x Pump Efficiency
Torque PSI x Displacement (in3/Rev.) -.85 to .9 for Piston or Vane
= Pump Efficiency
(inch-pounds) 2π -.75 to .85 for Gear
Torque (inch-pounds) x RPM Pump Output Displacement (in3/Rev.) x RPM
Horse Power Output = =
63,025 (GPM) 231
MANUAL OPERATED
SELECTOR VALVES A) 2-POSITION, 3-WAY SELECTOR VALVES
• Use to direct the incoming flow to either
outlet port
• Possible applications include individually
controlling 2 unidirectional motors or 2 single
acting cylinders with 1 control valve
B) 20 GPM MAX.
• Max. continuous pressure: 2,500 PSI
• Ports: # 8 ORB
8107211 – Wt. 4.0 lbs. . . . . . . . . . . . . . . . . . 7999
B
D) 40 GPM MAX.
• Max. continuous pressure: 2,500 PSI
• Ports: #12 ORB
D 8107229 – Wt. 10.9 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12999
24
01 Hydraulics 6/6/06 8:29 AM Page 25
SELECTOR VALVES
12 VDC SOLENOID
OPERATED SELECTOR VALVES
A) 2-POSITION, 3-WAY SELECTOR VALVE
• Use to direct the incoming flow to
either outlet port
• Possible applications include individually
controlling 2 unidirectional motors or 2 single
acting cylinders with 1 control valve
• Max. continuous pressure: 4,350 PSI
• DIN style electrical connector
16 GPM MAX.
#8 ORB ports.
8051773 – Wt. 4.1 lbs. . . . . . . . . . . . . . . . . .
99
219 A
27 GPM MAX.
#12 ORB ports.
8051781 – Wt. 8.4 lbs. . . . . . . . . . . . . . . . . .
99
349
B) 2-POSITION, 6-WAY SELECTOR VALVE
• Use to direct 2 incoming flows between 2 sets
of outlet ports
• Possible applications include operating 2 double
acting cylinders or bi-directional motors with
one 4-way, 3-position control valve C1 C2 C3 C4 C1 C2 C3 C4
• Max. continuous pressure: 4,350 PSI
• Max. continuous flow: 16 GPM B
• DIN style electrical connector
• #8 ORB ports
8051799 – Wt. 5.6 lbs. . . . . . . . . . . . . . . . . .
99
229
HIGH PRESSURE NEEDLE VALVES
C) #4 ORB PORTS
8051807 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . 2699
C
C) #6 ORB PORTS
• All steel construction 8051815 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . 2999
• Use inline to limit flow
within a hydraulic circuit C) #8 ORB PORTS
• Max. continuous pressure: 5,000 PSI 8051823 – Wt. 1.6 lbs. . . . . . . . . . . . . . . . . . 5399
HIGH PRESSURE
BALL VALVES
HIGH PRESSURE 2-WAY
D
• Body and ball are all steel construction E
• Max. continuous pressure: 7,250 PSI
D) #4 ORB PORTS
8046625 – Wt. 1.1 lbs. . . . . . . . . . . . . . . . . . . . . 2399 HIGH PRESSURE 3-WAY
D) #6 ORB PORTS E) #6 ORB PORTS
8046682 – Wt. 1.4 lbs. . . . . . . . . . . . . . . . . . . . 2499 Max. continuous pressure: 5,800 PSI.
D) #8 ORB PORTS 8046716 – Wt. 1.5 lbs. . . . . . . . . . . . . . . . . . . . 5899
8046690 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . 2899 E) #8 ORB PORTS
D) #12 ORB PORTS Max. continuous pressure: 5,075 PSI.
8046708 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . . . 5499 8046724 – Wt. 1.8 lbs. . . . . . . . . . . . . . . . . . . . 6199
TECH A pressure compensated flow control will deliver the same controlled flow
regardless of pressure as long as the inlet flow remains constant. If the inlet flow
TIP is increased or decreased the controlled flow will also vary accordingly. A priority
flow control will deliver the same controlled flow regardless of changes to the
inlet flow or pressure as long as the inlet flow exceeds controlled flow demand.
