Beruflich Dokumente
Kultur Dokumente
CAMGTCFG)
Function
Use this command to modify the settings of parameters related to carrier aggregation management.
Note
Parameters
ID Name Description
CarrAggrA6Offset Carrier Meaning: Indicates the offset for secondary cell event
Aggregation A6. This offset is the difference between the quality of a
A6 Offset neighboring cell and that of the serving cell. A large
value indicates that a neighboring cell must have a
better quality than the serving cell for reporting the event
A6.
GUI Value Range: -30~30
Unit: 0.5dB
Actual Value Range: -15~15
MML Default Value: None
Recommended Value: 2
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: None
Applicable Mode: L
SCellAgingTime SCell Aging Meaning: Indicates the length of aging time of the SCells
Time that are dynamically configured for CA UEs in a cell in
frequency-based CA configuration scenarios. If no CA
UE is performing carrier aggregation between an SCell
and the PCell within the aging time, the eNodeB cancels
the association between the SCell and the PCell.
GUI Value Range: 1~65535
Unit: min
Actual Value Range: 1~65535
MML Default Value: None
Recommended Value: 15
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: None
Applicable Mode: L
FTRelaxedBHCaDLMaxCcN FDD TDD Meaning: Indicates the maximum number of FDD and
um Relaxed BH TDD component carriers that can be aggregated in the
CA DL Max downlink in FDD+TDD CA in relaxed backhaul
CC Num scenarios. If this parameter is set to DL0CC(DL0CC),
relaxed-backhaul-based downlink FDD+TDD CA is not
supported. If this parameter is set to DL2CC(DL2CC),
the maximum number is two.
GUI Value Range: DL0CC(DL0CC), DL2CC(DL2CC),
DL3CC(DL3CC), DL4CC(DL4CC), DL5CC(DL5CC)
Unit: None
Actual Value Range: DL0CC, DL2CC, DL3CC, DL4CC,
DL5CC
MML Default Value: None
Recommended Value: None
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: None
Applicable Mode: L
FddTddCaUlMaxCcNum FDD TDD Meaning: Indicates the maximum number of FDD and
CA UL Max TDD component carriers that can be aggregated in the
CC Number uplink. If this parameter is set to 2CC(2CC), the
maximum number is two.
GUI Value Range: 0CC(0CC), 2CC(2CC)
Unit: None
Actual Value Range: 0CC, 2CC
MML Default Value: None
Recommended Value: None
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: None
Applicable Mode: L
FddTddCaDlMaxCcNum FDD TDD Meaning: Indicates the maximum number of FDD and
CA DL Max TDD component carriers that can be aggregated in the
CC Number downlink. If this parameter is set to 2CC(2CC), the
maximum number is two.
GUI Value Range: 2CC(2CC), 3CC(3CC), 4CC(4CC),
5CC(5CC)
Unit: None
Actual Value Range: 2CC, 3CC, 4CC, 5CC
MML Default Value: None
Recommended Value: None
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: None
Applicable Mode: L
LaaCarrAggrA1ThdRsrp LAA Carrier Meaning: Indicates the RSRP threshold for event A1 of
Aggregation the PCell in LAA CA. If the measured RSRP value
A1 RSRP exceeds this threshold, an A1 measurement report will
Threshold be sent. This parameter applies only to LTE FDD.
GUI Value Range: -140~-43
Unit: dBm
Actual Value Range: -140~-43
MML Default Value: None
Recommended Value: -98
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: none
Applicable Mode: L
LaaCarrAggrA2ThdRsrp LAA Carrier Meaning: Indicates the RSRP threshold for event A2 of
Aggregation the PCell in LAA CA. If the measured RSRP value is
A2 RSRP less than this threshold, an A2 measurement report will
Threshold be sent. This parameter applies only to LTE FDD.
GUI Value Range: -140~-43
Unit: dBm
Actual Value Range: -140~-43
MML Default Value: None
Recommended Value: -105
Parameter Relationship: None
Service Interrupted After Modification: No (And no
impact on the UE in idle mode)
Impact on Radio Network Performance: None
Applicable Mode: L
Example