Beruflich Dokumente
Kultur Dokumente
Pleasant &
Healthy
Air-Distribution
www.dasco.com.kw
ISO 9001:2000
Since 1964
www.dasco.com.kw
air-conditioning (HVAC) systems.
Introduction
SINGLE DEFLECTION RETURN AIR GRILLES & REGISTERS
GENERAL
Dasco Return air grilles and registers (DG-15
and DR-15) are designed to suit HVAC app-
plications where a high side wall or exposed
duct is required, they are also used for adjusti-
ing airflow patterns of air-conditioned spaces
and yet with an architectural appearance and
curved – back frames.
Return Air Grille (DG-15 H) Adjustable blades
DESCRIPTION
DG-15 and DR-15 are multi parallel and adj-
justable blade type with aerofoil section of
blades whick allow a smooth and uniform patt-
tern for quiet and low pressure drop applicat-
tion. Adjustable horizontal or vertical blades
can be supplied to control the airflow pattern
in either the horizontal or vertical planes. The
frame is curved - back as standard and can be
Return Air Register (DR-15H)
supplied in flat form as optional.
Single Deflection
MATERIAL & FINISH
High quality 1.5 mm thick extruded aluminium in matt silver anodized finish for blades and frame.
Nylon is used for bushings. White electrostatic polyester powder coating finish is available as a
standard.Other RAL standard colours are also available upon request. Gaskets are provided when
www.dasco.com.kw
specified as optional. Dampers are of extruded aluminium construction.
ORDERING CODE
Single Deflection
DOUBLE DEFLECTION SUPPLY AIR GRILLES & REGISTERS
GENERAL
Dasco supply air grilles and registers (DG-25
and DR-25) are designed to suit HVAC app-
plications where a high side wall or exposed
duct is required, they are also used for adjusti-
ing airflow patterns of air-conditioned spaces
and yet with an architectural appearance and
curved – back frames.
Supply Air Register (DR-25V)
DESCRIPTION
DG-25 and DR-25 are multi parallel and adj-
justable blade type with aerofoil section of
blades which allow a smooth and uniform airf-
flow pattern for quiet and low pressure drop
application. Adjustable horizontal, or vertical
blades can be supplied to control the airflow
pattern in either the horizontal or vertical
Supply Air Grille (Woodall Colour) (DG-25V)
planes. The frame is curved – back as standard
and can be supplied in flat form as optional.
Double Deflection
MATERIAL & FINISH
High quality 1.5 mm thick extruded aluminium in matt silver anodized finish for blades and frame.
Nylon is used for bushings. White electrostatic polyester powder coating finish is available as a
standard.Other RAL standard colours are also available upon request. Gaskets are provided when
www.dasco.com.kw
specified as optional. Dampers are of extruded aluminium construction.
ORDERING CODE
DG - 25a - W x H DR - 25a - W x H
Supply air Grille Supply air Register
(double deflection) (double deflection )
a = Blade setting a = Blade setting
H: Horizontal H: Horizontal
V: Vertical V: Vertical
Double Deflection
ENGINEERING DATA
DEFINITIONS
- Velocity pressure (Pd) : The forward moving force of an air stream within a duct measured in
(Dynamic pressure) mm (inch) W.G. of water.
- Static pressure (Ps) : The outward force within a duct measured in mm (inch)W.G. of water.
- Total pressure (Pt) : The sum of the velocity and static pressure in mm (Inch) W.G. of water.
- Outlet velocity (Vk) : Discharge or intake velocity of an outlet or inlet in m/s (fpm) measured
with an approved calibrated velometer at specified locations relative to
the face of the outlet or inlet.
- Terminal velocity : From an outlet, in m/s (fpm), is the highest sustained velocity in the
mixed air stream arbitrarily specified and used to determine throw.
- Throw : Of an outlet, in m (feet),is the distance from the center of the outlet to
a point in the mixed air stream where the highest sustained velocity of
the mixed air stream has been reduced to a specified level.