25
01 Hydraulics 6/6/06 8:29 AM Page 26
FLOW CONTROLS
PROPORTIONAL FLOW
DIVIDERS/COMBINERS • Proportional-type pressure compensated flow
divider separates a single flow of hydraulic
oil into 2 equal flows
• Max. continuous pressure: 3,000 PSI
A) SPOOL STYLE
• No reverse flow
• Max. inlet flow: 16-30 GPM
• Ports: 3/4" NPT
A
8107245 – Wt. 7.2 lbs. . . . . . . . . . . . . . . . 10999
B) SPOOL STYLE
• Combiner feature allows flow to be combined
in reverse direction
• Interlocking spools for equal control dividing
or combining
• Max inlet flow: 2.1-5.3 GPM
• Ports: #8 ORB
8046697 – Wt. 1.0 lbs. . . . . . . . . . . . . . . .
99
129
B
C) SPOOL STYLE
Allows the reverse flow of oil through free
reverse checks (Not pressure compensated).
Wt. 7.1 lbs.
8107278 – Max. inlet flow: 8-19 GPM
Ports: 1/2" NPT
8107252 – Max. inlet flow: 16-30 GPM
Ports: 3/4" NPT. . . . . . . . . . 14999
C
D) ROTARY GEAR STYLE
• Combiner feature allows flow to be combined
in reverse direction
• Efficient design resulting in very little
pressure drop or heat generation
• Built in differential relief valves to
synchronize cylinders and protect against
excessive differential pressure
• Max inlet flow: 9-18 GPM
• Ports: #10 ORB
8098212 – Wt. 10.0 lbs. . . . . . . . . . . . . .
99
299
D
F) 30 GPM MAX.
3/4" NPT ports.
26 F 1241025 – Wt. 8.0 lbs. . . . . . . . . . . . . . . . . . 119
99
01 Hydraulics 6/6/06 8:29 AM Page 27
RELIEF VALVES
PRIORITY TYPE ADJUSTABLE FLOW CONTROLS
• Designed for applications where 2 separate
hydraulic power circuits are to be
served from a single pump
• A constant regulated flow is maintained B
at the controlled flow port regardless of
changes in load, pressure, or input pump
flow, so long as input pump flow exceeds
controlled-flow port demand A
• Excess flow can be used in a secondary circuit
Max. Cont. Max. Priority Priority Inlet/Excess/ Wt.
Pressure Cont. Flow Flow Range Flow Port ITEM PRICE
Priority Ports (lbs.)
(PSI) (GPM) (GPM) (ORB)
A 3,000 30 2 - 12 3/4" NPT 3/4" NPT 7.3 8107286 129.99
B 3,600 9 0-9 #8 #10 ORB 2.7 1240028 139.99
F) RELIEF VALVE
• 2-port, poppet style
• Fast response, good stability and virtually leak free F
• Adjustable from 70 to 3,000 PSI
• Maximum continuous flow: 26 GPM
• Ports: #8 ORB
69
8106361 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
G) RELIEF VALVE
• 3 port, ball style
• Preset @ 1,500 PSI, and is adjustable from 700-3,000 PSI
• Maximum continuous flow: 30 GPM
CS
• 3/4" NPT flow ports, 1/2" NPT spill port G HYDR
AULI
119
1241587 – Wt. 3.2 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
HYDRAULIC VALVES
PILOT OPERATED CHECK VALVES
(LOCK VALVES)
• Require pressure from 1 work port to open the
return line of the other work port
• Holds the load in position, preventing creeping
• Best used with motor spool to prevent the
checks from not seating
V1 V1
E) POPPET STYLE
• Max. continuous pressure: 4,350 PSI
• Relief cartridges are preset @ 2,000 PSI and are
adjustable from 150 to 3,500 PSI
Max. Ports Wt. ITEM PRICE
Model # GPM
E (ORB) (lbs.)
E CP/DI/L/40 10 8 2.6 1240044 109.99
E CP/DI/L/80 20 10 4.9 1240045 129.99
F) POPPET STYLE
• Max. continuous pressure: 3,000 PSI
• Maximum continuous flow: 32 GPM
• Relief cartridge adjustable from 70-3,000 PSI
T
F • Ports: #8 ORB
139
8106379 – Wt. 1.0 lbs. . . . . . . . . . . . . . . . . .
99
P
28
01 Hydraulics 6/6/06 8:29 AM Page 29
HYDRAULIC HOSE
These simple and versatile little valves are an
inexpensive way to restrict the flow of oil to A
various components in a hydraulic system. They
are adjustable from 0 GPM to their maximum
rated capacity in one direction and capable of full
flow in the other direction.
