Beruflich Dokumente
Kultur Dokumente
00
MSP-16-Exp
CALL CARD FOR LANDING FLOORS
IN PARALLEL INSTALLATION SYSTEMS
HARDWARE MANUAL
MSP-16-Exp Hardware Manual Version: V1.00
E-mail: info@arkel.com.tr
www.arkel.com.tr
This document has been created to be a guide for Arkel customers. Reproduction, transfer, distribution or storage of part or
all of the contents in this document in any form without the prior written permission of Arkel is prohibited. Arkel reserves
the right to make changes and improvements to any of the products described in this document without prior notice.
Arkel is not responsible for those mistakes that may be found in this manual and for the damages that they may cause.
MSP-16-Exp Hardware Manual Version : V1.00
1. MSP-16-Exp Overview
MSP-16-Exp board is designed to collect the calls coming from landings for the systems which have 16 floors or less. Also,
they are designed for the control of call leds, displays (Direction, floor number information). The landing calls are controlled
in MSP-16-Exp board up to 16 floors with single button, and up to 9 floors with double button. It is used in systems with
ARCUBE panel by connecting to LCB control card.
General
Dimensions
Width × Length × Height (mm) 165 x 79× 32 (All female terminals are plugged in)
Operating temperature 0 - 60 °C
Weight 182 gr.
Electrical Characteristics
Supply voltage Via LCB
0,984W (Standby)
Power consumption
2,95W (Max. power consumption)
Gray/Inverted
Gray/Binary/Inverted Binary Max.100 mA output current for each at 24V
(M0, M1, M2, M3)