Beruflich Dokumente
Kultur Dokumente
Hermann-Krum-Straße 2
PRODUCT DATA
D-88319 Aitrach
Fon +49 (0 ) 75 65 5 08-0
Fax +49 (0 ) 75 65 5 08-88
2000 kg 1 / 2600 kg
info@multiparking.com
www.multiparking.com 2
Width dim.
80
without door DB (double platform) = 4 vehicles
Suitable for
6Cutting through
Headroom according 12
Width dim.
with door according to clearance and maximal
to local regulations
Function surface load.
8
Standard Special 3
Delimitation
Page 4 width 190 cm 4 190 cm 4
Approach
weight max. 2000 kg max. 2600 kg
100
Load plan
wheel load max. 500 kg max. 650 kg
45
55
see table
7
Grounding
Water drainage 9 10
Page 6 15° 13°
6°
Technical 1-2% 1-2% 100 125
data 500 (520)
5
5
5
380 (350)
5
360 (340)
350 (335)
330 (325)
320
165
170
170
180
175
185
185
190
195
200
car height car height car height car height car height
height upper lower height upper lower height upper lower height upper lower height upper lower
320 150 150 330 155 155 350 165 165 360 170 170 380 180 180
(325) 150 155 (335) 150 165 (340) 150 170 (350) 150 180
2072i-205 2072i-215 2072i-220 2072i-230
5
5
5
5
420 (370)
430 (375)
450 (385)
400 (360)
205
210
215
220
220
225
230
235
Page 3
Width dim. B1 B1 B1 Carriageway in
with door accordance with
Function usable platform width B1 usable platform width B1 usable platform width B1 local regulations
230 260 460 490 230 + 460 750
240 270 470 500 240 + 470 770
Page 4 250 280 480 510 250 + 480 790
Approach 260 290 490 520 250 + 500 810
Load plan 270 300 500 530 270 + 500 830
510 540 270 + 510 840
520 550 270 + 520 850
530 560 270 + 530 860
Page 5 540 570 270 + 540 870
Installation
Electrical
installation
Columns in pit
Single Platform (EB) Double Platform (DB) Single and Double Platform (EB + DB) – Example
Page 6
Technical
data
max.
max.
max.
EB EB DB DB EB DB EB DB
30
30
30
Page 7
max.
max.
max.
140
140
140
To be perfor-
med by the B2 B3 min. 20 B2 B3 min. 20 B2 B3 min. 20
customer
Carriageway in
accordance with
Description
usable platform width B2 B3 usable platform width B2 B3 usable platform width B2 B3 local regulations
230 255 245 460 485 475 230 + 460 745 735
240 265 255 470 495 485 240 + 470 765 755
250 275 265 480 505 495 250 + 480 785 775
260 285 275 490 515 505 250 + 500 805 795
270 295 285 500 525 515 270 + 500 825 815
510 535 525 270 + 510 835 825
520 545 535 270 + 520 845 835
530 555 545 270 + 530 855 845
540 565 555 270 + 540 865 855
EB EB DB DB EB DB EB DB
For parking boxes on the edges and boxes with intermediate walls we recommend our maximum platform width of 270 cm
for single platforms and 540 for double platforms. Problems may occur if smaller platform widths are used (depending on
car type, access and individual driving behaviour and capability).
For larger limousines and SUV wider driveways are necessary (in particular on the boxes on the sides due to the missing
manoeuvring radius).
MultiBase 2072i | Code number 587.29.630-002 | Version 08.2016 Page 3 of 7
Page 1
Garage with door Width dimensions for garage with door
Section
Dimensions
Free space for A1 13 Single platform (EB)
Car data
roller shutter
Page 2
Width dim. EB EB EB
without door
80
A3 15
Page 3 B7 B7 B7 B8 B8
Width dim. B6 B6 B6
with door
Carriageway in accordance
Height
to door specifications
Headroom according
Function
with local regulations
A2 13
usable platform width door entrance width B6 B7 B8 u
Page 4 230 230 15 30
Approach 240 240 15 30
Load plan 250 250 15 30
260 260 15 30
270 270 15 30
Page 5 Double platform (DB)
Installation
Electrical
installation
DB DB DB
Page 6 Water drainage 14
15
Technical
data
A3
1-2% 1-2%
B7 B7 B7 B8 B8
A3 13 B6 B6 B6
Carriageway in accordance
50
Page 7
To be perfor- with local regulations
med by the
customer 13 Dimensions A1, A2 and A3 must be coordinated with the usable platform width door entrance width B6 B7 B8
Description door supplier (provided by the customer). 460 460 15 30
470 470 15 30
14 Slope with drainage channel and sump. 480 480 15 30
490 490 15 30
15 Seat-engaging surface (dimensions require coordination with 500 500 15 30
door supplier.) Allround door dimensions require coordination 510 510 15 30
between door supplier and local agency of KLAUS Multiparking. 520 520 15 30
530 530 15 30
540 540 15 30
For parking boxes on the edges and boxes with intermediate walls we recommend our maximum platform width of 270 cm
for single platforms and 540 for double platforms. Problems may occur if smaller platform widths are used (depending on
car type, access and individual driving behaviour and capability).
For larger limousines and SUV wider driveways are necessary (in particular on the boxes on the sides due to the missing
manoeuvring radius).