Use to: B
• Control cylinder stroke speed
• Prevent pump cavitation by controlling
cylinders or motors with inertia loads
• Meter the flow to a hydraulic motor
to control speed Max. Max. Ports Wt. ITEM PRICE
GPM PSI (ORB) (lbs.)
Max. Max. Ports Wt. B 3.5 5,000 4 1.0 8094856 32.99
GPM PSI (ORB) (lbs.) ITEM PRICE B 15.0 5,000 6 1.1 8094864 34.99
A 7.5 4,350 8 1.0 8006748 44.99 B 19.0 5,000 8 2.3 8094872 54.99
A 11.25 4,350 10 1.4 8006757 49.99 B 44.0 5,000 12 2.3 8094880 74.99
1/4" NPT RIGID FITTINGS x 1/4" HOSE 5,000 PSI 1/2" NPT RIGID FITTINGS x 1/2" HOSE 3,500 PSI
Length Wt. (lbs.) ITEM PRICE Length Wt. (lbs.) ITEM PRICE
2 ft. 0.7 1290287 7.99 2 ft. 1.3 1290840 10.99
3 ft. 0.9 1290295 8.99 3 ft. 1.7 1290857 12.99
4 ft. 1.2 1290303 10.99 4 ft. 2.2 1290865 14.99
6 ft. 1.6 1290329 13.99 6 ft. 2.8 1290881 18.99
8 ft. 2.1 1290345 16.99 8 ft. 2.6 1290907 22.99
10 ft. 4.3 1290923 26.99
3/8" NPT RIGID FITTINGS x 3/8" HOSE 4,000 PSI 1/2" JIC SWIVEL FITTINGS x 1/2" HOSE 3,500 PSI
Length Wt. (lbs.) ITEM PRICE Length Wt. (lbs.) ITEM PRICE
2 ft. 1.0 1290568 8.49 2 ft. 1.3 8007250 14.99
3 ft. 1.3 1290576 9.99 3 ft. 1.7 8007251 15.99
4 ft. 1.6 1290584 11.99 4 ft. 2.1 8007252 17.99
6 ft. 2.3 1290600 14.99 6 ft. 2.8 8007259 22.99
8 ft. 3.0 1290626 17.99 8 ft. 3.5 8007260 26.99
TECH Twisting a hydraulic hose during installation can lead to its premature failure.
Installing a hose that flex's, and has as little as a 7 degree twist, can reduce
service life by as much as 90%. Also, twisted hydraulic hoses that are under
TIPS pressure have a greater chance of their fittings coming loose.
29
01 Hydraulics 6/6/06 8:29 AM Page 30
HYDRAULIC HOSE
HYDRAULIC HOSE CENTRE
SUCTION HOSE
• Use to connect your FREE*
hydraulic pump to your reservoir
• Can also be used for other HOSE
petroleum based applications
• Resistant to vacuum induced CLEANING
collapse which can result in
pump cavitation
• 2 styles available
• The hose cover is made of abrasion • 75% to 80% of all hydraulic system failures
and weather resistant neoprene rubber are caused by fluid contamination
• Reinforced with 4 spirals of high-tensile yarn • The firing of a projectile through the hose
• Temperature range: -40° to 95°C will strip out these contaminants and
(-45° to 203° F) prevent them from entering
• Not to be used for suctioning applications the hydraulic system
over 6 ft. • We will now be cleaning all new bulk
• Max. continuous pressure: 250 PSI hose and custom made hose assemblies
T-BOLT
NPT FITTINGS
CAPS PLUGS
25 per package. 25 per package.
HOSE PROTECTION
& BUNDLING SLEEVE:
TEXSLEEVE™
• Highly abrasion resistant design protects hose(s)
from being damaged when they are in contact
with friction points 3/4" I.D.
• Dense burst resistance nylon composition 8041998 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . 2299
contains pinhole leaks which could injure 1" I.D.
operators
• Provides leak containment in the event of a
8042004 – Wt. 0.5 lbs. . . . . . . . . . . . . . . . . 2499
1-1/4" I.D.
hose ruture
• Smooth surface makes it easy to slide over very
8042038 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . 2799
1-3/4" I.D.
long lengths of hose
• 15 ft. long
8042046 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . 2999
PAL Hydraulics offers a variety of sizes and styles of hydraulic fittings to
complete your installation or project. Size range: 1/8" to 2".
