Beruflich Dokumente
Kultur Dokumente
Operational Amplifiers
ADTL082/ADTL084
FEATURES PIN CONFIGURATIONS
TL082/TL084 compatible OUT A 1 8 +V
Low input bias current: 10 pA maximum –IN A 2 ADTL082J 7 OUT B
+IN A 3 TOP VIEW 6 –IN B
Offset voltage
06275-001
(Not to Scale)
–V 4 5 +IN B
5.5 mV maximum (ADTL082A/ADTL084A)
9 mV maximum (ADTL082J/ADTL084J) Figure 1. 8-Lead SOIC_N (R-8)
±15 V operation
OUT A 1 8 +V
Low noise: 16 nV/√Hz
–IN A 2 ADTL082A 7 OUT B
Wide bandwidth: 5 MHz TOP VIEW
+IN A 3 6 –IN B
06275-002
(Not to Scale)
Slew rate: 20 V/μs –V 4 5 +IN B
CMRR: 80 dB minimum
Total harmonic distortion: 0.001% Figure 2. 8-Lead MSOP (RM-8)
Supply current: 1.2 mA typical
OUT A 1 14 OUT D
Unity-gain stable –IN A 2 13 –IN D
06275-003
OUT B 7 8 OUT C
Active filters
Industrial/process control Figure 3. 14-Lead SOIC_N (R-14)
Data acquisition
Sample and hold circuits OUT A 1 14 OUT D
Integrators –IN A 2 13 –IN D
Input buffering +IN A 3 ADTL084A 12 +IN D
TOP VIEW
+V 4 (Not to Scale)
11 –V
+IN B 5 10 +IN C
–IN B 6 9 –IN C
06275-004
OUT B 7 8 OUT C
GENERAL DESCRIPTION
The ADTL082 and ADTL084 are JFET input amplifiers that active filtering, data conversion, buffering, and power control
provide industry-leading performance over TL08x devices. and monitoring.
The ADTL082A and ADTL084A are improved versions of The A grade amplifiers are available in lead-free packaging. The
TL08x A, I, and Q grades. The ADTL082J and ADTL084J are standard grade amplifiers are available in both leaded and lead-
industry alternatives to the TL08x standard and C grades. free packaging.
The ADTL08x family offers lower noise, offset voltage, offset The ADTL082A and ADTL084A are specified over the extended
drift over temperature, and bias current over the TL08x. In industrial (−40°C to +125°C) temperature range. The ADTL082J
addition, the ADLT08x family has better common-mode and ADTL084J are specified over the commercial (0°C to 70°C)
rejection and slew rates. temperature range.
These op amps are ideal for various applications, including
process control, industrial and instrumentation equipment,
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Tel: 781.329.4700 www.analog.com
Trademarks and registered trademarks are the property of their respective owners. Fax: 781.461.3113 ©2007 Analog Devices, Inc. All rights reserved.
ADTL082/ADTL084
TABLE OF CONTENTS
Features .............................................................................................. 1 Thermal Resistance .......................................................................4
Applications....................................................................................... 1 Power Sequencing .........................................................................4
Pin Configurations ........................................................................... 1 ESD Caution...................................................................................4
General Description ......................................................................... 1 Typical Performance Characteristics ..............................................5
Revision History ............................................................................... 2 Outline Dimensions ..........................................................................8
Specifications..................................................................................... 3 Ordering Guide .......................................................................... 10
Absolute Maximum Ratings............................................................ 4
REVISION HISTORY
11/07—Rev. A to Rev. B
Changes to Ordering Guide .......................................................... 10
4/07—Rev. 0 to Rev. A
Changes to Table 1............................................................................ 3
1/07—Revision 0: Initial Version
Rev. B | Page 2 of 12
ADTL082/ADTL084
SPECIFICATIONS
VCC = ±15 V, VCM = 0 V, TA = 25°C, over all grades, unless otherwise noted.
Table 1.