Function
System lifted System lowered
MultiBase 2072i | Code number 587.29.630-002 | Version 08.2016 Page 4 of 7
Page 1
Approach
Section
Dimensions
Car data
Page 2
Width dim.
without door
Page 3
Width dim. maximum maximum
with door descending ascending
Function slope 3 % slope 10 %
Page 4
Approach
The illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious
Load plan
maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking
accepts no responsibility.
Load plan
Page 5
Installation
Electrical
installation
F5 F6 F6 F5 F5 F6 F6 F5
F2 F2 F2 F2
Page 6
F3 F4 F4 F3 F3 F4 F4 F3
Technical
data
F6
F4
Page 7
H1
To be perfor-
med by the F1 F1 F1 F1
customer
F5
Description
F3
15
F2 F1 EB DB
Marking 17 Marking 17
520 (540)
Page 2
35 10 35 10 35 10 35 10
Width dim.
without door
Free space for vertical pipelines,
ventilation branch canals
30
Page 3
Width dim.
with door Approach level
Function
Page 4 20 20
Approach
Load plan
B2 19 B3 19 B2
Page 7
To be perfor-
≥20 ≥20
med by the
Free space only applicable if vehicle is parked forwards = FRONT FIRST and driver’s door on the left side.
customer
Description
Electrical installation
Installation diagram Electrical data (to be performed by the customer)
1 No. Qunatity Description Position Frequency
1 1 Electricity meter in the supply
2 line
3 2 1 Main fuse:
3 x fuse 16 A (slow)) in the supply 1 per
or circuit breaker 3 x 16 A line 3,0 kW
6 (trigger characteristic K or C) unit
8 3 x fuse 20 A (slow)) in the supply 1 per
12 or circuit breaker 3 x 20 A line 5,2 kW
7 (trigger characteristic K or C) unit
13 Conduit EN 25 (M25) 3 1 Supply line 5 x 2,5 mm2 to main switch 1 per unit
(3 PH + N + PE) with marked wire
height: + 1.70 m and protective conductor
11
180
No. Description
14 6 Lockable main switch
7 Supply line 5 x 2,5 mm2 (3 PH + N + PE) with marked wire
and protective conductor
8 Junction box unit
9 Wiring harness multiparking system
4 5 10 Connection cable (operating device)
to the next 11 Operating device
system 12 Control line 4 x 2,5 mm2 with marked wire and protective conductor
13 Hydraulic unit 3,0 kW/5,2 kW, three-phase current, 400 V / 50 Hz 20
Sound insulation
According to DIN 4109 (Sound insulation in buildings), para. 4,
Page 7
annotation 4, KLAUS Multiparkers are part of the building services
To be perfor-
med by the
(garage systems).
customer
Description Normal sound insulation:
DIN 4109, para. 4, Sound insulation against noises from building
services.
Table 4 in para. 4.1 contains the permissible sound level values
emitted from building services for personal living and working
areas. According to line 2 the maximum sound level in personal
living andworking areas must not exceed 30 dB (A).
Noises created by users are not subject to the requirements
(see table 4 , DIN 4109).
The following measures are to be taken to comply with this value:
– Sound protection package according to offer/order
(KLAUS Multiparking GmbH)
– Minimum sound insulation of building R’w = 57 dB
(to be provided by customer)
13857 in order to provide protection for the park pits for pathways
Electrical supply to the main switch / Foundation earth connector
Page 2 directly in front, next to or behind the unit. This is also valid during
Width dim. construction. Railings for the system are included in the series Suitable electrical supply to the main switch must be provided by
without door
delivery when necessary. the customer during installation. The functionality can be monitored
on site by our fitters together with the electrician. If this cannot be
Numbering of parking spaces done during installation for some reason for which the customer
Page 3 Consecutive numbering of parking spaces. is responsible, the customer must commission an electrician at
Width dim. their own expense and risk.
with door Building services In accordance with DIN EN 60204 (Safety of Machinery. Electrical
Any required lighting, ventilation, fire extinguishing and fire alarm
Function
Equipment), grounding of the steel structure is necessary, provided
systems as well as clarification and compliance with the relevant by the customer (distance between grounding max. 10 m).
Page 4 regulatory requirements. Operating device
Approach
Drainage Cable conduits and recesses for operating device (for double wing
Load plan
doors: please contact the local agency of KLAUS Multiparking).
For the front area of the pit we recommend a drainage channel,
which you connect to a floor drain system or sump (50 x 50 x 20 cm). Operating device exposed Operating device concealed
The drainage channel may be inclined to the side, however not the 120 above
Page 5
pit floor itself (longitudinal incline is available). For reasons of 110 above
Installation carriageway carriageway
Electrical
environmental protection we recommend to paint the pit floor, and level level
installation to provide oil and petrol separators in the connections to the public
15
sewage network.
= = = =
7
Page 6 Strip footings
Technical
If due to structural conditions strip footings must be effected, the
20
data
customer shall provide an accessible platform reaching to the top
of the said strip footings to enable and facilitate themounting work.
Conduit EN 25 (M25) 9 9
9
Page 7 Marking
To be perfor- According to DIN EN 14010, a warning that identifies this If the following are not included in the quotation, they will
med by the danger area must be placed in the entrance area that conforms also have to be provided / paid for by the customer:
customer
to ISO 3864. This must be done according to EN 92/58/EWG
Description
for systems with a pit (platforms within the pit) 10 cm from the – Mounting of contactor and terminal box to the wall valve,
edge of the pit. complete wiring of all elements in accordance with the circuit
diagram
– Costs for final technical approval by an authorized body
– Main switch
– Control line from main switch to hydraulic unit