- Drop : The vertical distance , in m (feet), to the point in a horizontally proj-
jected air stream when the highest sustained velocity of the mixed air
stream has been reduced to a specified level.
- Spread : The maximum total width in m (feet) of the air pattern at the point of
terminal velocity.
- Aspect ratio : Ratio of the length / width of a rectangular air outlet or inlet.
- Area factor Ak : Of an outlet or inlet which is also a flow factor determined from the
discharge or intake2 velocity (Vk) and the volume flow rate.
Ak = Q / Vk in m or ft.
DEFLECTION SETTINGS
The figures above show the air pattern of different blade settings. It is noted that the throw and
drop will decrease as the angle of deflection increased.
Engineering Data
SPREAD REQUIREMENTS
The vane angle adjustment of grilles will affect the spread as follows:
1) For 0˚ deflection angle, the total spread of the air stream is one-third of the throw.
www.dasco.com.kw
2) For 22.5˚ deflection angle, the total spread of the air stream is about 45 percent of the
throw
3) For 45˚ deflection angle, the total spread of the air stream is two-third of the throw.
The total drop of an air stream is the sum of drop due to throw and drop due to temperature diff-
ference of air in the room and air at the grille.
Drop.(D)=Dthrow+Ddt
Engineering Data
NOISE CRITERIA
Table 1. The recommended delivery velocities Table 2. The recommended NC level for
for different applications ( ASHRAE GUIDE) different applications ( ASHRAE GUIDE )
NOTES
• The sound caused by an air outlet is directly proportional to the velocity of the air passing through it.
• The sound pressure level of 8-octave bands acceptable to human ears are estimated from table 2.
• Prior to selection of NC level from table 2, ambient sound existing within the space with air
conditioning equipment off or entering the space from outdoors must be considered.
AVAILABLE SIZES & CFM RANGE
Size (inch) CFM range Size (inch) CFM range Size (inch) CFM range
12 x 6 100 - 300 12 x 8 150 - 400 12 x 10 150 - 450
16 x 6 150 - 350 16 x 8 175 - 500 16 x 10 200 - 600
18 x 6 200 - 400 18 x 8 200 - 550 18 x 10 250 - 700
20 x 6 200 - 450 20 x 8 225 - 625 20 x 10 275 - 800
24 x 6 225 - 525 24 x 8 250 - 750 24 x 10 325 - 1000
30 x 6 300 - 700 30 x 8 325 - 950 30 x 10 400 - 1200
36 x 6 350 - 900 36 x 8 400 - 1150 36 x 10 500 - 1400
Size (inch) CFM range Size (inch) CFM range Size (inch) CFM range
12 x 12 200 - 550 16 x 14 300 - 850 24 x 18 600 - 1650
16 x 12 250 - 750 18 x 14 350 - 950 30 x 18 750 - 2100
18 x 12 300 - 850 20 x 14 400 - 1050 36 x 18 900 - 2500
20 x 12 325 - 925 24 x 14 450 - 1200 24 x 24 800 - 2300
24 x 12 400 - 1150 30 x 14 550 - 1600 30 x 24 1000 - 2800
30 x 12 500 - 1400 36 x 14 700 - 2000 36 x 24 1200 - 3200
36 x 12 600 - 1700 20 x 18 500 - 1400
Noise Criteria
BASIC PERFORMANCE DATA (Supply Air Grilles & Registers)
www.dasco.com.kw
Performance Data
BASIC PERFORMANCE DATA (Supply Air Grilles & Registers)
10
Performance Data
BASIC PERFORMANCE DATA (Supply Air Grilles & Registers)
www.dasco.com.kw
11
Performance Data
NOTES :
• 0º, 22 1/2˚, 45º are spreading angles (deflection settings).
• Throw is given in feet for 50 fpm terminal velocity.
• Static pressure drop is in inches W.G. for single deflection register with fully opened damper.
• Room effect is the difference between the sound power level of a terminal device and the
sound pressure level sensed by human ears in the room, and is affected by: Room size, sound
absorption characteristic of the room surfaces, ceiling height, space volume, distance of
listener to terminal location and number of terminals.