Four Types of Fittings:
NPT (National Pipe Thread) – Tapered thread, sealant is required for a good seal.
ORB (O-Ring Boss) – O-ring seals against a machined seat in port.
JIC (37° Flare) – Flare seats against opposite flare in port.
ORFS (O-Ring Face Seal) – O-ring seals by compression between machine
groove and fitting face.
METRIC – Straight thread, bonded seal required if attached to a port.
NPT BASIC
Thread Size MALE x MALE FEMALE x MALE Thread Size 90° ELBOW COUPLERS
(ORB x NPT) ITEM PRICE ITEM PRICE (JIC 37° x NPT) ITEM PRICE ITEM PRICE
#6 x 1/4" 1293299 3.39 8017692 6.99 1/4" x 1/4" 1294990 2.89 1293422 1.49
#6 x 3/8" 8058781 3.39 8017745 6.99 5/16" x 1/4" – – 1293430 1.89
#6 x 1/2" – – 8017754 7.99 3/8" x 1/4" 8032345 3.79 8088544 1.99
#8 x 3/8" 1293315 3.69 8017763 7.99 3/8" x 3/8" 1295013 3.99 1293448 1.99
#8 x 1/2" 1293323 3.69 8017772 7.99 3/8" x 1/2" 8058834 4.69 1294024 2.19
#10 x 1/2" 1293331 4.99 8017781 7.99 1/2" x 1/2" 1295021 4.89 1293455 2.59
#12 x 3/4" 1293513 6.99 8017807 12.99 5/8" x 1/2" 1295039 5.69 8058807 3.19
#16 x 1" 8059012 9.99 – – 3/4" x 3/4" 1295054 7.99 1293489 3.59
36 #20 x 1-1/4" 1290227 14.99 – – 1" x 1" – – 8058816 5.19
01 Hydraulics 6/6/06 8:29 AM Page 37
CYLINDER PORT
MALE X FEMALE
NIPPLE 90º ELBOW Thread Size
Thread Size ITEM PRICE Thread Size ITEM PRICE (ORB x NPT) ITEM PRICE
(ORB x ORFS) (ORB x ORFS) #6 x 1/4" 8059021 2.49
#6 x #6 8092918 1.99 #6 x #6 8089252 5.49 #6 x 3/8" 1290347 2.99
#8 x #6 8092926 2.49 #8 x #6 8089237 6.49 #8 x 3/8" 1290348 3.49
#8 x #8 8092934 2.39 #8 x #8 8089229 5.99 #8 x 1/2" 1290349 3.69
#10 x 1/2" 1290350 4.29
#10 x #8 8092942 2.99 #10 x #8 8092967 6.79 #10 x 3/4" 8059030 5.99
#12 x #12 8092959 4.99 #12 x #12 8092975 10.99 #12 x 1/2" 1290353 6.99
JIC 37° x O-RING BOSS ADAPTERS
Thread Size A) COUPLER B) 90° ELBOW C) LONG ELBOW
(JIC 37° x ORB) ITEM PRICE ITEM PRICE ITEM PRICE A
1/4" x #4 1294792 1.29 – – – –
3/8" x #6 1294800 1.49 1294859 4.69 8000727 8.99
3/8" x #8 8006363 1.59 8088353 4.69 – –
3/8" x #10 8006366 2.69 – – – –
1/2" x #6 8006362 1.69 8006378 4.79 – – B
1/2" x #8 1294818 1.79 1294867 5.99 8000704 11.99
1/2" x #10 8045340 2.69 8006370 6.49 – –
1/2" x #12 8006367 3.79 – – – –
5/8" x #8 8088445 4.49 – – – – C
5/8" x #10 1294826 2.69 1294875 8.29 8000702 15.99
5/8" x #12 8006368 4.29 – – – –
3/4" x #12 1294834 4.29 – – – –
QUICK COUPLERS
O-RING BOSS x NPT TEFLON TAPE
SWIVEL ADAPTERS
MALE X FEMALE
Thread Size COUPLERS 90° ELBOW
(ORB x NPT) ITEM PRICE ITEM PRICE
#4 x 1/4" 1292291 3.19 – –
#5 x 1/4" 8059218 5.69 – –
#6 x 1/4" 1292309 3.49 8032791 6.79 Seals all threaded valve and pipe
#6 x 3/8" 1292317 3.69 8058139 6.79 joints. Withstands pressures up to
#6 x 1/2" 8001420 6.99 8001418 8.99 10,000 PSI.