J Grade A Grade
Parameter Symbol Conditions Min Typ Max Min Typ Max Unit
INPUT CHARACTERISTICS
Offset Voltage VOS 2 9 1.5 5.5 mV
0°C ≤ TA ≤ +70°C 10 8 mV
−40°C ≤ TA ≤ +125°C 9 mV
Offset Voltage Drift ΔVOS/ΔT 0°C ≤ TA ≤ +70°C 15 μV/°C
−40°C ≤ TA ≤ +125°C 10 μV/°C
Input Bias Current IB 2 100 2 100 pA
0°C ≤ TA ≤ +70°C 3 3 nA
−40°C ≤ TA ≤ +125°C 5 nA
Input Offset Current IOS 2 100 2 100 pA
0°C ≤ TA ≤ 70°C 3 3 nA
−40°C ≤ TA ≤ +125°C 5 nA
Input Voltage Range VCM −11 +15 −11 +15 V
Common-Mode Rejection Ratio CMRR VCM = −11 V to +15 V 80 86 80 86 dB
Input Impedance RIN 1012 1012 Ω
Large Signal Voltage Gain AVO RL = 2 kΩ, 100 200 100 200 V/mV
VO = −10 V to +10 V
0°C ≤ TA ≤ 70°C 90 200 90 200 V/mV
−40°C ≤ TA ≤ +125°C 50 200 V/mV
OUTPUT CHARACTERISTICS
Maximum Output Voltage Swing VO RL = 10 kΩ ±12 ±13.5 ±13 ±13.5 V
0°C ≤ TA ≤ +70°C ±12 ±13 V
−40°C ≤ TA ≤ +125°C ±13 V
RL = 2 kΩ ±12.5 ±13.3 V
0°C ≤ TA ≤ +70°C ±10 ±12 V
−40°C ≤ TA ≤ +125°C ±12 V
Short-Circuit Output Current ISC ±27 ±27 mA
POWER SUPPLY
Power Supply Rejection Ratio PSRR VDD = 8 V to 36 V 80 86 80 86 dB
Supply Current per Amplifier ISY 1.2 1.8 1.2 1.8 mA
0°C ≤ TA ≤ +70°C 1.9 1.9 mA
−40°C ≤ TA ≤ +125°C 2.0 mA
DYNAMIC PERFORMANCE
Slew Rate SR 20 20 V/μs
Gain Bandwidth Product GBP 5 5 MHz
Phase Margin φM 63 63 Degrees
Total Harmonic Distortion THD VIN = 6 V rms, f = 1 kHz, 0.001 0.001 %
AV = +1, RL = 2 kΩ
Channel Separation CS f = 10 kHz 120 120 dB
NOISE PERFORMANCE
Voltage Noise Density en f = 1 kHz 16 16 nV/√Hz
Rev. B | Page 3 of 12
ADTL082/ADTL084
Rev. B | Page 4 of 12
ADTL082/ADTL084
12 RL = 2kΩ
12
10 10
VSY = ±10V
8 8
6 6
VSY = ±5V
4 4
VSY = ±15V
2 2
0 0
06275-005
06275-008
100 1k 10k 100k 1M 10M –75 –50 –25 0 25 50 75 100 125
FREQUENCY (Hz) TA FREE-AIR TEMPERATURE (°C)
Figure 5. Maximum Peak Output Voltage vs. Frequency Figure 8. Maximum Peak Output Voltage vs. Free-Air Temperature
16 16
RL = 10kΩ
VSY = ±15V
VSY = ±15V TA = 25°C
14 14 TA = 25°C
12 12
10 10
VSY = ±10V
8 8
6 6
VSY = ±5V
4 4
2 2
0 0
06275-006
06275-009
100 1k 10k 100k 1M 10M 100 1k 10k
FREQUENCY (Hz) RL LOAD RESISTANCE (Ω)
Figure 6. Maximum Peak Output Voltage vs. Frequency Figure 9. Maximum Peak Output Voltage vs. Load Resistance
16 16
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
VSY = ±15V
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
RL = 10Ω
14 RL = 2kΩ 14 TA = 25°C
TA = –55°C
12 12
10 10
8 8
6 TA = +25°C 6
4 4
2 2
TA = +125°C
0 0
06275-010
06275-007
Figure 7. Maximum Peak Output Voltage vs. Frequency Figure 10. Maximum Peak Output Voltage vs. Supply Voltage
Rev. B | Page 5 of 12
ADTL082/ADTL084
1k 100
VSY = ±15V
NO SIGNAL
80
100
60
40
10
VSY = ±15V 20
VO = ±10V
RL = 2kΩ
1 0
06275-014
06275-011
–75 –50 –25 0 25 50 75 100 125 –75 –50 –25 0 25 50 75 100 125
TA FREE-AIR TEMPERATURE (°C) TA FREE-AIR TEMPERATURE (°C)
Figure 11. Large Signal Differential Voltage Amplification Figure 14. Total Power Dissipation vs. Free-Air Temperature
vs. Free-Air Temperature
1.4 4
VSY = ±15V
1.2
3
1.0
2
0.8
0.6
1
0.4
VSY = ±15V 0
0.2 NO SIGNAL
NO LOAD
0 –1
06275-015
06275-012
–75 –50 –25 0 25 50 75 100 125 –55 –35 –15 5 25 45 65 85 105 125
TA FREE-AIR TEMPERATURE (°C) TA FREE-AIR TEMPERATURE (°C)
Figure 12. Supply Current Per Amplifier vs. Free-Air Temperature Figure 15. Input Bias Current vs. Free-Air Temperature