• The basic NC levels given in the tables of performance data are based on 10-db room absorption.
• All NC, static pressure and AK values given are for single deflection register with fully opened
damper and at zero degree of deflection.
(V1+V2+…. +Vk)
V (average) =
K
ALNOR-2220 - A TIP OR
ANEMOTHERM
12
Performance Data
SCREW HOLES LOCATIONS
www.dasco.com.kw
Number of Screw Holes
The sketches A to H shown on this page should be read against the chart shown below to determ-
mine the number of screw holes on any selected grille. Note that a rigid construction of large size
grilles is achieved through the addition of a U-beam (shown on the sketches) whenever the grille
size exceeds multiples of 18 inches.
13
Performance Data
ACCESORIES FOR GRILLES & REGISTERS
Equalizing Grid - EG
• The AD is designed as a transition adaptor permitting the attachment of round flexible or rigid
duct to a square neck diffuser.
• Galvanized steel construction. Powder coating paint is optional.
14
Accessories
CURVED BLADE CEILING GRILLES & REGISTERS
GENERAL
www.dasco.com.kw
curved blades are individually adjustable and
offer maximum air pattern and control.
The types of frames are to be specified by using model No. of frame as, curved back frame
(ordinary frame) “CF” or flanged frame as “FF”.
15
Ceiling Grilles
CURVED BLADE GRILLE WITH 3 WAYS DEFLECTION
(DG-16C-3W)
ORDERING CODE
16
Ceiling Grilles
RETURN AIR GRILLES & REGISTERS
GENERAL
Dasco return air grilles & registers (DG-14
and DR-14) are designed to suit HVAC applic-
cations where a high side wall or exposed duct
www.dasco.com.kw
is required, they are also used for adjusting air
flow patterns of air-conditioned spaces and
yet with an architectural and curved – back
frames.
Return Air Grille DG - 14H
DESCRIPTION
DG-14 and DR-14 are multi parallel fixed
blade type. Blades have aerofoil sections and
are fixed at 45º angle, which will allow smooth
and uniform airflow pattern for a quiet and
low-pressure drop applications. Grilles can
be supplied in horizontal blades (DG-14 H)
or vertical blades (DG-14 V) and the blades
Return Air Register DR - 14H are slightly overlapped to prevent any see-
through.
17
High quality 1.5mm thick extruded aluminium in matt silver anodized finish for blades & frame.
Plastic profiles used for holding blades in position. White electrostatic polyester powder coating
finish is available as a standard. Other RAL standard colours are also available upon request. Gask-
kets are provided when specified as optional. Dampers are of extruded aluminium construction.
ORDERING CODE
a = Blade setting
a = Blade setting
H : Horizontal
H : Horizontal
V : Vertical
V :Vertical
18
www.dasco.com.kw
NOISE CRITERIA
NOTE :
• Nc level range is correspondent with the CFM range for the same return grille size.
• All Nc levels given are based on (10 db) room absorption.
Return Air Grille (DG-14 V) Return Air Grille (DG-14 H - Decorative Frame)
(Woodall Colour)
19
20
Performance Data
EGG CRATE GRILLES & REGISTERS
GENERAL
Dasco egg crate type grilles and registers (DG-
17 and DR 17) are designed to suit HVAC app-
plications where a high sidewall or exposed
www.dasco.com.kw
duct is required. With there maximum free
area and minimum see – through, they are
mainly applicable when high air volume at low
pressure is desired. Their attractive appeara-
ance makes them suitable for other architect-
tural and decorative applications.
DESCRIPTION
DG-17 have an aluminium core consist of a
fixed egg crate grid of 1/2” x 1/2” opening
and 1/2” depth. The grid thickness is 0.024”.
An extruded aluminium rigid construction
frame with 0.052” thickness and 15/32” overlap
margin width provides heavy duty and noisel-
less performance.
DG-17 can also be supplied as a register with opposed blade damper to control the air volume (DR-17).