#8 x 1/4" 8058996 4.29 – – Thread Size ITEM PRICE
#8 x 3/8" 1292325 4.69 1292424 8.49 1/2" x 16 ft. 1250086 0.39
#8 x 1/2" 1292333 3.89 1292432 8.49 1/2" x 40 ft. 1250620 0.99
#10 x 3/8" 1292341 4.89 8059147 8.99 3/4" x 32 ft. 1250087 1.29
#10 x 1/2" 1290006 4.99 1292457 9.29 1" x 65 ft. 1250088 1.99
#10 x 3/4" 1292358 6.79 – –
10 per pkg.
#12 x 3/4"
#16 x 1"
1294412 6.99
1295310 10.99
8000705 14.99
8059003 17.99
1253285 – Wt. 0.2 lbs. . . . . . . . . . . .
99
6
QUICK COUPLERS
F
B
G
C H
QUICK COUPLER
QUICK COUPLERS
FLAT FACE HYDRAULIC
DUST CAPS QUICK COUPLERS
& PLUGS
B C D
FEATURES:
• Can be built to any dimensions to fit most
applications
• Over 50 possible port positions and 8 different
port sizes
• Heavy 12-gauge steel construction
• Interior baffle plate
• Optional features include an oil temperature/level
gauge and filler/strainer breather cap assembly
• Painted black and treated internally with a rust
preventative oil
OIL RESERVOIRS
OIL RESERVOIRS
ECONOMY RESERVOIRS
5 GALLON
• Inlet/outlet ports: 1-1/4" NPT
• O’all dim.: 8.7"H x 16.5"L x 12"W
1250106 – Wt. 25.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . 7999
10 GALLON
• Inlet/outlet ports: 1-1/4" NPT
• O’all dim.: 11.5"H x 16.5"L x 16.5"W
8001466 – Wt. 38.2 lbs. . . . . . . . . . . . . . . . . . . . . . 11999
OIL TEMPERATURE/ LEVEL GAUGES
Mounts on the side of hydraulic reservoir tank.
Temp. Range Bolt Mounting Wt.
ºC ( ºF ) Centers Bolt (Size) ITEM PRICE
(lbs.)
E 30º to 80º
E (86º to 176º) 3.15" M10 0.4 8093031 8.99
F 20º to 70º
40 F (68º to 158º) 5.0" M12 0.7 8093023 9.99
01 Hydraulics 6/6/06 8:30 AM Page 41
OIL RESERVOIRS
12 VDC OIL LEVEL RETURN LINE MANIFOLD
SENSOR KIT
• Installs in reservoirs
and provides the operator • Use to eliminate numerous return
with an in cab low oil level indicator light lines back to the reservoir
• Slosh bucket on fluid level switch increases accuracy • Made of 11-gauge steel
• Requires a 1" NPT port in the reservoir top • Has 6 ports, three 3/4" NPT, two 1"
• Indicator light presses into any 1/2" diameter hole. NPT, and one 1/4" NPT port
79
8087777 – Wt. 0.7 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99 8076051 – Wt. 10.1 lbs. . . . . . .
99
89
RETURN LINE
HEAT EXCHANGERS
• Allows hydraulic fluid to be
either heated or cooled
• Can also be used for many
other applications where
fluid heating or cooling is required
• Side oil inlet/outlet ports: 3/4" NPT
• Top coolant inlet/outlet ports: 3/4" NPT
• Features 26 interval brass
• Features 11 internal brass cooling tubes cooling tubes
• Max. continuous pressure: 150 PSI • Max. continuous pressure: 170 PSI
• Max. continuous flow: 16 GPM • Max. continuous flow: 26.4 GPM
8093007 – Wt. 18.5 lbs. . . . . . . . . . . . . . . . . 129 99
8113615 – Wt. 26.6 lbs. . . . . . . . . . . . . . . . . 17999
HYDRAULIC OIL
A) ALL SEASON MULTIGRADE HYDRAULIC OIL
• All-season hydraulic oil is designed for
HYDRAULIC OIL hydraulic systems which operate in a wide
range of temperatures
• Ideal for logsplitters and other all-season
equipment
• Not suitable for hydrostatic tractor systems
A 8102972 - 4 litre – Wt. 8.1 lbs. . . . . . . . . . .
