Beruflich Dokumente
Kultur Dokumente
FURAN C
Description Application
Furan ‘C’ is primarily a bedding and jointing mortar for The mortar comprises a solution and a catalysed
fixing carbon bricks and tiles in temperate climates (15 powder. Nominal mortar joints of up to 4mm are
o
- 30 C). It is provided in two-component format, a recommended. Values are an intended guide.
Furan solution and a catalysed carbon filler powder.
Mixing Ratio 2 parts powder to 1 part solution
Typical Uses
Furan ‘C’ is recommended as a jointing and bedding By weight ~25kg powder to 12.5kg solution
mortar in most applications where strong acid/alkali By volume ~4L powder to 1L solution
materials are present, in particular for general tiling /
masonry work and for trenches, pits and storage Using an inclined mixer or paddle mixer, place the
areas. As Furan ‘C’ is also impervious, it is ideal for powder in mixing vessel and add the solution. Mix
fixing linings in holding vessels. It can be used in thoroughly for at least 3 minutes; the powder will ‘wet’
conjunction with glass cloth and mats, to build up an out to mortar.
in-site tank lining. Application should be made with either float or trowel
to all jointing surfaces to ensure a complete chemical
Advantages barrier. All tools and equipment should be cleaned off
In addition to its excellent chemical resistance, Furan with solvents and damp cloths to ensure their
‘C’ is a fast setting product, with impressive continued use. If any mortar has spread over on to the
mechanical properties. It also offers impressive tiles or bricks and a tidy clean finish is required, rub the
resistance against solvents and organic compounds. It tiles or bricks, with a damp cloth before setting takes
is a furfural – free composition. It can be used for place. After setting, it will be impossible to clean off
operating conditions up to 180°C. any overspill mortar.
Page 1 of 2
Coverage and is compulsory for closed or indoor applications.
For fully bedded and jointed (4mm) bricks of The instructions on storage, fire and explosion are to
dimensions: be observed. No releases to the sewers or drains are
to be permitted under any circumstances. Always refer
Brick/Tile Powder Solution Unit to MSDS data sheets for hazard and transport
230x114x65mm 2 information.
14 7 Kg/m
(Wall – 114mm)
230x114x38mm 2 Warranty
7 3.5 Kg/m
(Floor – 38mm) We warrant that our products will conform to the
230x114x20mm 2 description contained in the order and that we have
6 3 Kg/m good title in all goods sold. WE PROVIDE NO
(Floor – 20mm)
WARRANTY, WHETHER OF MERCHANTABILITY,
Values are approximate requirements. FITNESS FOR PURPOSE, OR OTHERWISE,
EXPRESS OR IMPLIED, OTHER THAN AS
Standard Packing EXPRESSELY SET FORTH HEREIN. We are glad to
Powder – 25kg lined polyweave bags (40 per pallet) offer suggestions or to refer you to customers using
Solution – 25kg in 25L UN drums (24 per pallet) ACCS Ltd cements and compounds for similar
applications. Users shall determine the suitability of the
Storage product for intended application before using, and
Store in a cool, dry, frost-free place. Normal storage users assume all risk and liability whatsoever in
conditions in up to 25°C should provide shelf life of: connection therewith regardless of any suggestions as
Powder – 12 months to application or construction. In no event shall we be
Solution – 12 months liable hereunder or otherwise for incidental or
Do not store a combined stack of solution and powder consequential damages. Our liability and your
components. Accidental leakage could lead to flash exclusive remedy hereunder or otherwise, in law or in
setting of material, producing smoke. equity, shall be expressly limited to our replacement of
non-conforming goods at our factory or, at our sole
Safety option, to repayment of the purchase price of non-
Safety data information available on request. Adequate conforming goods.
ventilation must be provided whilst work is in progress
Technical Data
Disclaimer
The technical data contained in this document represents the current state of our product knowledge and
is for information purposes only. It does not constitute a guarantee or specification.
Page 2 of 2