21
DG-17 and DR-17 egg crate style return air grilles and registers are made of heavy extruded alum-
minium alloy in matt silver anodized finish for both core and frame. White electrostatic polyester
powder coating finish is available as a standard. Other RAL standard colours are also available
upon request .
ORDERING CODE
Egg crate return air grille DG - 17 – W X H Egg crate return air register DR - 17 – W X H
22
www.dasco.com.kw
(22) (24) (27) (30) (32) (34) (37) (39)
12 x 8 0.54 162 216 270 324 380 435 485 540
16 x 6 (22) (24) (26) (28) (31) (34) (37) (38)
18 x 6 0.61 170 230 275 330 392 440 498 556
(21) (23) (25) (27) (30) (33) (35) (37)
12 x 10 0.68 207 276 345 414 483 552 621 690
20 x 6 (21) (23) (25) (26) (29) (33) (34) (37)
12 x 12
18 x 8 0.81 243 324 405 486 567 649 729 873
24 x 6 (21) (22) (24) (26) (29) (32) (34) (36)
18 x 10 1.02 304 385 481 577 674 770 866 964
30 x 6 (20) (22) (24) (25) (28) (31) (33) (36)
16 x 12
20 x 10 1.1 320 428 531 637 744 850 955 1063
24 x 8 (20) (22) (23) (25) (28) (30) (33) (35)
16 x 14
18 x 12 1.26 361 483 603 723 844 865 1086 1209
36 x 6 (20) (21) (22) (24) (26) (29) (32) (34)
20 x 12 1.37 432 576 720 864 1008 1152 1296 1440
24 x 10 (19) (21) (22) (23) (25) (28) (31) (34)
24 x 12 1.68 486 648 810 972 1134 1296 1458 1620
36 x 8 (19) (21) (21) (23) (25) (28) (31) (33)
30 x 10 1.75 510 707 884 1067 1238 1415 1591 1798
(19) (20) (21) (22) (24) (27) (30) (33)
24 x 14 1.96 593 790 988 1186 1384 1580 1778 1995
(18) (19) (20) (22) (24) (27) (30) (32)
20 x 18
30 x 12 2.18 662 889 1104 1325 1545 1774 1986 2205
36 x 10 (18) (19) (20) (22) (24) (26) (29) (31)
36 x 14 3.05 839 1119 1400 1680 1959 2241 2520 2799
(18) (19) (20) (21) (23) (26) (29) (30)
24 x 24 3.48 975 1300 1625 1950 2280 2600 2933 3290
(17) (18) (20) (22) (23) (26) (28) (30)
36 x 18 3.98 1155 1556 1930 2319 2705 3089 3480 3861
(17) (18) (19) (20) (21) (24) (27) (29)
30 x 24 4.32 1255 1674 2095 2511 2930 3348 3767 4185
(16) (17) (18) (20) (21) (23) (26) (28)
36 x 24 5.16 1507 2010 2511 3013 3515 4020 4519 5022
(16) (17) (18) (19) (20) (22) (24) (27)
NOTE :
All NC levels given are based on 10 db room absorption.
23
Performance Data
DOOR GRILLES
GENERAL
Dasco door grilles (DDR-200) are non-vision
door grilles but can be used as transfer grilles
for walls and partition openings, with an att-
tractive appearance. The DDR-200 is a heavy-
duty type for mass activity areas such as gymn-
nasiums…etc.
Door Grille (Woodall Colour) (DDR - 200)
Backside View
DESCRIPTION
DDR-200 is constructed of a main frame inc-
cluding the core of V-bars and an auxiliary
frame for thickness adjustment from 33mm to
55mm. DDR-200S having the same construct-
tion but with mullions (supporting bars) set at
regular intervals to give strength and rigidity to
the grille, this type can also be equipped with
opposed blade damper for air volume control
Door Grille (Woodall Colour) (DDR - 200) (DDR-200SD).
Door grilles can be provided with fly screen
fixed on main frame as optional.