99
10
8102998 - 10 litre – Wt. 19.0 lbs. . . . . . . .
99
25
8102964 - 20 litre – Wt. 39.2 lbs. . . . . . . .
99
49
B) TGH HYDRAULIC OIL
• A multi-purpose, extreme pressure, tractor
transmission/hydraulic fluid
• Recommended for transmissions, differentials,
final drives, hydraulic and power steering
systems, as well as wet brakes, P.T.O. and
hydrostatic drives
8103004 - 10 litre – Wt. 19.9 lbs. . . . . . . .
99
28
8103012 - 20 litre – Wt. 40.7 lbs. . . . . . . .
99
56
C) TGH ARCTIC HYDRAULIC OIL
• Outstanding low temperature performance
(-48 ºC pour point)
• Same specifications as the above
TGH fluid
8103020 - 20 litre – Wt. 39.8 lbs. . . . . . . . .
99
58
D) ANTI-WEAR HYDRAULIC OIL
B • Recommended for high pressure mobile and
industrial hydraulic systems where anti-wear
hydraulic fluids are specified
• Also provides excellent performance in machine
tools, servo controls, metal working equipment
and air compressor applications
• Not suitable for hydrostatic tractor systems
ISO Qty. Wt.
Rating Pour Point (litre) (lbs.) ITEM PRICE
22 -34° 20 40.8 8004474 39.99
C D 32 -32° 20 39.8 6460034 39.99
68 -29° 20 39.9 6460002 39.99
TANK FLANGES
*For use in higher temperature applications • Provides a seal for return or
Oil cannot be shipped suction lines entering
the reservoir
• No welding required
STAMPED STEEL PORT
FLANGES Pipe or
Tubing Wt. (lbs.) ITEM PRICE
(OD)
• These port flanges make quick 3/4" 1.2 8113599 9.99
and easy work of adding a 1" 1.2 8113607 9.99
threaded port to a reservoir
• Just cut pilot hole in tank and weld on threaded MAGNETIC PLUGS
port flange
• Square head design
Size (NPT) Wt. (lbs.) ITEM PRICE • Used to protect hydraulic systems
1/2" 0.1 1290230 2.49 by magnetically collecting ferrous particles
3/4" 0.2 1290231 2.99
1" 0.1 1290232 3.29 Size (NPT) Wt. (lbs.) ITEM PRICE
1-1/4" 0.2 1290233 3.49 3/8" 0.1 1293661 1.99
1-1/2" 0.3 1290234 3.99 1/2" 0.1 1293679 2.29
2" 0.3 1290235 3.99 3/4" 0.2 1293687 2.49
BREATHERS
E) 40 MICRON RATED FILTER
Breather filters are a must for hydraulic systems, 10 CFM airflow capacity.
ensuring clean air passing into the reservoir. This Size (NPT) Wt. (lbs.) ITEM PRICE
prolongs the life of the system's components. E 3/8" 0.2 1250090 8.99
E 1/2" 0.3 1250092 12.99
E 3/4" 0.6 1250093 15.99
E F E 1" 0.7 1250094 21.99
F) SLIP-ON BREATHER CAP
Fits 1-1/2 O.D. pipe.
42 6
1252923 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . .
99
01 Hydraulics 6/6/06 8:30 AM Page 43
SUCTION/RETURN LINE
STRAINER & DIFFUSER A
B
• Prevent fine particles from entering and
damaging the hydraulic pump or system
• Made with #100 mesh stainless steel wire cloth
elements, in pleated construction
• Equipped with a bypass relief valve
HYDRAULIC FILTERS
HYDRAULIC FILTERS INLINE FILTER HEADS
MAX. CONTINUOUS PRESSURE: 200 PSI
• Dirt is the number one killer of hydraulic
components
A B • Microscopic dirt particles can score valves,
seize pumps and damage cylinders resulting
in expensive repairs
• Hydraulic filters are an inexpensive way to
protect all your hydraulic components
• Choose a filter that is large enough to handle
C D 1-1/2 times the system flow
Inlet/Outlet Bypass Pressure Element Max. Cont. Flow (GPM) Wt. ITEM PRICE
Ports (NPT) (PSI) Threading Return Suction (lbs.)