2.0 10.0
TA = 25°C VSY = ±15V
1.8 NO SIGNAL
NO LOAD
1.6
IB INPUT BIAS CURRENT (nA)
1.0
ISY SUPPLY CURRENT (mA)
1.4
1.2
1.0 0.1
0.8
0.6
0.01
0.4
0.2
0 0.001
06275-016
06275-013
±4 ±5 ±6 ±7 ±8 ±9 ±10 ±11 ±12 ±13 ±14 ±15 –55 –35 –15 5 25 45 65 85 105 125
VSY SUPPLY VOLTAGE (V) TA FREE-AIR TEMPERATURE (°C)
Figure 13. Supply Current vs. Supply Voltage Figure 16. Input Bias Current vs. Free-Air Temperature
Rev. B | Page 6 of 12
ADTL082/ADTL084
6 90
VSY = ±15V VSY = ±15V
OUTPUT TA = 25°C 70
2 60
(nV/√Hz)
50
0
40
–2 30
INPUT 20
–4
10
–6 0
06275-017
06275-020
–2 0 2 4 6 8 10 1 10 100 1k 10k
TIME (µs) FREQUENCY (Hz)
Figure 17. Large Signal Response Figure 20. Voltage Noise Density vs. Frequency
0.15 1
VSY = ±15V
0.05
0 0.01
VSY = ±15V
–0.05 RL = 2kΩ
CL = 100pF
TA = 25°C 0.001
–0.10
–0.15 0.0001
06275-018
06275-021
–0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 10 100 1000 10000 100000
ELAPSED TIME (µs) FREQUENCY (Hz)
Figure 18. Small Signal Response Figure 21. Total Harmonic Distortion vs. Frequency
95
CMRR COMMON MODE REJECTION RATIO (dB)
VSY = ±15V
94
93
92
91
90
89
06275-019
Rev. B | Page 7 of 12
ADTL082/ADTL084
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
8 5
4.00 (0.1574) 6.20 (0.2441)
3.80 (0.1497) 1 5.80 (0.2284)
4
012407-A
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
3.20
3.00
2.80
8 5 5.15
3.20
4.90
3.00
4.65
2.80 1
4
PIN 1
0.65 BSC
0.95
0.85 1.10 MAX
0.75
0.80
0.15 0.38 8° 0.60
0.23
0.00 0.22 0° 0.40
0.08
COPLANARITY SEATING
0.10 PLANE
Rev. B | Page 8 of 12
ADTL082/ADTL084
8.75 (0.3445)
8.55 (0.3366)
14 8
4.00 (0.1575) 6.20 (0.2441)
1
3.80 (0.1496) 7 5.80 (0.2283)
060606-A
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
5.10
5.00
4.90
14 8
4.50
4.40 6.40
BSC
4.30
1 7
PIN 1
1.05 0.65
1.00 BSC
0.20
0.80 1.20
MAX 0.09 0.75
8° 0.60
0.15 0.30 0° 0.45
0.05 SEATING
0.19 PLANE COPLANARITY
0.10
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Rev. B | Page 9 of 12
ADTL082/ADTL084
ORDERING GUIDE
Model Temperature Range Package Description Package Option Branding
ADTL082JR 0°C to +70°C 8-Lead SOIC_N R-8
ADTL082JR-REEL 0°C to +70°C 8-Lead SOIC_N R-8
ADTL082JR-REEL7 0°C to +70°C 8-Lead SOIC_N R-8
ADTL082JRZ 1 0°C to +70°C 8-Lead SOIC_N R-8
ADTL082JRZ-REEL1 0°C to +70°C 8-Lead SOIC_N R-8
ADTL082JRZ-REEL71 0°C to +70°C 8-Lead SOIC_N R-8
ADTL082ARZ1 −40°C to +125°C 8-Lead SOIC_N R-8
ADTL082ARZ-REEL1 −40°C to +125°C 8-Lead SOIC_N R-8
ADTL082ARZ-REEL71 −40°C to +125°C 8-Lead SOIC_N R-8
ADTL082ARMZ-R21 −40°C to +125°C 8-Lead MSOP RM-8 A18
ADTL082ARMZ-REEL1 −40°C to +125°C 8-Lead MSOP RM-8 A18
ADTL084JR 0°C to +70°C 14-Lead SOIC_N R-14
ADTL084JR-REEL 0°C to +70°C 14-Lead SOIC_N R-14
ADTL084JR-REEL7 0°C to +70°C 14-Lead SOIC_N R-14
ADTL084JRZ1 0°C to +70°C 14-Lead SOIC_N R-14
ADTL084JRZ-REEL1 0°C to +70°C 14-Lead SOIC_N R-14
ADTL084JRZ-REEL71 0°C to +70°C 14-Lead SOIC_N R-14
ADTL084ARZ1 −40°C to +125°C 14-Lead SOIC_N R-14
ADTL084ARZ-REEL1 −40°C to +125°C 14-Lead SOIC_N R-14
ADTL084ARZ-REEL71 −40°C to +125°C 14-Lead SOIC_N R-14
ADTL084ARUZ1 −40°C to +125°C 14-lead TSSOP RU-14
ADTL084ARUZ-REEL1 −40°C to +125°C 14-lead TSSOP RU-14
1
Z = RoHS Compliant Part.
Rev. B | Page 10 of 12
ADTL082/ADTL084
NOTES
Rev. B | Page 11 of 12
ADTL082/ADTL084
NOTES
Rev. B | Page 12 of 12