24
Door Grilles
www.dasco.com.kw
Door Grille (DDR - 200)
ORDERING CODE
25
Door Grilles
BASIC PERFORMANCE DATA (Door Grilles)
12 x 12
24 x 6 0.610 61 122 183 244 305 386 427 488
30 x 8
16 x 10
0.690 69 138 207 276 345 414 483 552
20 x 8
24 x 8
0.840 84 168 252 336 420 504 583 672
16 x 12
18 x 12
0.940 94 188 282 376 470 564 658 752
16 x 14
24 x 10
1.090 109 218 327 436 545 654 763 872
20 x 12
24 x 12
1.280 128 256 384 512 640 768 896 1024
20 x 14
30 x 12
1.640 164 328 492 656 820 984 1148 1312
20 x 18
36 x 12
1.980 198 396 594 792 990 1188 1386 1584
30 x 14
30 x 16
2.200 220 440 660 880 1100 1320 1540 1760
24 x 20
36 x 16
2.825 282 565 848 1130 1412 1695 1978 2260
30 x 20
30 x 24 3.450 345 690 1035 1380 1725 2070 2415 2760
36 x 24 4.200 420 840 1260 1680 2100 2520 2940 3360
48 x 20 4.700 470 940 1410 1880 2350 2820 3290 3760
48 x 24 5.640 564 1128 1692 2256 2820 3384 3948 4512
36 x 36 6.488 640 1280 1920 2560 3200 3840 4480 5120
48 x 36 8.500 850 1700 2550 3400 4250 4100 5950 6800
26
Performance Data
ACCESS DOORS
GENERAL
Dasco access doors (DGH – 14 H/V) are hinged type return air grilles. They are mainly for maint-
tenance purposes, hence are constructed of hinged double frame, with nut locking devise to open
and close easily. Special types are available with an aluminium sheet cover for better architectural
www.dasco.com.kw
appearance (DGH – 14 HAC).
DESCRIPTION
DGH–14H/V are made from extruded alum-
minium construction. They are multi parall-
lel fixed blades having aerofoil sections and
are fixed at 45º inclination angle either in the
horizontal or vertical directions. The double-
hinged frame is of an attractive curved-back
type, however, it can be supplied in flat type
as optional. Dasco access doors can also be Access Door (DGH-14H)
provided with cleanable type air filter to the
required thickness (DGH – 14 HF). Access
doors are also available with aluminium cove-
er sheets and special access door frames are
available to fix gypsum board.
27
Access Doors
MATERIAL & FINISH
Frame and blades are of high quality 1.5mm thick extruded aluminium in matt silver anodized
finish. White electrostatic polyester powder coating finish is available as a standard. Other RAL
standard colours are also available upon request.
ORDERING CODE
AVAILABLE SIZES
DGH-14-H/V are available in the following standard sizes, however, other sizes can be supplied upon
request.
28
Access Doors
ACCESS DOORS
www.dasco.com.kw
Access Door
(Grille Type)
29
Access Doors
TESTING AND APPROVAL
Different samples from DASCO air terminal devices (grilles and registers) were
tested at ITS (Intertek Testing Services) labs in accordance with:
• Air diffusion council test code for grilles, registers and diffusers No. ADC 1062:
GRD-84.
• ISO 5219 “Air distribution and air diffusion laboratory aerodynamic testing and
rating of air terminal devices”.
• ANSI/ASHRAE 70-1991, “Method of testing for rating the performance of air
outlets and inlets”.
30
www.dasco.com.kw
DASCO offers a first class service by introducing a wide range of perfect polyester
powder coating on all of its aluminium products of air terminal devices.
The best quality of polyester powder Corro-Coat are used in according to the intern-
national standards (BS,ISO,DIN,ASTM). PE-F architectural grade polyester powders
are used perfectly with pre-treatment, electrostatic spray and curing in accordance
with the above standards recommendations. A complete range of RAL-Standard
colours are always available in addition to a vast range of special compound colours
as per our customers request.
RAL Standard Colour Chart Swatch
31
www.dasco.com.kw
www.dasco.com.kw
33
www.dasco.com.kw
Since 1962
Product Bulletin 131-D
www.dasco.com.kw
ISO 9001:2000