A 3/8" N/A 3/4"-16 7 2 0.2 8076085 11.99
B 1/2" 25 1"-12 15 5 0.6 8076069 11.99
C 3/4" 25 1"-12 15 5 0.6 8006258 11.99
D 1" 25 1"-12 15 5 0.9 8076077 11.99
FILTERS
PNEUMATIC PRODUCTS
• Features an aluminum cylinder body and
PNEUMATIC PRODUCTS chromed steel shaft
• Max. continuous pressure: 130 PSI
PNEUMATIC PRODUCTS
SINGLE ACTING CYLINDER
• Features an aluminum cylinder body
and chromed steel shaft
• Bore size: 1.3" (32 mm), stroke: 1" (25 mm)
• Port size: 1/8" NPT
• Shaft dia.: 0.5" (12 mm)
• Rod end threading: M10 x 1.25
• Max. continuous pressure: 100 PSI
NORMALLY SPRING RETRACTED
Extended length: 3.3" (83 mm) MEMBER OF THE FLUID
8041394 – Wt. 0.8 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5699 POWER SOCIETY
46 K 20 mm
x 1.5
0.4"
(11 mm) 2.2" (55 mm)
3.0" x 3.0"
(75 x 75 mm) 2.9 8091670 49.99
01 Hydraulics 6/6/06 8:30 AM Page 47
PNEUMATIC PRODUCTS
PNEUMATIC VALVES
5-WAY, 2-POSITION
• Max. continuous pressure: 130 PSI 5-WAY, 3-POSITION
• Max. continuous flow: 36 CFM • Max. continuous pressure: 130 PSI
• Momentary actuation • Max. continuous flow: 28 CFM
• Three 1/4" NPT pressure ports and two 1/8" • Ports: 1/4" NPT
NPT exhaust ports 8063240 – Wt. 1.7 lbs. . . . . . . . . . . . . . . . . . . . 7999
8004046 – Wt. 0.4 lbs. . . . . . . . . . . . . . . . . . . .
99
31
ROLLER TYPE LEVER CONTROL VALVE
2-WAY, 2-POSITION
• Max. continuous pressure: 130 PSI
• Max. continuous flow: 60 CFM
• Ports: 1/4" NPT
• Normally closed
8004049 – Wt. 0.3 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1499
PNEUMATIC PRODUCTS
SOLENOID VALVES
All valves feature: Also suitable for
• Forged brass body, NBR diaphragm water and oil
• 2-way, 2-position
• Normally closed
A B C D E
Male/Female Male Male Hose Coupler Tee Male "Y" Hose Coupler
Hose Coupler Tee Hose Coupler
Wt. Item Price Wt. Item Price Wt. Item Price Wt. Item Price
0.1 8092579 3.49 0.1 8092595 1.29 0.1 8092652 2.39 0.1 8092660 3.49
PNEUMATIC PRODUCTS
• Hose(s) easily push into the fitting creating an
PNEUMATIC FITTINGS airtight seal
• Max. continuous pressure: 130 PSI
• Hose size: 1/4" O.D.
• Fitting thread size: 1/4" NPT
• 1/4" OD
• Polyethylene construction • Metered airflow in one
• Max. continuous pressure: 125 PSI direction full flow in the other
• Temperature range: -40°C/-40°F • Max. continuous pressure: 130 PSI
to 71°C/160°F • Hose O.D.: 1/4"
• Length: 100 ft. 99 • End Size: 1/4" NPT
8112682 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . 11 8092553 – Wt. 0.1 lbs. . . . . . . . . . . . . . . . . . . . . . 799
CERTIFIED MOBILE HYDRAULIC TECHNICIANS
Princess Auto currently has 8 MHTs working within our Retail Stores, Home Office and
Manufacturing. They work together with store Team Members that have completed their
Hydraulics Level 1 and Hydraulics Level 2 training program to help provide the customers with
the best possible hydraulic knowledge and service. We will be continuing our hydraulics
training in 2006-2007 to improve customer service.
Tim Goody
Mississauga
Wayne Stronghill
Tom Manfield Paul Cantin Angrej Virk London
Edmonton Gary Laws Winnipeg Winnipeg
Winnipeg
Ian Kirton
Ottawa
Brian Letcher
Calgary
49